Dergiler / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 3

Nimonic 80A Alaşımının Johnson-Cook Model Parametrelerinin Sonlu Elemanlar Yöntemiyle Doğrulanması

Confirmation of johnson-cook model parameters for nimonic 80A alloy by finite element method

Sayfa
625–632
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu sapma miktarı, Nimonic 80A alaşımına ait belirlenen Johnson-Cook model parametrelerinin doğruluğunu kanıtlamaktadır..

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Nimonic 80A alaşımı, yüksek sürünme mukavemeti, oksidasyon direnci ve yüksek sıcaklıktaki korozyona karşı güçlü direnci nedeniyle tercih edilmektedir.
📊
Temel Bulgular & Veri:Bu makale Nimonic 80A süperalaşımının malzeme yapısal denklemini (Johnson-Cook parameters) belirlemek için yazılmıştır.
💡
Sonuç & Katkı:Bu sapma miktarı, Nimonic 80A alaşımına ait belirlenen Johnson-Cook model parametrelerinin doğruluğunu kanıtlamaktadır..
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Nimonic 80A alaşımı, yüksek sürünme mukavemeti, oksidasyon direnci ve yüksek sıcaklıktaki korozyona karşı güçlü direnci nedeniyle tercih edilmektedir. Bu makale Nimonic 80A süperalaşımının malzeme yapısal denklemini (Johnson-Cook parameters) belirlemek için yazılmıştır. Literatürdeki farklı malzeme yapısal denklemlerinin (Zerille Armstrong, Bodner Partom, JohnsonCook) arasından Johnson-Cook modeli tercih edilmiştir. Denklem parametrelerinin belirlenmesi için 3 farklı tipte basma testleri uygulanmıştır. Bunların ilki oda sıcaklığında gerçekleşen yarı-statik basma testleridir. Bu testler 10-3, 10-2 ve 10-1 s-1 gerinim hızlarında gerçekleştirilmiştir. Dolayısıyla bütün testler için referans gerinim hızı 10-3 seçilmiştir. İkinci test olarak oda sıcaklığında Split -Hopkinson çekme cihazı kullanılarak yüksek gerinim hızlarında (370 ~ 954 s-1) basma testleri gerçekleşmiştir. Son olarak referans gerinim hızında (10^-3 s^-1) yüksek sıcaklıklarda (24 ~ 200 °C) basma testleri yapılmıştır. Testlerin birbiri ile uygun olduğu gözlemlenmiş olup, bu testlerden elde edilen veriler ile malzemeye ait Johnson-Cook parametreleri belirlenmiştir. Son olarak, sonlu elemanlar yöntemi vasıtasıyla gerçekleştirilen basma testi simülasyonları parametrelerin uygunluğunu onaylamak adına ANSYS Workbench yazılımında yapılmıştır. Bu sonuçlar ışığında, deneysel ve simülasyon sonuçları arasında %3.23 sapma elde edilmiştir. Bu sapma miktarı, Nimonic 80A alaşımına ait belirlenen Johnson-Cook model parametrelerinin doğruluğunu kanıtlamaktadır..

Abstract

Nimonic 80A superalloy is frequently used due to its high creep resistance, oxidation resistance and high resistance to hightemperature corrosion. On the other hand, due to compatibility of simulation of plastic deformation processes, Johnson-Cook modelis chosen among the materials models such as Zerille Armstrong, Bordner Partom, Steinberg-Guinan etc. In this study, primarily,quasi-static compression tests were performed for 10-3, 10-2 and 10-1 s-1 strain rates at room temperature. Secondly, dynamiccompression tests were secondly conducted at high strain rates ranging from 370 to 954 s-1 using the Split Hopkinson Pressure Bar(SHPB) apparatus. Then, the compression tests were conducted at a temperature level from 24~200 °C at the reference strain rate.Johnson-Cook model parameters of Nimonic 80A were determined by analyzing the data obtained from the tests. Lastly, thecompression simulations with finite element method (FEM) were performed in ANSYS Workbench to confirm the accuracy of theparameters. In the light of the results, it was determined that there is an average of %3.23 deviation between the experimental andthe simulation values. The result showed that accuracy of the Johnson-Cook parameters for Nimonic 80A superalloy was verifiedwith FEM.

🔖

Bu Makaleye Atıf Yap

KORKMAZ, M. E., GÜNAY, M. (2022). Nimonic 80A Alaşımının Johnson-Cook Model Parametrelerinin Sonlu Elemanlar Yöntemiyle Doğrulanması. Politeknik Dergisi, Cilt: 23 - Sayı: 3, 625–632. https://ajindex.com/articles/588432

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Kim, D. K., Kim, D. Y., Ryu, S. H., and Kim, D. J., "Application of nimonic 80A to the hot forging of an exhaust valve head", Journal Of Materials Processing Technology, 113 (1–3): 148–152 (2001)
  2. Zhu, Y., Zhimin, Y., and Jiangpin, X., "Microstructural mapping in closed die forging process of superalloy Nimonic 80a valve head", Journal Of Alloys And Compounds, 509 (20): 6106–6112 (2011)
  3. Quan, G., Pan, J., and Wang, X., "Prediction of the Hot Compressive Deformation Behavior for Superalloy Nimonic 80A by BP-ANN Model", Applied Sciences, 6 (3): 66 (2016)
  4. Günay, M., Korkmaz, M. E., and Yaşar, N., "Finite element modeling of tool stresses on ceramic tools in hard turning", Mechanika, 23 (3) (3): 432–440 (2017)
  5. Korkmaz, M. E. and Günay, M., "Finite Element Modelling of Cutting Forces and Power Consumption in Turning of AISI 420 Martensitic Stainless Steel", Arabian Journal For Science And Engineering, 43 (9): 4863–4870 (2018)
  6. Gok, K., "Development of three-dimensional finite element model to calculate the turning processing parameters in turning operations", Measurement, 75: 57– 68 (2015)
  7. Parida, A. K. and Maity, K., "Numerical and experimental analysis of specific cutting energy in hot turning of Inconel 718", Measurement, 133: 361–369 (2019)
  8. Jain, A., Khanna, N., and Bajpai, V., "FE simulation of machining of Ti-54M titanium alloy for industry relevant outcomes", Measurement, 129: 268–276 (2018)
  9. Parida, A. K. and Maity, K., "Effect of nose radius on forces, and process parameters in hot machining of Inconel 718 using finite element analysis", Engineering Science And Technology, An International Journal, 20 (2): 687–693 (2017)
  10. Asif. M, M., Shrikrishana, K. A., and Sathiya, P., "Finite element modelling and characterization of friction welding on UNS S31803 duplex stainless steel joints", Engineering Science And Technology, An International Journal, 18 (4): 704–712 (2015)
  11. Parida, A. K. and Maity, K., "Comparison the machinability of Inconel 718, Inconel 625 and Monel 400 in hot turning operation", Engineering Science And Technology, An International Journal, 21 (3): 364–370 (2018)
  12. Şerban, D. A., Marsavina, L., Rusu, L., and Negru, R., "Numerical study of the behavior of magnesium alloy AM50 in tensile and torsional loadings", Archive Of Applied Mechanics, (1): 1–7 (2018)
  13. Dorogoy, A. and Rittel, D., "Determination of the johnson-cook material parameters using the SCS specimen", Experimental Mechanics, 49 (6):