KaydedilenlerDerginizi ekleyin

Dergiler / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2016 / Cilt: 17 - Sayı: 5

MECHANICAL, ELECTRICAL AND THERMAL PROPERTIES OF ?/? SiAlON-SiC COMPOSITES FABRICATED BY GAS PRESSURE SINTERING METHOD

Erhan AYAS
Sayfa
812–822
Yayın Tarihi
2022-10-11
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

SiAlON - 10 vol. % SiC composite exhibited the semiconductor characteristic and high thermal conductivity with the electrical resistivity of 102 ?.m and thermal diffusivity of ~11 mm2/s measured at room temperature.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:SiAlON-SiC composites were produced by coating SiAlON based spray dried granules with varying amounts of SiC (0-10 vol % SiC) following gas pressure sintering technique.
📊
Temel Bulgular & Veri:A two step sintering schedule between 1940-1990°C under 10 MPa N2 gas pressure was adopted in order to achieve high densification rate.
💡
Sonuç & Katkı:SiAlON - 10 vol. % SiC composite exhibited the semiconductor characteristic and high thermal conductivity with the electrical resistivity of 102 ?.m and thermal diffusivity of ~11 mm2/s measured at room temperature.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

?/? SiAlON-SiC composites were produced by coating SiAlON based spray dried granules with varying amounts of SiC (0-10 vol % SiC) following gas pressure sintering technique. A two step sintering schedule between 1940-1990°C under 10 MPa N2 gas pressure was adopted in order to achieve high densification rate. All the composites and the reference SiAlON material were densified up to 99 %. ?/? SiAlON - 10 vol. % SiC composite had the highest hardness value (Hv10: 16.33 GPa) due to the formation of ?-SiAlON phases promoted with the increasing SiC content. No significant changes in the fracture toughness values of composites were observed. 3D segregated network of SiC particles along granules to establish electrical and thermal conductivity in the composites was successfully achieved with incorporation of 10 vol. % SiC. ?/? SiAlON - 10 vol. % SiC composite exhibited the semiconductor characteristic and high thermal conductivity with the electrical resistivity of 102 ?.m and thermal diffusivity of ~11 mm2/s measured at room temperature.

🔖

Bu Makaleye Atıf Yap

AYAS, E. (2022). MECHANICAL, ELECTRICAL AND THERMAL PROPERTIES OF ?/? SiAlON-SiC COMPOSITES FABRICATED BY GAS PRESSURE SINTERING METHOD. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 17 - Sayı: 5, 812–822. https://ajindex.com/articles/438320

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (19)

  1. Riley F. Silicon nitride and related materials. J Am Ceram Soc 2000; 83: 245-265
  2. Ayas E, Kara A, Kara F. A novel approach for preparing electrically conductive ?/? SiAlON-TiN composites by spark plasma sintering. Journal of the Ceramic Society of Japan 2008; 116: 812-814
  3. Bellosi A, Guicciardi S, Tampieri A. J Eur Ceram Soc 1992; 9: 83-93
  4. Sawaguchi A, Toda K, Niihara K. J Am Ceram Soc 1991; 74: 1142-1144
  5. Jiang D, Vleugels J, Van der Biest O, Liu W, Verheyen R, Lauwers B. Mater Sci Forum 2005; 492-493: 27-32
  6. Jones AH, Trueman C, Dobedoe RS, Huddleston J, Lewis MH. British Ceramic Transactions 2001; 100: 49-54
  7. Sciti D, Guicciardi S, Bellosi A. J Ceram Process Res 2002; 3: 87-95
  8. Ayas E, Kara A, Kara F. ?/? SiAlON based composites incorporated with MoSi2 for electrical applications. In: Singh D, Zhu D, Zhou Y, editors. Design, Development and Applications of Engineering Ceramics and Composites. USA: Ceramic Transactions, 2010. pp. 189-195
  9. Yurdakul H. Microstructural investigation of ?-? SiAlON/SiC composites by analytical transmission electron microscopy. Journal of the Ceramic Society of Japan 2015; 123: 136-141
  10. Liu Q, Gao L, Yan DS, Mandal H, Thompson DP. J Eur Ceram Soc 1997; 17: 593-598
  11. Liu Q, Gao L, Yan DS, Mandal H, Thompson DP. J Eur Ceram Soc 1997; 17: 587-592
  12. Bouchet J, Carrot C, Guillet J, Boiteux G, Seytre G, Pineri M. Conductive composites of UHMWPE and ceramics based on the segregated network concept. Poly Eng Sci 2000; 40: 36-45
  13. Sandler JKW, Kirk JE, Kinloch IA, Shaffer MSP, Windle AH. Ultra-low electrical percolation threshold in carbon nanotube-epoxy composites. Polymer 2003; 44: 5893-5899
  14. Carmona F. Conducting filled polymers. Physica A 1989; 157: 461-469
  15. Kirkpatrick S. Percolation and conduction. Rev Mod Phys 1973; 45: 574-588
  16. McLachlan DS, Blaszkiewicz M, Newnham RE. Electrical resistivity of composites. J Am Ceram Soc 1990; 73: 2187-2203
  17. Kusy RP. Influence of particle size ratio on the continuity of aggregates. J Appl Phys 1977; 48: 5301-5305
  18. Matsuo Y. Development of gas pressure sintered silicon nitride ceramics. In: Koizumi M, editor. Hot Isostatic Pressing-Theory and Applications. Netherlands: Springer Netherlands, 1992. pp. 49-54
  19. Mandal H, Calis Acikbas N. SiAlON based functionally graded materials. In: Low IM, editor. Ceramic-Matrix Composites: Microstructure, Properties and Applications. Cambridge, England: Woodhead Publishing Limite