KaydedilenlerDerginizi ekleyin

Dergiler / International Journal of Innovative Engineering Applications / 2021 / Cilt: 5 - Sayı: 2

Investigation Of Cryogenic Cooling Effect With Finite Element Method In Micro Milling Of Ti6Al4V Material

Erkan BAHÇE
Mehmet Akif OYMAK
İbrahim GEZER
Sayfa
93–100
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result, indicated that at the cutting velocity of 100 m/min, cryogenic cooling on the workpiece and cutting edges has caused into decreasing %57 of cutting temperature also by %54 lower tool wear was observed on the internal tool cryogenic, by %15 the shear stresses decreased on wacec in comparison to dry cutting.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The objective of this study is to see for micro-milling of Ti6Al4V in the different parameters, how wear occurs on the face of the tool and how to evolve cutting temperature, forces, and chip formations with FEM.
📊
Temel Bulgular & Veri:The effects of dry, liquid coolant and LN2-based cryogenic cooling applications at 50,100,150 m/s cutting speeds and 1,2,3 μm/dev feed rate were compared in micro-milling of Ti6Al4V alloy.
💡
Sonuç & Katkı:As a result, indicated that at the cutting velocity of 100 m/min, cryogenic cooling on the workpiece and cutting edges has caused into decreasing %57 of cutting temperature also by %54 lower tool wear was observed on the internal tool cryogenic, by %15 the shear stresses decreased on wacec in comparison to dry cutting.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

The objective of this study is to see for micro-milling of Ti6Al4V in the different parameters, how wear occurs on the face of the tool and how to evolve cutting temperature, forces, and chip formations with FEM. The effects of dry, liquid coolant and LN2-based cryogenic cooling applications at 50,100,150 m/s cutting speeds and 1,2,3 μm/dev feed rate were compared in micro-milling of Ti6Al4V alloy. At different parameters, internal and workpiece-cutting edges cryogenic (wacec) are simulated temperatures were observed. Cryogenic cooling, dry and liquid coolant applications perceived that tool wear, chip formation, strain, stresses, and shear forces interpreted with the FEM. Also, a mesh model based on Arbitrary Lagrangian-Eulerian (ALE) simulations and the Johnson-Cook Plasticity model for material plasticity failure criterion are used in this study. As a result, indicated that at the cutting velocity of 100 m/min, cryogenic cooling on the workpiece and cutting edges has caused into decreasing %57 of cutting temperature also by %54 lower tool wear was observed on the internal tool cryogenic, by %15 the shear stresses decreased on wacec in comparison to dry cutting.

🔖

Bu Makaleye Atıf Yap

BAHÇE, E., OYMAK, M. A., GEZER, İ. (2022). Investigation Of Cryogenic Cooling Effect With Finite Element Method In Micro Milling Of Ti6Al4V Material. International Journal of Innovative Engineering Applications, Cilt: 5 - Sayı: 2, 93–100. https://ajindex.com/articles/541203

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Chae, J., Park, S. S., & Freiheit, T. (2006). Investigation of micro-cutting operations. International Journal of Machine Tools and Manufacture, 46(3-4), 313-332
  2. Özel, T., Bártolo, P. J., Ceretti, E., Gay, J. D. C., Rodriguez, C. A., & Da Silva, J. V. L. (Eds.). (2016). Biomedical devices: design, prototyping, and manufacturing. John Wiley & Sons. [3] 4- Robinson, G. M., & Jackson, M. J. (2005). A review of micro and nanomachining from a materials perspective. Journal of Materials Processing Technology, 167(2-3), 316-337
  3. Ezugwu, E. O., & Wang, Z. M. (1997). Titanium alloys and their machinability—a review. Journal of materials processing technology, 68(3), 262-274
  4. Robinson, G. M., Jackson, M. J., & Whitfield, M. D. (2007). A review of machining theory and tool wear with a view to developing micro and nano machining processes. Journal of Materials Science, 42(6), 2002-2015
  5. Dadgari, A., Huo, D., & Swailes, D. (2018). Investigation on tool wear and tool life prediction in micro-milling of Ti-6Al4V. Nanotechnology and Precision Engineering, 1(4), 218- 225
  6. Vazquez, E., Gomar, J., Ciurana, J., & Rodríguez, C. A. (2015). Analyzing effects of cooling and lubrication conditions in micromilling of Ti6Al4V. Journal of Cleaner Production, 87, 906-913
  7. Su, Y., He, N., Li, L., & Li, X. L. (2006). An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al4V. Wear, 261(7-8), 760-766
  8. Debnath, S., Reddy, M. M., & Yi, Q. S. (2014). Environmental friendly cutting fluids and cooling techniques in machining: a review. Journal of cleaner production, 83, 33-47. [10] 11-. Pervaiz, S., Deiab, I., Rashid, A., & Nicolescu, M. (2017). Minimal quantity cooling lubrication in turning of Ti6Al4V: influence on surface roughness, cutting force and tool wear. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(9), 1542-1558
  9. Park, K. H., Suhaimi, M. A., Yang, G. D., Lee, D. Y., Lee, S. W., & Kwon, P. (2017). Milling of titanium alloy with cryogenic cooling and minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing, 18(1), 5-14
  10. Jebaraj, M., & Pradeep Kumar, M. (2019). Effect of cryogenic CO2 and LN2 coolants in milling of aluminum alloy. Materials and Manufacturing Processes, 34(5), 511- 520
  11. Shah, P., & Khanna, N. (2020). Comprehensive machining analysis to establish cryogenic