Journals / European Mechanical Science / 2022 / Cilt: 6 - Sayı: 3

Validation of A356T6 automobile wheel fatigue strength using the finite elements method

Pages
207–212
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to the results, it has been revealed that the experimental and analysis data are parallel to each other.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, A356T6 wheel bending fatigue test limits determined using the finite element methods and compared to experimental test results.
📊
Key Findings & Data:Short and long cycle bending fatigue tests (200.000 and 1.800.000 respectively) were performed.
💡
Conclusion & Impact:According to the results, it has been revealed that the experimental and analysis data are parallel to each other.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Bending fatigue · A356T6 · Finite Element Methods

Abstract

In this study, A356T6 wheel bending fatigue test limits determined using the finite element methods and compared to experimental test results. In experimental test, zinc-glycerin was applied front surfaces of wheels to obtain fatigue detects. Short and long cycle bending fatigue tests (200.000 and 1.800.000 respectively) were performed. Simulation model was created in Ansys by defining A356 S-N curve. Simulation performed has been with test parameters. According to simulation results, the crack starts 225.000 cycle in short-test and 2.000.000 cycle in long -test. According to the results, it has been revealed that the experimental and analysis data are parallel to each other.

🔖

Cite This Article

CEYLAN, O., AYDOĞAN, F. (2022). Validation of A356T6 automobile wheel fatigue strength using the finite elements method. European Mechanical Science, Cilt: 6 - Sayı: 3, 207–212. https://ajindex.com/articles/512380

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (6)

  1. Tebaldini, M., Petrogalli, C., Donzella, G., Gelfi, M., La Vecchia, G.M., (2018). A356-T6 wheels: Influence of casting defects on fatigue design. Fatigue and Fracture of Engineering Materials and Structures. 41(8): 1784–93. doi: 10.1111/ffe.12820
  2. TS EN ISO 6506-2., (2019). Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines
  3. ISO., (2019). Metallic Materials - Tensile testing -Part 1: Method of test at room temperature (ISO 6892-1:2019).” 2019
  4. ASTM., (2002). Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials. Test.: 4–8
  5. TS ISO 3006., (2015). Road vehicles - Passenger car wheels for road use - Test methods (112): 18
  6. UNITED NATIONS., (2007). UNIFORM PROVISIONS CONCERNING THE APPROVAL OF WHEELS FOR PASSENGER CARS AND THEIR TRAILERS.