Dergiler / Politeknik Dergisi / 2018 / Cilt: 21 - Sayı: 4

Ahşap Koruyucuların Sapsız Meşe (Quercus Petreae L.) Ağacının Yanma Özelliklerine Etkileri

The Effects of Wood Preservatives on the Combustion Characteristics of Sessile Oak (Quercus Petreae L.)

Sayfa
805–811
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Sonuç olarak; emprenye uygulamaları toplam yanma süresini %15-18 arasında arttırmış, yıkılma süresini azaltmıştır.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışma, ahşap koruyucu ile emprenye edilmiş, üst yüzey işlemleri uygulanmış sapsız meşe (Quercus petraea L.) odununun yanma özelliklerini belirlemek amacıyla yapılmıştır.
📊
Temel Bulgular & Veri:Bu maksatla ASTM–E 160-50 ‘ye göre hazırlanan sapsız meşe örnekleri ASTM-D 1413-76 ‘ya göre tanalith-E ve wolmanit-CB ile emprenye edilmiş, ASTM-D 3023’ e göre sentetik ve su bazlı vernik ile verniklenmiştir.
💡
Sonuç & Katkı:Sonuç olarak; emprenye uygulamaları toplam yanma süresini %15-18 arasında arttırmış, yıkılma süresini azaltmıştır.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu çalışma, ahşap koruyucu ile emprenye edilmiş, üst yüzey işlemleri uygulanmış sapsız meşe (Quercus petraea L.) odununun yanma özelliklerini belirlemek amacıyla yapılmıştır. Bu maksatla ASTM–E 160-50 ‘ye göre hazırlanan sapsız meşe örnekleri ASTM-D 1413-76 ‘ya göre tanalith-E ve wolmanit-CB ile emprenye edilmiş, ASTM-D 3023’ e göre sentetik ve su bazlı vernik ile verniklenmiştir. Yanma deneyi, alev kaynaklı yanma (CWF), kendi kendine yanma (CWOF)ve kor halde yanma (ECP) olmak üzere 3 aşamada gerçekleştirilmiştir. Yanma deneyi ile ağırlık kaybı, toplam yanma süresi, yıkılma süresi ve CWF, CWOF ve ECP periyotlarındaki yanma sıcaklık değerleri belirlenmesi amaçlanmıştır. Sonuç olarak; emprenye uygulamaları toplam yanma süresini %15-18 arasında arttırmış, yıkılma süresini azaltmıştır. Vernik çeşitlerin tam tersi sonuçlar elde edilmiş, toplam yanma süresi %19-21 arasında azalmış, yıkılma süresi %10-22 arasında artmıştır. Alev kaynaklı aşamasında yanma sıcaklığı en yüksek su bazlı vernikli (490 o C), en düşük vernik uygulanmayan örneklerde (458 o C), alev kaynağı olamadan kendi kendine yanmada en yüksek su bazlı vernikte (572 o C), en düşük sentetik vernik uygulanan örneklerde (544 o C), kor halde yanmada en yüksek sıcaklık vernik uygulanmayan örneklerde (306.5 o C), en düşük sentetik vernik uygulanan örneklerde (262.7 °C) elde edilmiştir.

Abstract

This study carried out to determine the combustion properties of the sessile oak wood (Quercus petraea L.) which impregnated with wood preservative and subjected to surface treatments. For this purpose, the samples, which were prepared from sessile oak wood according to ASTM–E 160-50 combustion principles, impregnated with wolmanit-CB (WC) and tanalith-E (T) in accordance with ASTM-D 1413-76 and then synthetic (St) and Water-based (wb) varnishes were applied according to ASTM-D 3023. The combustion test was carried out in 3 stages, combustion with flame (CWF), self-combustion without flame source (CWOF) and ember combustion stage (ECP). It was aimed to determine the combustion temperature values in CWF, CWOF and ECP stage, weight loss, total combustion time and demolition time.As a result, impregnation applications have increased the total combustion time to between 15-18% and reduced the demolition period. The exact opposite results were obtained for the varnish types, the total combustion time was reduced by 19-21% and the demolition time increased by 10-22%. In CWF stage, the highest temperature was obtained in water-based varnished samples (490 °C), the lowest in non-varnished samples (458 °C); in CWOF stage the highest temperature in water-based varnished samples (572 °C), the lowest in synthetic varnished samples (544 °C); and in ECP stage the highest temperature in non-varnished samples (306.5 °C), the lowest in the samples with the synthetic varnished (262.7 °C).

