Dergiler / European Mechanical Science / 2022 / Cilt: 6 - Sayı: 3

Validation of A356T6 automobile wheel fatigue strength using the finite elements method

Sayfa
207–212
Yayın Tarihi
2022-10-12
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

According to the results, it has been revealed that the experimental and analysis data are parallel to each other.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, A356T6 wheel bending fatigue test limits determined using the finite element methods and compared to experimental test results.
📊
Temel Bulgular & Veri:Short and long cycle bending fatigue tests (200.000 and 1.800.000 respectively) were performed.
💡
Sonuç & Katkı:According to the results, it has been revealed that the experimental and analysis data are parallel to each other.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Bending fatigue · A356T6 · Finite Element Methods

Abstract

In this study, A356T6 wheel bending fatigue test limits determined using the finite element methods and compared to experimental test results. In experimental test, zinc-glycerin was applied front surfaces of wheels to obtain fatigue detects. Short and long cycle bending fatigue tests (200.000 and 1.800.000 respectively) were performed. Simulation model was created in Ansys by defining A356 S-N curve. Simulation performed has been with test parameters. According to simulation results, the crack starts 225.000 cycle in short-test and 2.000.000 cycle in long -test. According to the results, it has been revealed that the experimental and analysis data are parallel to each other.

🔖

Bu Makaleye Atıf Yap

CEYLAN, O., AYDOĞAN, F. (2022). Validation of A356T6 automobile wheel fatigue strength using the finite elements method. European Mechanical Science, Cilt: 6 - Sayı: 3, 207–212. https://ajindex.com/articles/512380

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (6)

  1. Tebaldini, M., Petrogalli, C., Donzella, G., Gelfi, M., La Vecchia, G.M., (2018). A356-T6 wheels: Influence of casting defects on fatigue design. Fatigue and Fracture of Engineering Materials and Structures. 41(8): 1784–93. doi: 10.1111/ffe.12820
  2. TS EN ISO 6506-2., (2019). Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
  3. ISO., (2019). Metallic Materials - Tensile testing -Part 1: Method of test at room temperature (ISO 6892-1:2019).” 2019
  4. ASTM., (2002). Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials. Test.: 4–8
  5. TS ISO 3006., (2015). Road vehicles - Passenger car wheels for road use - Test methods (112): 18
  6. UNITED NATIONS., (2007). UNIFORM PROVISIONS CONCERNING THE APPROVAL OF WHEELS FOR PASSENGER CARS AND THEIR TRAILERS.