Data from the numerical results compare reasonably well with the experimental study.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:Nucleate pool boiling of distilled water on a plain copper surface has been investigated experimentally and modeled numerically.
📊
Temel Bulgular & Veri:Numerical simulations have been carried out using CLSVOF method using ANSYS 18.2.
💡
Sonuç & Katkı:Data from the numerical results compare reasonably well with the experimental study.
🔬Tür:Laboratuvar & Saha Deneyi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Nucleate Pool Boiling · Bubble Growth Rate · High-Speed Photography
Abstract
Nucleate pool boiling of distilled water on a plain copper surface has been investigated experimentally and modeled numerically. In the experimental study, bubble behavior on a single nucleation site was observed using high-speed photography and long-distance microscopy. Diameter for a single bubble growth was determined during the ebullition cycle via recordings. Numerical simulations have been carried out using CLSVOF method using ANSYS 18.2. To verify the simulation, the bubble growth period is compared with the results of the experimental study. Data from the numerical results compare reasonably well with the experimental study.
TETİK, T., URALCAN, I. Y. (2022). Nucleate Pool Boiling on A Plain Surface. Hittite Journal of Science and Engineering, Cilt: 6 - Sayı: 4, 309–313. https://ajindex.com/articles/538009
Zhang L, Shoji M. Nucleation site interaction in pool boiling on the artificial surface. International Journal of Heat and Mass Transfer 46 (2003) 513-522
Qi Y, Klausner JF. Heterogeneous nucleation with artificial cavities. Journal of Heat Transfer 127 (2005) 1189-1196
Mchale JP, Garimella SV. Bubble nucleation characteristics in pool boiling of a wetting liquid on smooth and rough surfaces. International Journal of Multiphase Flow 36 (2010) 249-260
Moita AS, Teodori E, Moreira ALN. Influence of surface topography in the boiling mechanisms. International Journal of Heat and Fluid Flow 52 (2015) 50-63
Bourlioux A. A coupled level-set volume-of-fluid algorithm for tracking material interfaces. Paper presented at 6th International Symposium on Computational Fluid Dynamics. Lake Tahoe, NV, pp. 15-22, 1995
Sussman M, Puckett EG. A Coupled Level Set and Volume-of-Fluid Method for Computing 3D and Axisymmetric Incompressible TwoPhase Flows. Journal of Computational Physics 162 (2000) 301-337
Wang Z, Yang J, Koo B, Stern F. A coupled level set and volume-offluid method for sharp interface simulation of plunging breaking waves. International Journal of Multiphase Flow 35 (2009) 227-246
Son G, Hur N. A coupled level set and volume-of-fluid method for the buoyancy-driven motion of fluid particles. Numerical Heat Transfer, Part B: Fundamentals 42 (2002) 523-542
Arienti M, Sussman M. An embedded level set method for sharpinterface multiphase simulations of Diesel injectors. International Journal of Multiphase Flow 59 (2014) 1-14
Lamas MI, Sáiz Jabardo JM, Arce A, Fariñas P. Numerical analysis of the bubble detachment diameter in nucleate boiling. Journal of Physics: Conference Series, 395 (2012)
Zahedi P, Saleh R, Moreno-Atanasio R, Yousefi K. Influence of fluid properties on bubble formation, detachment, rising and collapse; Investigation using volume of fluid method. Korean Journal of Chemical Engineering 31 (2014) 1349-1361
Stojanović A, Stevanović V, Petrović M, Živković D, Stanković B. Numerical study of heat transfer during nucleate pool boiling. Advanced Technologies 5 (2016) 73-80
Rohsenow WM. A Method of correlating heat transfer data for surface boiling of liquids. Technical Report (1951)
Fritz W. Berechnung des maximalvolume von dampfblasen. Physikalische Zeitschrift. 36 (1935) 379-388
Cole R. Bubble frequencies and departure volumes at subatmospheric pressures. AIChE Journal 13 (1967) 779-783