Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightThe least drill bit wear value was also observed in TiNcoated drill bits.
📌 3 Maddede Bu Makale
Abstract
Drilling operations have an important role in manufacturing industries and the application range is about33% among the machining methods. In drilling processes, hole quality is affected by workpiece material,drilling parameters, drill diameter, drill bit features. In this study, the surface quality of the hole and the drill bit wear were investigated experimentally whendrilling AISI 1040 steel and Al7075 aluminum workpieces with twist drills. Three different types of twistdrill bits (polished, rolled and TiN coated) with diameters of 8 mm and 10 mm were used for drilling. Hole surface roughness was investigated at the hole entry and hole exit. While revealing the surfacequality change at the hole entry-exit, the effect of the drill feature difference on the surface quality hasbeen tried to be determined. In general, hole surface quality decreased with increasing drill bit diameterwhen drilling both materials. The lowest surface roughness values were obtained in the use of TiNcoated drill bits. Drill bit wear was also measured in the study, and it was seen that the drill bit wearincreased with increasing drill bit diameter. The least drill bit wear value was also observed in TiNcoated drill bits.