The evaluation of the results pointed out that the hybrid joints where adhesive and rivet are used together can carrymuch more load than the joints where the only adhesive was used or the joints which are combined with a rivet in terms of jointstrength.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:The scope of this study is to determine the effectiveness of using rivets in the adhesive joints in order to combine plastic-basedcomposite materials which are often used in today's engineering structures, to the joint strength.
📊
Temel Bulgular & Veri:For this purpose, double lapjoints are prepared in 3 different types of configuration included adhesive, pinned and both adhesive and pinned and alsoprepared in 3 different overlap lengths as 30, 45 and 60 mm.
💡
Sonuç & Katkı:The evaluation of the results pointed out that the hybrid joints where adhesive and rivet are used together can carrymuch more load than the joints where the only adhesive was used or the joints which are combined with a rivet in terms of jointstrength.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Abstract
The scope of this study is to determine the effectiveness of using rivets in the adhesive joints in order to combine plastic-basedcomposite materials which are often used in today's engineering structures, to the joint strength. For this purpose, double lapjoints are prepared in 3 different types of configuration included adhesive, pinned and both adhesive and pinned and alsoprepared in 3 different overlap lengths as 30, 45 and 60 mm. Stress-strain diagrams were derived by exposing the jointsobtained, to the axial tensile test and then the most appropriate joint type was determined by comparing each of the resultsobtained. The evaluation of the results pointed out that the hybrid joints where adhesive and rivet are used together can carrymuch more load than the joints where the only adhesive was used or the joints which are combined with a rivet in terms of jointstrength.
🔖
Bu Makaleye Atıf Yap
KOCABAŞ, İ., GÜR, M., SOLMAZ, M. Y. (2022). EFFECT OF RIVETING ON THE JOINT STRENGTH OF ADHESIVELY BONDED DOUBLE LAP JOINTS. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 19 - Sayı: 1, 1–9. https://ajindex.com/articles/438237
İçten BM, Oktan B, Karakuzu R. Failure strength of woven glass fiber-epoxy Composites Pinned Joints. Journal of Composite Materials 37 (2003); 1337-1350.
Apalak ZG, Apalak MK. Progressive damage modeling of and adhesively bonded unidirectional composite single-lap joint in tension at the mesoscale level. J Thermoplast Compos Mater 2006; 19:671–702.
Song MG, Kweon JH, Choi JH., Byun JH, Song MH, Shin SJ, Lee TJ, Effect of manufacturing methods on the shear strength of composite single-lap bonded joints, Composite Structures 92 (2010) 2194–2202.
Shahin K., Taheri F., Deformations in adhesively bonded joints on elastic foundations, Composite Structures 90 (2009) 130–140.
Lai YH, Rakestraw MD, Dillard DA. Cracked lap shear specimen revisited – a closed form solution. Int J Solids Struct 1996; 33:1725–43.
Kafkalidis MS, Thouless MD. The effects of geometry and material properties on the fracture of single lap-shear joints. Int J Solids Struct 2002; 39:4367–83.
Suo Z, Hutchinson JW. Interface crack between two elastic layers. Int J Fract 1990;43:1–18. Tong L. Strength of adhesively bonded single-lap and lap-shear joints. Int J Solids Struct 1998; 35:2601–16. Tong L. Bond strength for adhesive-bonded single-lap joints. Acta Mech 1996;117:101–13. Hart-Smith LJ. Adhesive-bonded double-lap joints. NASA CR-112235. National Aeronautics and Space Administration; 1973.
Harris JA, Adams RD. Strength prediction of bonded single lap joints by nonlinear finite element method. Int J Adhes Adhes 1984;4:65–78.
Park YB, Song M-G, Kim J-J., Kweon J-H, Choi J-H., Strength of carbon/epoxy composite singlelap bonded joints in various environmental conditions, Composite Structures 92 (2010) 2173–2180.
Goglio L, Rossetto M, Precision of the one-dimensional solutions for bonded double lap joints, International Journal of Adhesion and Adhesives 31 (2011) 301-314.
S.M.R. Khalili, S. Khalili, M.R. Pirouzhashemi, A. Shokuhfar, R.K. Mittal, Numerical study of lap joints with composite adhesives and composite adherends subjected to in-plane and transverse loads, International Journal of Adhesion & Adhesives 28 (2008) 411– 418. Reis PNB, Antunes FJV, Ferreira JAM. Compos Struct 2004;67:125. M. Arenas J, J.Narbo´n J, Alı´ C, Optimum adhesive thickness in structural adhesives joints using statistical techniques based on Weibull distribution, International Journal of Adhesion & Adhesives 30 (2010) 160–165.
Adams RD, Comyn J, Wake WC., Structural adhesive joints in engineering. London: Chapman &