KaydedilenlerDerginizi ekleyin

Dergiler / Hittite Journal of Science and Engineering / 2022 / Cilt: 9 - Sayı: 1

Optimal Design of an In-flight Refueling Door Mechanism

Ali Emre Turgut
Hakan Çalışkan
Hasan Akman
Sayfa
27–36
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It was shown that through optimization, the required input torque decreased approximately 20% for the door opening mechanism and the required input force decreased approximately 42% for the actuation mechanism when compared to the graphical synthesis results.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the preliminary design of an in-flight refueling door mechanism is performed.
📊
Temel Bulgular & Veri:A systematic design methodology is introduced and used in the design of the refueling door mechanism.
💡
Sonuç & Katkı:It was shown that through optimization, the required input torque decreased approximately 20% for the door opening mechanism and the required input force decreased approximately 42% for the actuation mechanism when compared to the graphical synthesis results.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Optimal design · door mechanism · genetic algorithm

Abstract

In this study, the preliminary design of an in-flight refueling door mechanism is performed. A systematic design methodology is introduced and used in the design of the refueling door mechanism. The design is divided into two sub-functions: door opening and actuation. Nine different mechanism concepts are created for the door opening function and eight different concepts are created for the actuation function. Pugh decision matrix method is used to evaluate and select the most feasible options. Six experienced engineers scored the option set, resultantly two concepts for the door opening and three concepts for the actuation sub-function are selected. Kinematic synthesis of these concepts is performed and used to determine the upper and lower bounds during optimization. Kinematic and force analysis of the concepts are performed and utilized for the constraints and cost function calculations of the optimization algorithm. Multi-objective Genetic Algorithm optimization technique is used to optimize the parameters of the selected mechanisms. The best mechanism for each sub-function is selected and combined to reach the final design. It was shown that through optimization, the required input torque decreased approximately 20% for the door opening mechanism and the required input force decreased approximately 42% for the actuation mechanism when compared to the graphical synthesis results.

🔖

Bu Makaleye Atıf Yap

Turgut, A. E., Çalışkan, H., Akman, H. (2022). Optimal Design of an In-flight Refueling Door Mechanism. Hittite Journal of Science and Engineering, Cilt: 9 - Sayı: 1, 27–36. https://ajindex.com/articles/537884

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Aerial refueling. (2003, May 31). Wikipedia.
  2. W. Alyafie, “Automatic Door System of Bus Door,” 2012. [Online]. Available:
  3. B. Baykus, E. Anli, and I. Ozkol, “Design and Kinematics Analysis of a Parallel Mechanism to be Utilized as a Luggage Door by an Analogy to a Four-Bar Mechanism,” vol. 2011, no. April, pp. 411–421, 2011
  4. N. D. Thang, “Mechanism.” [Online]. Available:
  5. J. Soss, “Hinge,” US1484093A, 1924. Available:
  6. J. A. M. Eng, A. Toropov, and R. Ad, “Kinematics of Invisible Hinge,” J. Appl. Mech. Eng., vol. 6, no. 4, pp. 4–11, 2017
  7. C. Lanni and M. Ceccarelli, “An Optimization Problem Algorithm for Kinematic Design of Mechanisms for Two-Finger Grippers,” Open Mech. Eng. J., vol. 3, no. 1, pp. 49–62, 2009
  8. A. J. G. Nuttall and A. J. Klein Breteler, “Compliance Effects in a Parallel Jaw Gripper,” Mech. Mach. Theory, vol. 38, no. 12, pp. 1509–1522, 2003
  9. G. N. Sandor and A. G. Erdman, “Advanced Mechanism Design”, Volume 2., Prentice-Hall International, Inc., London, 1984, pp. 76–90
  10. L. G. Reifschneider, “Teaching Kinematic Synthesis of Linkages without Complex Mathematics,” J. Ind. Technol., vol. 21, no. 4, pp. 17–32, 2005
  11. Akman H. (2019). A functional design methodology with genetic algorithm optimization to a door actuation mechanism. MS. Thesis, Middle East Technical University
  12. Dai, Xunhua, et al. "Hose-drum-unit Modeling and Control for Probe-and-drogue Autonomous Aerial Refueling." IEEE Transactions on Aerospace and Electronic Systems (2019)
  13. Yin, Haipeng, et al. "Pilot-Induced Oscillation Analysis for Receiver in Flying-Boom Aerial Refueling via Mission-Oriented Evaluation." 2019 IEEE 10th International Conference on Mechanical and Aerospace Engineering (ICMAE). IEEE, 2019
  14. Wang, Qiansheng, et al. "Configuration Synthesis of Side Door Latch Power Release Mechanism." 2019 3rd International Conference on Electronic Information Technology and Computer Engineering (EITCE). IEEE, 2019
  15. Pedrammehr, Siamak, Mohammad Reza Chalak Qazani, and Saeid Nahavandi. "A novel axis symmetric parallel mechanism with coaxial actuated arms." 2018 4th International Conference on Control, Automation and Robotics (ICCAR). IEEE, 2018
  16. Freudenstein, F., and Maki, E. R. "The creation of mechanisms according to kine