KaydedilenlerDerginizi ekleyin

Dergiler / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 4

Experimental and Statistical Analysis of Effect of Si Modification and Grain Refinement on Tensile Properties of A356 Alloy

Muhammet ULUDAĞ
Sayfa
1409–1417
Yayın Tarihi
2021-12-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It was found that while Ti grain refinement addition positively affects the mechanical properties, Sr addition has a negative effect on casting quality.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The focus point of recent research on light metal castings has been on the effect of casting quality on the material properties and maximizing the quality is the most important factor toward obtaining the best properties from an alloy.
📊
Temel Bulgular & Veri:Therefore, this study has been performed to evaluate the relationship between casting quality and tensile properties of A356 alloy.
💡
Sonuç & Katkı:It was found that while Ti grain refinement addition positively affects the mechanical properties, Sr addition has a negative effect on casting quality.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:A356 alloy · modification · grain refinement

Özet

The focus point of recent research on light metal castings has been on the effect of casting quality on the material properties and maximizing the quality is the most important factor toward obtaining the best properties from an alloy. Sr additions modify Si morphology while grain refiners such as AlTixBy and Ti-free B make dendrite arms smaller in the alloy. Therefore, this study has been performed to evaluate the relationship between casting quality and tensile properties of A356 alloy. The modification and refinement treatments were carried out with three different master alloys: AlSr15, AlTi5B1, and AlB3. The tests were conducted under two conditions: with and without degassing to evaluate the effect of change in melt quality. Results obtained from experimental studies were analyzed statistically. It was concluded that there is a good relationship between bifilm index and tensile test results when the bifilm index is divided into three groups, namely: poor, medium and high quality. It was found that while Ti grain refinement addition positively affects the mechanical properties, Sr addition has a negative effect on casting quality.

Abstract

The focus point of recent research on light metal castings has been on the effect of casting quality on the material properties and maximizing the quality is the most important factor toward obtaining the best properties from an alloy. Sr additions modify Si morphology while grain refiners such as AlTixBy and Ti-free B make dendrite arms smaller in the alloy. Therefore, this study has been performed to evaluate the relationship between casting quality and tensile properties of A356 alloy. The modification and refinement treatments were carried out with three different master alloys: AlSr15, AlTi5B1, and AlB3. The tests were conducted under two conditions: with and without degassing to evaluate the effect of change in melt quality. Results obtained from experimental studies were analyzed statistically. It was concluded that there is a good relationship between bifilm index and tensile test results when the bifilm index is divided into three groups, namely: poor, medium and high quality. It was found that while Ti grain refinement addition positively affects the mechanical properties, Sr addition has a negative effect on casting quality.

🔖

Bu Makaleye Atıf Yap

ULUDAĞ, M. (2021). Experimental and Statistical Analysis of Effect of Si Modification and Grain Refinement on Tensile Properties of A356 Alloy. Politeknik Dergisi, Cilt: 24 - Sayı: 4, 1409–1417. https://ajindex.com/articles/422179

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (22)

  1. Campbell, J., Complete casting handbook: metal casting processes, metallurgy, techniques and design, Butterworth-Heinemann, (2015)
  2. Gruzleski, J. and B. Closset, The treatment of liquid aluminum–silicon alloys. Des Plaines, IL: American Foundrymen’s Society, Inc. (1990), [3] Zhang, L., Y. Jiang, Z. Ma, S. Shan, Y. Jia, C. Fan, and W. Wang, Journal of materials processing technology, 207 (1): 107-111, (2008)
  3. Wang, Q., Metallurgical and materials Transactions A, 34 (12): 2887-2899, (2003)
  4. Wang, Q., D. Apelian, and D. Lados, Journal of light metals, 1 (1): 85-97, (2001)
  5. Taghavi, F., H. Saghafian, and Y.H. Kharrazi, Materials & Design, 30 (1): 115-121, (2009)
  6. Timelli, G., D. Caliari, and J. Rakhmonov, Journal of Materials Science & Technology, 32 (6): 515-523, (2016)
  7. Uludağ, M., Çetin R., and Dispinar D., Metallurgical and Materials Transactions A, 49 (5): 1948-1961, (2018)
  8. Uludağ, M., Çetin R., Dispinar D., and Tiryakioğlu M., International Journal of Metalcasting, 12 (4): 853-860, (2018)
  9. Uludağ, M., Çetin R., Dispinar D., and Tiryakioğlu M., Engineering Failure Analysis, 90: 90-102, (2018)
  10. Uludağ, M., Çetin R., Dispinar D., and Tiryakioğlu M., International Journal of Metalcasting, 12 (3): 589-594, (2018)
  11. Conley, J.G., J. Huang, J. Asada, and K. Akiba, Materials science and Engineering: A, 285 (1): 49-55, (2000)
  12. Emadi, D., J. Gruzleski, and J. Toguri, Metallurgical and Materials Transactions B, 24 (6): 1055-1063, (1993)
  13. Huang, J., J.G. Conley, and T. Mori, Metallurgical and Materials Transactions B, 29 (6): 1249-1260, (1998)
  14. Roy, N., A. Samuel, and F. Samuel, Metallurgical and Materials transactions A, 27 (2): 415-429, (1996)
  15. Campbell, J., Metallurgical and Materials Transactions B, 37 (6): 857-863, (2006)
  16. Campbell, J., Materials science and technology, 22 (2): 127-145, (2006)
  17. Campbell, J. The bifilm concept: prospects of defect-free castings, in World Foundry Congress, Chennai, India. (2008)
  18. Dispinar, D. and J. Campbell, International Journal of Cast Metals Research, 17 (5): 280-286, (2004)
  19. Dispinar, D. and J. Campbell, International Journal of Cast Metals Research, 17 (5): 287-294, (2004)
  20. Fiorese, E., F. Bonollo, G. Timelli, L. Arnberg, and E. Gariboldi, International Journal of Metalcasting, 9 (1): 55-66, (2015)
  21. Birol, Y., International Journal of Cast Metals Research, 23 (4): 250-255, (2010)
  22. El-Sayed, M.A. and K. Essa, Computational a