KaydedilenlerDerginizi ekleyin

Dergiler / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2016 / Cilt: 17 - Sayı: 3

EFFECTS OF WELDING PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION WELDED AZ91 MG ALLOY

İbrahim ÇELİKYÜREK
Emre ÖNAL
Sayfa
563–571
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The results showed that the welding interfaces have higher hardness than the matrix and the shear strengths of welding interfaces increased with increasing pressure and speed while time has different effect

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The AZ91T5 Mg alloy was bonded by applying continuous drive friction welding machine.
📊
Temel Bulgular & Veri:The friction load, time and speed were used as friction welding parameters, and the effects of these parameters on the microstructure and mechanical properties of the welding interface were investigated.
💡
Sonuç & Katkı:The results showed that the welding interfaces have higher hardness than the matrix and the shear strengths of welding interfaces increased with increasing pressure and speed while time has different effect
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

The AZ91T5 Mg alloy was bonded by applying continuous drive friction welding machine. The friction load, time and speed were used as friction welding parameters, and the effects of these parameters on the microstructure and mechanical properties of the welding interface were investigated. Characterization of welding interface microstructure and fractured surfaces of joints was carried out by optical microscopy and scanning electron microscopy. Microstructural investigations revealed that the welding interfaces have a smooth and continues morphology. The micro hardness and shear strength of matrix and the welding interfaces were measured in order to determine the mechanical properties of the joints. The results showed that the welding interfaces have higher hardness than the matrix and the shear strengths of welding interfaces increased with increasing pressure and speed while time has different effect

🔖

Bu Makaleye Atıf Yap

ÇELİKYÜREK, İ., ÖNAL, E. (2022). EFFECTS OF WELDING PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION WELDED AZ91 MG ALLOY. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 17 - Sayı: 3, 563–571. https://ajindex.com/articles/438343

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Chai F, Zhang D, Zhang W, Li Y. Microstructure evolution during high strain rate tensile deformation of a fine-grained AZ91 magnesium alloy,Mater. Sci. and Eng. A., 2014; 590:80-87.
  2. Sunil B, Reddy G, Mounika ASN, Sree P, Pinneswari P, Ambica I, Babu R, Amarnadh P. Joining of AZ31 and AZ91 Mg alloys by friction stir welding, J. of Mag. and Alloy., 2015; 3:330-334.
  3. Bannour S, Abderrazak K, Mhiri H, Palec G. Effects of temperature-dependent material properties and shielding gas on molten pool formation during continuous laser welding of AZ91 magnesium alloy, Opt. and Laser Tech., 2012; 44:2459-2468.
  4. Kouadri A, Barrallier L. Texture characterization of hexagonal metals: Magnesium AZ91 alloy, Mater. Sci. and Eng. A., 2006; 429:11-17.
  5. Yuan T, Chai X, Luo Z, Kou S. Predicting susceptibility of magnesium alloy to weld-edge cracking, Act. Materi., 2015; 90:242-251.
  6. Zhu T, Chen Z, Gao W. Microstructure formation in partially melted zone during gas tungsten arc welding of AZ91 Mg cast alloy, Mater. Charac., 2008; 59:1550-1558.
  7. Wen T, Liu S, Chen S, Liu L, Yang C. Influence of high frequency vibration on microstructure and mechanical properties of TIG welding joints of AZ31 magnesium alloy, Trans. Nonfer. Mater. Soc. China, 2015; 25:397-404.
  8. Braszczynska-Malik K, Mroz M. Gas-tungsten arc welding of AZ91 magnesium alloy, J. of Alloy. and Comp., 2011; 509:9951-9958.
  9. Torun O, Karabulut A, Baksan B, Çelikyürek İ. Diffusion bonding of AZ91 using a silver interlayer, Mater. and Desi., 2008; 29:2043-2046.
  10. Niknejad S, Liu L, Lee M, Esmaeili S, Zhou N. Resistance spot welding of AZ series magnesium alloys: Effects of aluminum content on microstructure and mechanical properties, Mater. Sci. and Eng. A., 2014; 618:323-334.
  11. Xiao L, Liu L, Chen DI, Esmaeili S, Zhou Y. Resistance spot weld fatigue behavior and dislocation substructures in two different heats of AZ31 magnesium alloy, Mater. Sci. and Eng. A., 2011; 529:81- 87. Hosseini VA, Aashuri H, Kokabi AH. Characterization of newly developed semisolid stir welding method for AZ91 magnesium alloy by using Mg-25%Zn interlayer Mater. Sci. and Eng. A., 2013; 565:165-171.
  12. Yin YH, Sun N, North TH, Hu SS. Microstructures and mechanical properties in dissimilar AZ91/AZ31 spot welds Mater Charac., 2010; 61:1018-1028. [14] Rao HM, Yuan W, Badarinarayan H. Effects of process parameters on mechanical properties of friction stir spot welded magnesium to aluminum alloys, Mater and Desi., 2015; 66:235-245.
  13. Çelikyürek İ, Torun O, Baksan B. Micr