Dergiler / European Mechanical Science / 2021 / Cilt: 5 - Sayı: 2

A Numerical Investigation of The Fracture Energy of Materials for Fuel Cell End Plates

Sayfa
56–63
Yayın Tarihi
2022-10-12
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Another goal was to select a sutitable material was selected as PEMFC end plate.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Nowadays, with increasing energy requirements, the use of clean energy resources has become important.
📊
Temel Bulgular & Veri:Additionally, they have many significant properties such as not producing harmful gases, therefore they do not cause environmental and chemical pollution.
💡
Sonuç & Katkı:Another goal was to select a sutitable material was selected as PEMFC end plate.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:PEMFC · End plate · Fracture energy

Abstract

Nowadays, with increasing energy requirements, the use of clean energy resources has become important. Fuel cells are an important key for clean energy technology due to wide range of utilization areas such as automotive, portable power applications, electricity generation, space, aviation and naval technologies. Additionally, they have many significant properties such as not producing harmful gases, therefore they do not cause environmental and chemical pollution. Besides, they have not any moving parts, also they do not produce noise. By comparison to fossil fuel, fuel cells have high efficiency that reaches up to 60% in appropriate conditions. Proton Exchange Membrane Fuel Cell (PEMFC) has many advantages than other fuel cell types due to simple structure, higher efficiency and low operating temperature. PEMFC may consist of one or more stacks to generate more electricity. End plate of PEMFC holds together all parts of it. Therefore, the material selection for end plate is important to provide safe conditions. To use PEMFC safely, investigation of material fracture energy is required to decide that the material is in safe conditions or not. There are three fracture energy modes which are mode I, mode II and mode III. There are many methods to investigate failure of material at different modes. Unlike other methods, Arcan specimen gives facility to evaluate of mode I, mode II and mixed modes. The main purpose of this paper was to compare the results of fracture energy (stain energy release rate) of different materials for end plates in fuel cells. Another goal was to select a sutitable material was selected as PEMFC end plate.

🔖

Bu Makaleye Atıf Yap

Avcu, A., Choupan, N., Tüccar, G. (2022). A Numerical Investigation of The Fracture Energy of Materials for Fuel Cell End Plates. European Mechanical Science, Cilt: 5 - Sayı: 2, 56–63. https://ajindex.com/articles/512404

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (3)

  1. Ural, Z., Gencoglu, M.T., (2010). Mathematical Models of PEM Fuel Cells. 5th International Ege Energy Symposium and Exhibition (IEESE-5). (June): 27–30.
  2. Giorgi, L., & Leccese, F. (2013). Fuel cells: Technologies and applications. The Open Fuel Cells Journal, 6(1): 1-20. doi: 10.2174/1875932720130719001. Scott, K., Shukla, A.K., (2004). Polymer electrolyte membrane fuel cells: Principles and advances. Reviews in Environmental Science and Biotechnology. 3(3): 273–80. doi: 10.1007/s11157-004-6884-z. Vishnyakov, V.M., (2006). Proton exchange membrane fuel cells. Vacuum. 80(10): 1053–65. doi: 10.1016/j.vacuum.2006.03.029. Habibi, A., Mousavi, N., Mohammadi, M., Farahmand, S. (2019). The Performance of Types of Fuel Cell: Energy Generation. International Journal of Engineering Science and Application, 3(3), 142-150.
  3. Dhand, A., (2017). Advances in Materials for Fuel Cell Technologies- A Review. International Journal for Research in Applied Science and Engineering Technology. V(IX): 1672–82. doi: 10.22214/ijraset.2017.9243. Perry, M.L., Fuller, T.F., (2002). A Historical Perspective of Fuel Cell Technology in the 20th Century. Journal of The Electrochemical Society. 149(7): 59-67. doi: 10.1149/1.1488651. Baroutaji, A., Carton, J.G., Sajjia, M., Olabi, A.G., (2016). Materials in PEM Fuel Cells. Elsevier Ltd. Tamilarasan, U., Karunamoorthy, L., Palanikumar, K., (2015). Mechanical properties evaluation of the carbon fibre reinforced aluminium sandwich composites. Materials Research. 18(5): 1029–37. doi: 10.1590/1516-1439.017215. Yu, H.N., Kim, S.S., Suh, J. Do., Lee, D.G., (2010). Composite endplates with pre-curvature for PEMFC (polymer electrolyte membrane fuel cell). Composite Structures. 92(6): 1498–503. doi: 10.1016/j.compstruct.2009.10.023. Hermann, A., Chaudhuri, T., Spagnol, P., (2005). Bipolar plates for PEM fuel cells: A review. International Journal of Hydrogen Energy. 30(12): 1297–302. doi: 10.1016/j.ijhydene.2005.04.016. Wilberforce, T., El Hassan, Z., Ogungbemi, E., Ijaodola, O., Khatib, F.N., Durrant, A., et al., (2019). A comprehensive study of the effect of bipolar plate (BP) geometry design on the performance of proton exchange membrane (PEM) fuel cells. Renewable and Sustainable Energy Reviews. 111(April): 236–60. doi: 10.1016/j.rser.2019.04.081. Heydari, M. H., Choupani, N., & Shameli, M. (2011). Experimental and numerical investigation of mixed-mode interlaminar fracture of carbon-polyester laminated woven composite by using arcan set-up. Applied