Dergiler / International Dental Research / 2022 / Cilt: 12 - Sayı: 1

Effect of the thickness and translucency of the lithium disilicate veneer ceramic on the optical properties of bilayered zirconia

Sayfa
1–8
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Results: The optical properties (∆E76, ∆E00, TP76, TP00, and OP) of the bilayered zirconia-based ceramics were significantly affected by the thickness and translucency of the lithium disilicate veneer ceramics (p

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Aim: This study evaluates the effect of lithium disilicate veneer ceramics on the color difference (∆Eab and ∆E00), translucency parameters (TPab and TP00), and opalescence parameter (OP) of different thicknesses and translucencies.
📊
Temel Bulgular & Veri:Methodology: Ten 0.5 mm thick zirconia core specimens were prepared, and sixty veneer ceramics in A2 shade were prepared from high translucence (HT) and low-translucence (LT) lithium disilicate glass ceramics (IPS e.max CAD) in three different thicknesses (0.5 mm, 0.7 mm, and 1 mm).
💡
Sonuç & Katkı:Results: The optical properties (∆E76, ∆E00, TP76, TP00, and OP) of the bilayered zirconia-based ceramics were significantly affected by the thickness and translucency of the lithium disilicate veneer ceramics (p
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

Aim: This study evaluates the effect of lithium disilicate veneer ceramics on the color difference (∆Eab and ∆E00), translucency parameters (TPab and TP00), and opalescence parameter (OP) of different thicknesses and translucencies. Methodology: Ten 0.5 mm thick zirconia core specimens were prepared, and sixty veneer ceramics in A2 shade were prepared from high translucence (HT) and low-translucence (LT) lithium disilicate glass ceramics (IPS e.max CAD) in three different thicknesses (0.5 mm, 0.7 mm, and 1 mm). The specimens were evaluated as bilayered structures, and group names were assigned based on the thickness of the core–veneer combinations (n = 10): E1 = (0.5 + 0.5), E2 = (0.5 + 0.7), and E3 = (0.5 + 1). A spectrophotometer (Vita EasyShade V) was used to measure the Commission Internationale de l'Elcairage (CIE) color coordinates L*, a*, and b*, and the ∆Eab, ∆E00, TPab, TP00, and OP values were calculated. A two way analysis of variance (ANOVA) and Tukey HSD tests (α = 0.05) and Pearson correlation tests (α = 0.01) were applied for statistical analysis. Results: The optical properties (∆E76, ∆E00, TP76, TP00, and OP) of the bilayered zirconia-based ceramics were significantly affected by the thickness and translucency of the lithium disilicate veneer ceramics (p

🔖

Bu Makaleye Atıf Yap

SAVAŞ, T. Y., SAVAŞ, A. (2022). Effect of the thickness and translucency of the lithium disilicate veneer ceramic on the optical properties of bilayered zirconia. International Dental Research, Cilt: 12 - Sayı: 1, 1–8. https://ajindex.com/articles/539433

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (4)

  1. Lee YK, Cha HS, Ahn JS. Layered color of all-ceramic core and veneer ceramics. J Prosthet Dent 2007;97:279-86. (Crossref) Luo XP, Zhang L. Effect of veneering techniques on color and translucency of Y-TZP. J Prosthodont 2010;19:465-70. (Crossref) Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: A review. Dent Mater 2011;27:97-108. (Crossref) Beuer F, Schweiger J, Eichberger M, Kappert HF, Gernet W, Edelhoff D. High-strength CAD/CAM-fabricated veneering material sintered to zirconia copings — A new fabrication mode for all-ceramic restorations. Dent Mater 2009;25:121-8. (Crossref) Sailer I, Pjetursson BE, Zwahlen M, Hammerle CH. A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part II: Fixed dental prostheses. Clin Oral Implants Res 2007;18 Suppl 3:86-96. (Crossref) Lee Y-K, Yu B, Zhao G-F, Lim JI. Effects of aging and HEMA content on the translucency, fluorescence, and opalescence properties of experimental HEMA-added glass ionomers. Dent Mater J 2010;29:9-14. (Crossref) Hunter RS. The measurement of appearance: John Wiley & Sons; 1987.
  2. Della Bona A, Nogueira AD, Pecho OE. Optical properties of CAD-CAM ceramic systems. J Dent 2014;42:1202-9. (Crossref) Lee YK, Lu H, Powers JM. Measurement of opalescence of resin composites. Dent Mater 2005;21:1068-74. (Crossref) Ward M, Tate W, Powers J. Surface roughness of opalescent porcelains after polishing. Oper Dent 1994;20:106-10.
  3. Bagis B, Turgut S. Optical properties of current ceramics systems for laminate veneers. J Dent 2013;41 24-30. (Crossref) Nogueira AD, Della Bona A. The effect of a coupling medium on color and translucency of CAD-CAM ceramics. J Dent. 2013;41 Suppl 3:e18-23. (Crossref) Yılmaz Savaş T, Aykent F. Effect of fabrication techniques on the optical properties of zirconia-based systems. J Prosthet Dent 2021;125:528.e1-.e8. (Crossref) Basso GR, Kodama AB, Pimentel AH, Kaizer MR, Bona AD, Moraes RR et al. Masking Colored Substrates Using Monolithic and Bilayer CAD-CAM Ceramic Structures. Oper Dent. 2017;42:387-95. (Crossref) Iravani M, Shamszadeh S, Panahandeh N, Sheikh-Al-Eslamian SM, Torabzadeh H. Shade reproduction and the ability of lithium disilicate ceramics to mask dark substrates. Restor Dent Endod 2020;45:e41. (Crossref) CIE Technical Report: Colorimetry. Vienna, Austria: CIE Central Bureau; 2004.
  4. Luo MR, Cui G, Rigg B. The development of