Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightThe low value of S/Se (1448) suggests the impact of local/citywidestationary coal combustion sources located to the NeNE of the monitoring site.
📌 3 Maddede Bu Makale
Özet
Positive Matrix Factorization (PMF) was used to identify sources of PM0.09e0.26, very fine aerosol particles,in a residential district of Ostrava Radvanice and Bartovice, a European air pollution hot-spot. Two-hoursresolved elemental composition of very fine particulate matter samples were collected by the eighthstage of Davis Rotating-drum Universal-size-cut Monitoring (DRUM) impactor for the campaign period ofthe 26th January to the 21st February 2012. The campaign consists of smog (26.1e14.2) and post-smog(15e21.2) periods defined by their PM1 concentrations. Three factors were resolved by PMF: coal combustion,raw iron production and steel production. Coal combustion, associated with high concentrationsof Se, Br, Pb, K, and As, dominated during the whole period. The contribution of raw iron production, afactor with high concentration of Mn, Fe, Co and Cr, increased significantly when ambient air temperatureand the wind direction changed from NE to SW. Alternatively, the contributions of steel production,associated with Cl, K and Zn, were high under NE winds and decreased during the post-smog period. Themass of very fine particles correlated well with CO concentrations (smog r2 ¼ 0.86, post-smog r2 ¼ 0.43),which may indicate an industrial plume. The low value of S/Se (1448) suggests the impact of local/citywidestationary coal combustion sources located to the NeNE of the monitoring site.