KaydedilenlerDerginizi ekleyin

Dergiler / Gazi University Journal of Science / 2019 / Cilt: 32 - Sayı: 1

Decolourisation of Disperse Brown Dye Solution by Electrocoagulation Process with Al and Fe Electrodes

Yasemin ÇALIŞKAN
Mesut ÖZDEN
Mesut TEKBAŞ
Nihal BEKTAŞ
Sayfa
104–114
Yayın Tarihi
2022-10-19
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Dye removal rate was achieved as %80 with real wastewater with energyconsumption of 9.16 kWh/m3.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Dyes used in the textile industry can easily contaminate water and are becoming a world-widepollution problem.
📊
Temel Bulgular & Veri:ECoptimum working conditions for decolourisation rate of 50 mg/L synthetic dye solution werefound as current density of 30-37.5 mA/cm2, conductivity value of 1 mS/cm, pH value of 7.5 at25oC for both Al and Fe electrodes in this experimental work.
💡
Sonuç & Katkı:Dye removal rate was achieved as %80 with real wastewater with energyconsumption of 9.16 kWh/m3.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

Dyes used in the textile industry can easily contaminate water and are becoming a world-widepollution problem. The efficiency of colour removal process from artificially prepared and actualtextile wastewater using electrocoagulation (EC) was investigated in this study. A disperse dyewas selected for the synthetic dye wastewater experiments. Different operating conditions suchas dye concentration, pH, conductivity values and current density (CD) were investigated usingsynthetically prepared dye solution in a batch EC reactor with parallel-connected electrodes. ECoptimum working conditions for decolourisation rate of 50 mg/L synthetic dye solution werefound as current density of 30-37.5 mA/cm2, conductivity value of 1 mS/cm, pH value of 7.5 at25oC for both Al and Fe electrodes in this experimental work. Additionally, a real textilewastewater was tested at similar experimental conditions achieved with synthetic dye solutionusing a batch EC reactor. Dye removal rate was achieved as %80 with real wastewater with energyconsumption of 9.16 kWh/m3.

🔖

Bu Makaleye Atıf Yap

ÇALIŞKAN, Y., ÖZDEN, M., TEKBAŞ, M., BEKTAŞ, N. (2022). Decolourisation of Disperse Brown Dye Solution by Electrocoagulation Process with Al and Fe Electrodes. Gazi University Journal of Science, Cilt: 32 - Sayı: 1, 104–114. https://ajindex.com/articles/521379

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Joshi, M., Bansal, R., Purwar, R., “Colour removal from textile effluents”, Indian Journal of Fibre & Textile Research, 29: 239-259, (2003).
  2. Patel, H., Vashi, R.T., Characterization and Treatment of Textile Wastewater 1st ed., Elsevier, (2015).
  3. Asghar, A., Raman, A.A.A., Daud, W.M.A.W., “Review advanced oxidation processes for in-situ production of hydrogen peroxide/hydroxyl radical for textile wastewater treatment: a review”, Journal of Cleaner Production, 87: 826-838, (2015).
  4. Holkar, C.R., Jadhav, A.J., Pinjari, D.V., Mahamuni, N.M., Pandit, A.B., “A critical review on textile wastewater treatments: Possible approaches”, Journal of Environmental Management, 182: 351-366, (2016).
  5. Jegatheesan, V., Pramanik, B.K., Che, N.J., Navaratna, D., Chang, C.Y., Shu, L., “Treatment of textile wastewater with membrane bioreactor: A critical review”, Bioresource Technology, 204: 202-212, (2016).
  6. Diya'uddeenab, B.H., Pouran, S.R., Abdul Aziz, A.R., Dau, W.M.A.W., “Fenton oxidative treatment of petroleum refinery wastewater: process optimization and sludge characterization”, RSC Advances, 5: 68159-68168, (2015).
  7. Chen, G., “Electrochemical technologies in wastewater treatment”, Separation and Purification Technology, 38: 11-41, (2004).
  8. Mollah, M.Y.A., Morkovsky, P., Gomes, J.A.G., Kesmez, M., Parga, J., Cocke, D.L., “Fundamentals, present and future perspectives of electrocoagulation”, Journal of Hazardous Material, 114: 199-210, (2004).
  9. Brillas, E., Martínez-Huitle, C.A., “Decontamination of wastewaters containing synthetic organic dyes by electrochemical methods. An updated review”, Applied Catalysis B-Environment, 166 (167): 603- 643, (2015).
  10. An, C., Huang, G., Yao, Y., Zhao, S., “Emerging usage of electrocoagulation technology for oil removal from wastewater: A review”, Science of Total Environment, 579: 537-556, (2017).
  11. Hakizimana, J.N., Gourich, B., Chafi, M., Stiriba, Y., Vial, C., Drogui, P. Naja, J., “Electrocoagulation process in water treatment: A review of electrocoagulation modeling approaches”, Desalination, 404: 1-21, (2017).
  12. Moussa, D.T., El-Naas, M.H., Nasser, M., Al-Marri, M.J., “A comprehensive review of electrocoagulation for water treatment: Potentials and challenges”, Journal of Environmental Management, 186 (1): 24-41, (2017).
  13. Scott, K., Electrochemical processes of clean technology, The Royal Society of Chemistry, Cambridge, (1995).
  14. Mollah, M.Y.A., Schennach, R., Parga, J.P., Cocke, D.L., “Electrocoagulation (EC)-Science and applications”, Journal