Dergiler / Journal of International Environmental Application and Science / 2019 /

Utilization of biomass (Rice straw) to produce activated charcoal through single stage pyrolysis process.

Sayfa
1–6
Yayın Tarihi
2019-03-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Iodine number and methylene blue.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The average cost generation of activated carbon from biomaterials is relatively low as compare to the cost of industrial prepared activated carbon, recent experimental work mainly focuses on the low cost and efficient substitutes to the pre-existing commercial methods and finding economical process that can subsidize the sustainability to environment and provide benefits for further commercial use.
📊
Temel Bulgular & Veri:In this research Raw material (Rice Straw) was used to produce activated carbon, process was initially started with washing of raw material to eliminate dirt impurities with distilled water and de-moisturized it in an oven for 24 hours at 105 0C.
💡
Sonuç & Katkı:Iodine number and methylene blue.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Rice Straw (RS) · activated carbon (AC) · activating agent

Abstract

The average cost generation of activated carbon from biomaterials is relatively low as compare to the cost of industrial prepared activated carbon, recent experimental work mainly focuses on the low cost and efficient substitutes to the pre-existing commercial methods and finding economical process that can subsidize the sustainability to environment and provide benefits for further commercial use. In this research Raw material (Rice Straw) was used to produce activated carbon, process was initially started with washing of raw material to eliminate dirt impurities with distilled water and de-moisturized it in an oven for 24 hours at 105 0C. Then dried mass (DM) was impregnated with the activating agent MgCl2 with 1:1 and kept for 2 hours at room temperature and dried for 48 hours in an oven for activation. The treated material was carbonized by pyrolysis process in muffle furnace for 2 hours at 550 0C and the final product was kept in desiccator for further use. Freshly produced activated carbon Surface morphology was characterized by X-Ray diffraction (XRD), scanning of electron microscopy (SEM) & surface functional groups were analyzed by furrier Transform Infrared Spectroscopy (FTIR). Iodine number and methylene blue.

🔖

Bu Makaleye Atıf Yap

PANHWAR, İ., BABAR, A. A., QURESHİ, S., MEMON, S. A., ARAİN, M. (2019). Utilization of biomass (Rice straw) to produce activated charcoal through single stage pyrolysis process.. Journal of International Environmental Application and Science, 1–6. https://ajindex.com/articles/46726

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Yang HS, Kim D-J, Kim. H-J (2003).Rice straw–wood particle composite for sound absorbing wooden construction materials, Bio resources Techno, 86, pp.117-21. M. Radhika, and K. Palanivelu (2006), Adsorptive removal of chlorophenols from aqueous solution by low cost adsorbent Kinetics and isotherm analysis. J. Hazard. Mater, 138, pp.116–124.
  2. Y. Onal, C. Akmil-Bas¸ar, C, Sarıcı-Ozdemir, and S. Erdogan (2007). Textural development of sugar beet bagasse activated with ZnCl2. J. Hazard. Mater, 142, pp.138–143.
  3. B.H. Hameed, A.T.M. Din, and A.L. Ahmad (2007).Adsorption of methylene blue onto bamboo-based activated carbon: Kinetics and equilibrium studies. J. Hazard. Mater, 141, pp.819–825.
  4. B.H. Hameed, A.L. Ahmad, and K.N.A. Latiff (2007). Adsorption of basic dye (methylene blue) onto activated carbon prepared from rattan sawdust. Dyes Pigments, 75, pp.143–149.
  5. K. Legrouri, E. Khouya, M. Ezzine, H. Hannache, R. Denoyel, R. Pallier, and R. Naslain (2005). Production of activated carbon from a new precursor molasses by activation with sulphuric acid. J. Hazard. Mater. 118, pp.259–263.
  6. B.G. Prakash Kumar, K. Shivakamy, Lima Rose Miranda, and M. Velan (2006). Preparation of steam activated carbon from rubberwood sawdust (Hevea brasiliensis) and its adsorption kinetics. J. Hazard. Mater, 136, pp. 922– 929. I.A.W. Tan, B.H. Hameed, and A.L. Ahmad (2007). Equilibrium and kinetic studies on basic dye adsorption by oil palm fiber activated carbon. Chem. Eng. J, 127, pp.111–119.
  7. C.A. Basar (2006). Applicability of the various adsorption models of three dyes adsorption onto activated carbon prepared waste apricot. J. Hazard. Mater, 135, pp.232–241.
  8. I.A.W. Tan, B.H. Hameed, and A.L. Ahmad (2008), Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology. Chem. Eng. J, 137, pp.462–470.
  9. Elisabeth Schröder, Klaus Thomauske, Benjamin Oechsler, Sabrina Herberger, Sabine Baur and Andreas Hornung (2001) Activated Carbon from Waste Biomass, 19, pp.444. C. P. Huang and D.W Blankenship (1984). Water Research journal, 18, pp.37. R.C Bansal, D. Baptiste and S. Fritz (1988). Active Carbon Marcel. Dekker Inc. New York, 18 Pp.266 – 269. Putun AE, Ozbay N, Onal EP, Putun E (2005) Fixed-bed pyrolysis of cotton stalk for liquid and solid products. Fuel Process Techno, 86, pp.1207–19.
  10. Baral, D.J. and Jha, V.K. (2012) Preparation of activated charcoal adsorbent from waste tire. Scientific World, 10, pp.8083. Yang, K.; Peng, J.; Srinivasaka