Alsoby increasing the borax ratio in polyester samples, the contact angle increases and these results alsosupports the change in surface behavior for erosion rather than tracking.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study the effect of borax existence on tracking and erosion resistance of polyesters has beeninvestigated by means of defining contact angle and performing SEM analysis.
📊
Temel Bulgular & Veri:Samples with differentborax concentrations were tested under 4 kV AC voltage in an inclined plane tracking test apparatusprepared according to ASTM D2303 standard.
💡
Sonuç & Katkı:Alsoby increasing the borax ratio in polyester samples, the contact angle increases and these results alsosupports the change in surface behavior for erosion rather than tracking.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Abstract
In this study the effect of borax existence on tracking and erosion resistance of polyesters has beeninvestigated by means of defining contact angle and performing SEM analysis. Samples with differentborax concentrations were tested under 4 kV AC voltage in an inclined plane tracking test apparatusprepared according to ASTM D2303 standard. The results and SEM analysis indicate that addition ofborax mineral to test specimens prevents the formation of free carbon over the surface of thecomposite samples and hence the specimens are mostly damaged by the erosion of the surface. Alsoby increasing the borax ratio in polyester samples, the contact angle increases and these results alsosupports the change in surface behavior for erosion rather than tracking.
🔖
Bu Makaleye Atıf Yap
KUNTMAN, A., ERSOY, A. (2022). Surface properties of polyesters blended with borax mineral. Istanbul University Journal of Electrical and Electronics Engineering, Cilt: 7 - Sayı: 2, 387–391. https://ajindex.com/articles/543776
M.Ugur, A.Kuntman and A.Ersoy, “A Study on the ageing process for polyester resin using improved Weibull statistics”, Electrical Engineering, Springer-Verlag Heidelberg, Vol. 85, No. 5, pp. 283-288, 2003
A. Ersoy, A. Kuntman, M. Uğur, “Kaçak Akım ve Harmonik Bileşenler Kullanılarak Bor Katkılı Polimerik Yalıtkanların Yaşlanma Sürecinin İncelenmesi”, 15. Sinyal Işleme ve Iletişim Uygulamaları Kurultayı SIU 2007, 11-13 Haziran 2007, Eskişehir
Standard test methods for liquid contaminant, inclined plane tracking and erosion of insulating materials, ASTM D2303, pp.258-270, 1983
S. M. Gubanski and A. E. Vlastos, “Wettability of naturally aged silicone and EPDM composite insulators”, IEEE Transactions on Power Delivery, Vol. 5, No. 3, pp. 1527- 1535, 1990
D. H. Han, H. Y. Park, D. P. Kang and H. G. Cho, “Effects of added silicone oils on the surface characteristics of silicone rubber”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 9, No. 2, pp. 323-328, 2002
S. H. Kım, E. A. Cherney and R. Hackam, “Hydrophobic behaviour of ınsulators coated with RTV silicone rubber”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol. 27 No. 3, pp. 610-622, 1992. [7]. N. D. Geyter, R. Morent and C. Leys, “Surface modification of a polyester non-woven with a dielectric barrier discharge in air at medium pressure”, Surface and Coatings Technology, Vol. 201, pp. 2460-2466, 2006.