KaydedilenlerDerginizi ekleyin

Dergiler / Politeknik Dergisi / 2022 / Cilt: 25 - Sayı: 1

Using Sulphur Concrete on Defense Buildings

İlker Bekir TOPÇU
Muhammed Emre DANIŞ
Sayfa
9–17
Yayın Tarihi
2022-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In addition, compressive test results is given at the performed with SC sample.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Sulphur concrete (SC) is a concrete type without water and cement in the concrete mix.
📊
Temel Bulgular & Veri:It becomes binder by heating sulphur up to 114 oC.
💡
Sonuç & Katkı:In addition, compressive test results is given at the performed with SC sample.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Sulphur concrete · defense area · strength

Özet

Sulphur concrete (SC) is a concrete type without water and cement in the concrete mix. It becomes binder by heating sulphur up to 114 oC. Sulphur combines with aggregate to reach high strengths. Flexural and splitting tensile strength is higher than cement reinforced concrete. It gets 80% of its strength in 24 hours and is ready to use in a short time. Also, it has very high resistance against aggressive environments. The porosity rate is partially low. SC can provide resistance to radiation with low thickness. Also, it is very easy to provide. Besides mineral deposits, it can be produced as waste in oil and natural gas production. It has resistance of fire. This concrete can be repaired locally against damage and deformations. According to studies, it provides its strength before damage. Using SC in military or critical buildings will reduce the damage to the building. Making shelters from SC at the operation site will be more resistant in a shorter time. This article will describe the use of SC in the field of defense. In addition, compressive test results is given at the performed with SC sample.

Abstract

Sulphur concrete (SC) is a concrete type without water and cement in the concrete mix. It becomes binder by heating sulphur up to 114 oC. Sulphur combines with aggregate to reach high strengths. Flexural and splitting tensile strength is higher than cement reinforced concrete. It gets 80% of its strength in 24 hours and is ready to use in a short time. Also, it has very high resistance against aggressive environments. The porosity rate is partially low. SC can provide resistance to radiation with low thickness. Also, it is very easy to provide. Besides mineral deposits, it can be produced as waste in oil and natural gas production. It has resistance of fire. This concrete can be repaired locally against damage and deformations. According to studies, it provides its strength before damage. Using SC in military or critical buildings will reduce the damage to the building. Making shelters from SC at the operation site will be more resistant in a shorter time. This article will describe the use of SC in the field of defense. In addition, compressive test results is given at the performed with SC sample.

🔖

Bu Makaleye Atıf Yap

TOPÇU, İ. B., DANIŞ, M. E. (2022). Using Sulphur Concrete on Defense Buildings. Politeknik Dergisi, Cilt: 25 - Sayı: 1, 9–17. https://ajindex.com/articles/422229

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Topçu, İ.B., Işıkdağ, B., “An Overview on the Properties of Sulphurous Concrete”
  2. Intern. Conf. on Civil and Environmental Engineering (ICOCEE), Çeşme İzmir, 449-452, (2018)
  3. Tunç, G, Demirtürk, D, “Waterless concrete and Reality of Turkey”, Ready Mixed Concrete Journal, 69-82, (2016)
  4. Mohammed, S, Poornima, V., Strength and Durability study of Sulphur Concrete with Replaced fine aggregate, Materials Today(IConAMMA), 23888–23897, (2018)
  5. McBee, C.W., Weber, H.H., “Sulphur Polymer Cement Concrete”, Proceedings of the Twelfth Annual Department of Energy Low-Level Waste Management Conference(CONF-9008), Idaho National Engineering Laboratory, Idaho Falls, Idaho, 120-141, (1990)
  6. Mohamed, A.M., Gamal, M.M., “Sulphur Concrete for the Construction Industry”, Sulphur Concrete for the Construction Industry, J. Ross Publishing, (2010)
  7. Yue, L, Caiyun, J., Yunping, X., “The Properties of Sulphur Concrete”, Journal of Wuhan University of Technology, 21:129-133, (2006)
  8. Toutanji, H., Tucker. D., Ethridge. E., New Fiber Reinforced Waterless Concrete for Extraterrestrial Structural Applications, 12. International Conference on Composites/Nano Engineering, Tenerife, Canary Islands; Spain (2005)
  9. Mattus, C.H., Mattus, A.J., “Evaluation of Sulphur polymer cement as a waste form for the immobilization of low-level radioactive or mixed waste”, Chemical Technology Division, (1994)
  10. Darnell, G.R., Aldrich, W.C., Logan, J.A., “Full-scale Tests of Sulphur Polymer Cement and Non-Radioactive Waste in Heated and Unheated Prototypical Containers”, Idaho National Engineering Laboratory EG&G, Idaho Falls, Idaho, (1992)
  11. Bretz, T. E., “Properties of Sulphur Concrete”, Air Force Institute of Technology(ATC), 79, (1979)
  12. Loov, R.E., Vroom, A.H., Ward, M.A. “Sulphur Concrete - A New Construction Material”, Journal of the Prestressed Concrete Institute, 86-95, (1974)
  13. Gracia, V., Vàzquez, E., Carmona S., “Utilization of by-produced Sulphur for the manufacture of unmodified Sulphur concrete”. Int. RILEM Conference on the Use of Recycled Materials in Building and Structures, 054-1063, (2004)
  14. Anyszka, R., Bieliński, D.M., Siciński M., Imiela M., Szajerski P., Pawlica J., Walendziak R., “Sulphurous Concrete–Promising Material for Space-Structures Building”, Nasa NTRS, (2016)
  15. Vlahović, M.M., Martinovic, S., Tatjana, T.D, Husovic, V., “Durability of Sulphurous concrete in various aggressive environments”, Construction and Building