Dergiler / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 3

Ankastre Tabakalı Kompozit Kare Plakaların yer Değişimi Davranışı Üzerinde Fiber Oryantasyon Açılarının Etkilerinin İncelenmesi

Investigation of effects of fiber orientation angles on deflection behavior of cantilever laminated composite square plates

Sayfa
633–639
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Varyans analizi yanıtlar üzerinde güçlü etkili kontrol faktörleri ve onların yüzde katkılarını analizi için gerçekleştirildi.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, kendi ağırlığına maruz bırakılmış ankastre tabakalı kompozit plakaların yer değişimi yanıtı sonlu elemanlar ve Taguchi metotları kullanılarak analiz edilmiştir.
📊
Temel Bulgular & Veri:Plakalar 12 tabakalı cam fiberle güçlendirilmiş polimer kompozitlerden yapılmıştır.
💡
Sonuç & Katkı:Varyans analizi yanıtlar üzerinde güçlü etkili kontrol faktörleri ve onların yüzde katkılarını analizi için gerçekleştirildi.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu çalışmada, kendi ağırlığına maruz bırakılmış ankastre tabakalı kompozit plakaların yer değişimi yanıtı sonlu elemanlar ve Taguchi metotları kullanılarak analiz edilmiştir. Plakalar 12 tabakalı cam fiberle güçlendirilmiş polimer kompozitlerden yapılmıştır. Tabakaların fiber oryantasyon açılarının sıralanması Taguchi L9 (33) ortogonal dizi kullanılarak yapıldı. Her dört tabaka kontrol faktörü olarak kabul edildi. Fiber oryantasyon açıları 10 derecenden 90 dereceye değiştirildi. Plakalar sonlu elemanlar yazılımı ANSYS kullanılarak modellendi. Sinyal gürültü oran analizi minimum yer değişim yanıtı için optimum seviyeli kontrol faktörlerini değerlendirmek için kullanıldı. Varyans analizi yanıtlar üzerinde güçlü etkili kontrol faktörleri ve onların yüzde katkılarını analizi için gerçekleştirildi.

Abstract

In this study, the deflection response of cantilever laminated composite square plates subjected to the weight of itself was analyzedusing finite element and Taguchi methods. The plates with 12 plies were made of glass fiber reinforced polymer composites(GFRP). The arrangements and fiber orientation angles of the plies were conducted using Taguchi’s L9 (33) orthogonal array. Eachfour plies was assumed to be control factor. Fiber orientation angles were varied from 10 to 90 in degree. Plates were modelledusing finite element software ANSYS Parametric Design Language. Analysis of signal-to-noise (S/N) ratio was used in order toevaluate the control factors with the optimum levels for minimum deflection response. Analysis of variance was carried out inorder to analyze the powerful influential control factors and their percent contributions on responses.

🔖

Bu Makaleye Atıf Yap

EVRAN, S. (2022). Ankastre Tabakalı Kompozit Kare Plakaların yer Değişimi Davranışı Üzerinde Fiber Oryantasyon Açılarının Etkilerinin İncelenmesi. Politeknik Dergisi, Cilt: 23 - Sayı: 3, 633–639. https://ajindex.com/articles/588439

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Sayyad A.S. and Ghugal Y.M., "Bending, buckling and free vibration of laminated composite and sandwich beams: A critical review of literature", Composite Structures, 171: 486-504, (2017)
  2. Rakočević M. and Vatin N., "Bending of Laminated Composite Plates", Applied Mechanics and Materials, 725-726: 667-73, (2015)
  3. Rakočević M. and Popović S., "Bending analysis of simply supported rectangular laminated composite plates using a new computation method based on analytical solution of layerwise theory", Archive of Applied Mechanics, 88: 671-89, (2018)
  4. Iyengar N.G.R. and Umaretiya J.R., "Deflection analysis of hybrid laminated composite plates", Composite Structures, 5: 15-32, (1986)
  5. Reddy B.S., Reddy A.R., Kumar J.S. and Reddy K.V.K., "Bending analysis of laminated composite plates using finite element method", International Journal of Engineering, Science and Technology, 4: 177-90, (2012). [6] Ćetković M. and Vuksanović D., "Bending, free vibrations and buckling of laminated composite and sandwich plates using a layerwise displacement model", Composite Structures, 88: 219-27, (2009)
  6. Maiti D.K. and Sinha P.K., "Bending, free vibration and impact response of thick laminated composite plates", Computers & Structures, 59: 115-29, (1996)
  7. Karama M., Abou Harb B., Mistou S. and Caperaa S., "Bending, buckling and free vibration of laminated composite with a transverse shear stress continuity model", Composites Part B: Engineering, 29: 223-34, (1998)
  8. Khdeir A.A. and Reddy J.N., "An exact solution for the bending of thin and thick cross-ply laminated beams", Composite Structures, 37: 195-203, (1997)
  9. Lee K.H., Lin W.Z. and Chow S.T., "Bidirectional bending of laminated composite plates using an improved zig-zag model", Composite Structures, 28: 283-94, (1994)
  10. Zhang Y.X. and Yang C.H., "Recent developments in finite element analysis for laminated composite plates", Composite Structures, 88: 147-57, (2009)
  11. Yam L.H., Wei Z., Cheng L. and Wong W.O., "Numerical analysis of multi-layer composite plates with internal delamination", Computers & Structures, 82: 627-37, (2004)
  12. MINITAB. Software (Minitab Inc State College, PA, USA) (wwwminitabcom)
  13. Ross P.J., Taguchi Techniques for Quality Engineering: McGraw-Hill International Editions, 2nd Edition, New York, USA; 1996
  14. ANSYS. Software (ANSYS Inc, Canonsburg, PA, USA) (wwwansyscom)
  15. ANSYS. Help (Version 13).