🔖

Bu Makaleye Atıf Yap

ATAR, M., YAŞAR, Ş. Ş. (2022). Ahşap Koruyucuların Sapsız Meşe (Quercus Petreae L.) Ağacının Yanma Özelliklerine Etkileri. Politeknik Dergisi, Cilt: 21 - Sayı: 4, 805–811. https://ajindex.com/articles/588478

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Archer K. Lebow S., “Wood preservation,” Prim. Wood Process. Princ. Pract., 297–338, (2006). Keskin H. and Dağlıoğlu N., “Effects of impregnation with Tanalith-E on the compression strength of some woods”, Journal of Polytechnic, 20(3): 711-716, (2017).
  2. Yasar ŞŞ., Fidan MS., Yaşar M., Atar M., Alkan E., “Combustion properties of impregnated spruce ( Picea orientalis L.) wood. Construction and Building Materials, 143: 574–579. https://doi.org/10.1016/j.conbuildmat.2017.03.141, (2017).
  3. Fidan MS., Yaşar ŞŞ., Yaşar M., Atar M., Alkan E., “Characterization of the Combustion Parameters of Impregnated and Varnished Cedar Wood ( Cedrus libani )”, Forest Products Journal, 66(5–6): 290–299, (2016).
  4. Yasar ŞŞ., Fidan MS., Yaşar M., Atar M., “Influences of Seasonal Alterations on The Burning Characteristics of Impregnated and Surface Treated Chestnut (Castanea Sativa Mill) Wood”, Wood Research, 61: 399–412, (2016).
  5. Fidan MS., Yaşar ŞŞ., Yaşar M., Atar M., Alkan E., “Effect of seasonal changes on the combustion characteristics of impregnated cedar (Cedrus libani A. Rich.) wood”. Construction and Building Materials, 106: 711–720, (2016). Ibach RE., “Biological Properties of Wood” Handb. Wood Chem. Wood Compos., 5: 99–126, (2013).
  6. US EPA, O. (n.d.). "Overview of Wood Preservative Chemicals". website. [Online]: Access, URL: https://www.epa.gov/ingredients-used-pesticide- products/overview-wood-preservative-chemicals, (2017). Browne F., “Theories of the combustion of wood and its control,” Collections, (2136): 72, (1958). Ibach R.E., “Biological Properties of Wood”. Handbook of Wood Chemistry and Wood Composites, 5: 99–126, (2013).
  7. McIntyre C.R., Burley J., Evans J., Youngquist J., (Eds.), “Protection from Fire” in Encyclopedia of Forest Science, Academic Press,
  8. San Diego, CA, 1283–1288, (2004).
  9. Jiang J., Li J., Gao Q., “Effect of flame retardant treatment on dimensional stability and thermal degradation of wood”. Construction and Building Materials, 75: 74–81, (2015).
  10. Bozkurt A., Göker Y., Erdin N., “Emprenye Tekniği”, Istanbul University,. Faculty of Forestry, 3779/425, 429 s, (1993).
  11. Lee HL., Chen GC., Rowell RM., “Thermal properties of wood reacted with a phosphorus pentoxide–amine system”, J. Appl. Polym. Sci. 91: 2465–2481, (2004).
  12. Lee HL., Chen GC., Rowell RM., “Fungal decay resistance of wood reacted with phosphorus pentoxide–amine system”, Holzforchung 58, 311– 315, (2004).
  13. Keskin H., Atar M., Izciler M., “Impacts of impregnation chemicals on combustion properties