Dergiler / Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji / 2021 / Cilt: 9 - Sayı: 2

Investigation of the Effect of Using Fe + Pure Water Nanofluid on Thermal Performance in a Two Phase Closed Thermosyphon

Sayfa
357–372
Yayın Tarihi
2022-10-18
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The use of nanofluid has also reduced the thermal resistance of the thermosyphon.The highest rate of decrease in thermal resistances was obtained as 56.7% in the experimentperformed at 150 W heating power and 3 g/s coolant flow rate

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Heat is a type of energy that is used in many applications and can be easily converted into othertypes of energy.
📊
Temel Bulgular & Veri:In this study, a performance analysis was carried out by using Fe + Pure waternanofluid in place of pure water in a two phase closed thermosyphon, which has a wide place inpractice due to its simple structure.
💡
Sonuç & Katkı:The use of nanofluid has also reduced the thermal resistance of the thermosyphon.The highest rate of decrease in thermal resistances was obtained as 56.7% in the experimentperformed at 150 W heating power and 3 g/s coolant flow rate
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

Heat is a type of energy that is used in many applications and can be easily converted into othertypes of energy. In this study, a performance analysis was carried out by using Fe + Pure waternanofluid in place of pure water in a two phase closed thermosyphon, which has a wide place inpractice due to its simple structure. In the study, a copper thermosyphon with a length of 1 m,diameter of 14 mm and wall thickness of 1 mm was used. Experiments were performed withboth pure water and nanofluid to make a comparison. To observe the performance of system indifferent operating conditions, the experiments were carried out at 3 different heating power(150, 300, 450 W) and 3 different coolant flow rates (3, 6, 9 g/s). In all experimental conditions,Fe + Pure water nanofluid had better results than pure water. The highest efficiency value wasfound to be 77.9% in the experiment using Fe + Pure water nanofluid, performed at 150 Wpower and 9 g/s water flow rate. When pure water was used in this experiment, the efficiencyvalue was obtained as 67.7% and the improvement rate was 15%. The highest improvement ratewas obtained as 50.3% in the experiment conducted at 450 W heating power and 3 g/s coolantflow rate. The use of nanofluid has also reduced the thermal resistance of the thermosyphon.The highest rate of decrease in thermal resistances was obtained as 56.7% in the experimentperformed at 150 W heating power and 3 g/s coolant flow rate

🔖

Bu Makaleye Atıf Yap

MARTİN, K. (2022). Investigation of the Effect of Using Fe + Pure Water Nanofluid on Thermal Performance in a Two Phase Closed Thermosyphon. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, Cilt: 9 - Sayı: 2, 357–372. https://ajindex.com/articles/521886

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Olabi, A.G., Elsaid, K., Sayed, E. T., Mahmoud, M. S., Wilberforce, T., Hassiba, R. J., & Abdelkareem, M. A. (2020). Application of Nanofluids for Enhanced Waste Heat Recovery: A Review. Nano Energy, 105871.
  2. Forman, C., Muritala, I. K., Pardemann, R., & Meyer, B. (2016). Estimating the global waste heat potential. Renewable and Sustainable Energy Reviews, 57, 1568–1579.
  3. Europan Comission. (2021). 2030 climate & energy framework. Retrieved February 20, 2021, from
  4. Ozsoy, A., & Corumlu, V. (2018). Thermal performance of a thermosyphon heat pipe evacuated tube solar collector using silver-water nanofluid for commercial applications. Renewable Energy, 122, 26– 34.
  5. Kaya, M., Gürel, A. E., Ağbulut, Ü., Ceylan, İ., Çelik, S., Ergün, A., & Acar, B. (2019). Performance analysis of using CuO-Methanol nanofluid in a hybrid system with concentrated air collector and vacuum tube heat pipe. Energy Conversion and Management, 199(August).
  6. Çiftçi, E. (2020). AlN/Saf Su Nanoakışkanının Isı Borusu Performans Parametreleri Üzerindeki Etkilerinin Deneysel Olarak Araştırılması. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 8(4), 858–871.
  7. Wang, W. W., Cai, Y., Wang, L., Liu, C. W., Zhao, F. Y., Sheremet, M. A., & Liu, D. (2020). A twophase closed thermosyphon operated with nanofluids for solar energy collectors: Thermodynamic modeling and entropy generation analysis. Solar Energy, 211(May), 192–209.
  8. Khajehpour, E., Noghrehabadi, A. R., Nasab, A. E., & Nabavi, S. M. H. (2020). Experimental investigation of the effect of nanofluids on the thermal resistance of a thermosyphon L-shape heat pipe at different angles. International Communications in Heat and Mass Transfer, 113(March), 104549.
  9. Gallego, A., Herrera, B., Buitrago-Sierra, R., Zapata, C., & Cacua, K. (2020). Influence of filling ratio on the thermal performance and efficiency of a thermosyphon operating with Al2O3-water based nanofluids. Nano-Structures and Nano-Objects, 22, 100448.
  10. Vidhya, R., Balakrishnan, T., & Suresh Kumar, B. (2020). In