Dergiler / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 3

Lightweight geopolymer fly ash sand: an alternative to fine aggregate for concrete production

Sayfa
375–391
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The study indicates that LWGFAS can be suitable for a wide range of applications in making concrete ranging from light weight in nature to normal weight concrete based on the physical and chemical characteristics of Geopolymer Fly Ash Sand.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The current study is aimed to evaluate and critically analyze the properties of Light Weight Geopolymer Fly Ash Sand (LWGFAS).
📊
Temel Bulgular & Veri:Liquid solution of 4M NaOH, and Na2SiO3/NaOH=2 was used as an activator and post set heat treatment of 1 hour at 100 oC was applied for preparation of LWGFAS.
💡
Sonuç & Katkı:The study indicates that LWGFAS can be suitable for a wide range of applications in making concrete ranging from light weight in nature to normal weight concrete based on the physical and chemical characteristics of Geopolymer Fly Ash Sand.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

The current study is aimed to evaluate and critically analyze the properties of Light Weight Geopolymer Fly Ash Sand (LWGFAS). LWGFAS has been prepared by geopolymerisation of the fly ash. Liquid solution of 4M NaOH, and Na2SiO3/NaOH=2 was used as an activator and post set heat treatment of 1 hour at 100 oC was applied for preparation of LWGFAS. The LWGFAS sample was analyzed for different physical and chemical parameters along with studies on mineralogy and alkali silica reactivity. The molar concentration of activator solution and duration of post set heat treatment plays vital role on the physical and mechanical properties (particularly specific gravity, bulk density and water absorption) of the Geopolymer fly ash sand. The specific gravity and water absorption of LWGFAS were 1.57 and 17.85% respectively. Experimental concrete mixes made with LWGFAS as a replacement of natural sand were evaluated for compressive strength and different durability properties of concrete. The study indicates that LWGFAS can be suitable for a wide range of applications in making concrete ranging from light weight in nature to normal weight concrete based on the physical and chemical characteristics of Geopolymer Fly Ash Sand.

🔖

Bu Makaleye Atıf Yap

OJHA, P. N., SINGH, B., KAURA, P., SINGH, A. (2021). Lightweight geopolymer fly ash sand: an alternative to fine aggregate for concrete production. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 3, 375–391. https://ajindex.com/articles/389556

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Wang R, Yu N, Li Y. Methods for improving the microstructure of recycled concrete aggregate: A review, Construction and Building Materials, Volume 242, May 2020
  2. Palomo, Grutzeck MW, Blanco MT. Alkali-activated Fly Ashes A cement for the future, Journal of Cement and Concrete Research, 1999, Vol. 29, pp. 1323-1329.
  3. World Business Council for Sustainable Development, Recycling Concrete-The Cement Sustainability Initiative Report, 2009
  4. Donza H, Cabrera O, Irassar EF. High-strength concrete with different fine aggregate, Cement and Concrete Research, 2002; 32: 1755-1761.
  5. Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV. Fly Ash-Based Geopolymer Concrete Australian Journal of Structural Engineering, January 2005; 6:1, 1-10.
  6. Report on Fly Ash Generation at Coal/ Lignite Based Power station and its Utilization in the Country for the Year 2014-15, Centre Electricity Authority, New Delhi, October 2015
  7. Dasha MK, Patro SK, Ratha AK. Sustainable use of industrial-waste as partial replacement of fine aggregate for preparation of concrete - A review, International Journal of Sustainable Built Environment, 2016; 5:2, 484 - 516.
  8. James MN, Choi W, Abu-Lebdeh T. Use of Recycled Aggregate and Fly Ash in Concrete Pavement, Am. J. Engg. & Applied Science, 2011; 4: 201 – 208
  9. Toshiki A, Osamu K, Kenji S. Concrete with copper slag fine aggregate, J. Soc. Mater. Sci. 2000; 49; 1097 - 1102.
  10. Nisnevich M, Sirotin G, Dvoskin L, Fishel J. Using High-Volume Fly Ash in Lightweight Concrete with Bottom Ash as Aggregate, Proceeding of the Seventh CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag and Natural Pozzolans in Concrete, 2001, Madras, India, 99 - 114
  11. IS 9142 Part 2:2018, Artificial lightweight aggregate for concrete - Sintered fly ash coarse aggregate
  12. Palomo A, Macias A, Blanco MT, Puertas F. Physical, Chemical and Mechanical Characterization of Geopolymer, Proceedings of the 9th International Congress on the Chemistry of Cement, New Delhi, India, 23-28 November 1992
  13. Duxson P, Lukey GC, Deventer V. Physical evolution of Na-geopolymer derived from metakaolin up to 1000°, Journal of Material Science.