Cutting parameters are optimized by maximizing material removal rate and minimizing surface roughness and cutting force.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this article, surface roughness, cutting forces and material removal rates of different materials are investigated in different cutting conditions in turning operations.
📊
Temel Bulgular & Veri:Surface roughness, material removal rate and cutting forces were measured during experiments.
💡
Sonuç & Katkı:Cutting parameters are optimized by maximizing material removal rate and minimizing surface roughness and cutting force.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Abstract
In this article, surface roughness, cutting forces and material removal rates of different materials are investigated in different cutting conditions in turning operations. First, vibration characteristics (natural and chatter frequency, stiffness coefficient and damping ratio) are determined by modal analysis and different cutting tests. Surface roughness, material removal rate and cutting forces were measured during experiments. By using these experiments, five different hybrid multi-criteria decision making models are proposed. Cutting parameters are optimized by maximizing material removal rate and minimizing surface roughness and cutting force.
🔖
Bu Makaleye Atıf Yap
SOFUOĞLU, M. A., ORAK, S., ARAPOĞLU, R. A. (2022). MULTI OBJECTIVE OPTIMIZATION OF TURNING OPERATION USING HYBRID DECISION MAKING ANALYSIS. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 18 - Sayı: 3, 595–610. https://ajindex.com/articles/438288
Puertas I and Luis Perez CJ. Surface Roughness Prediction By Factorial Design of Experiments in Turning Processes, Journal of Materials Processing Technology, 2003;143 - 144: 390 - 396
Jha NK. A discrete data base multiple objective optimization of milling operation through geometric programming. Journal of Engineering for Industry, 1990;112: 368-374
Wang ZG, Rahman M, Wong and Sun J,Optimization of multi-pass milling using parallel genetic algorithm and parallel genetic simulated annealing. International Journal of Machine Tools and Manufacture, 2005; 45(15):1726-1734
Maeda O, Cao Y and Altıntaş Y. Expert spindle design system. International Journal of Machine Tools and Manufacture, 2005; 45(4-5):537-548
Ghani JA, Choudhury I.A and Hassan HH, Application of Taguchi method in the optimization of end milling parameters. Journal of Materials Processing Technology, 2004; 145(1):84-92
Vivancos J, Luis CJ, Costa L and Ortiz JA. Optimal machining parameters selection in high speed devir milling of hardened steels for injection moulds. Journal of Materials Processing Technology, 2004; 155-156:1505-1512
Budak E. An analytical design method for milling cutters with non-constant pitch to increase stability, Part 1: Theory and Part 2: Application. Journal of Manufacturing Science and Engineering, 2003;125: 29-38
Onwubolu G. Optimization of milling operations for the selection of cutting conditions using Tribes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2005;219(10):761-771
Stoic A, Kopac J and Cukor G. Testing of machinability of mould steel 40CrMnMo7 using genetic algorithm. Journal of Materials Processing Technology, 2005;164-165:1624-1630
Saikumar S and Shunmugan MS. Parameter selection based on surface finish in high speed finish in high speed end milling using differential evolution. Materials and Manufacturing Processes, 2008; 21(4):341-347
Tandon V, El-Mounayri H and Kishawy H. NC end milling optimization using evolutionary computation. International Journal of Machine Tools and Manufacture, 2002;42(5):595-605
Kurdi MH, Schmitz TL, Haftka RT and Mann BP. Simultane