Promotional effect of SO2 on CeO2eTiO2 material for elemental mercury removal at low temperature

In the process of Hg0 removal with SO2 presence, the redox couple of[CeO2 (Ce4þ) 4 Ce2O3 (Ce3þ)] played a significant role in Hg0 removal to proceed, and SO2 made animportant contribution to this redox process.

📌 3 Maddede Bu Makale

🎯

Amaç & Hipotez:The influence of SO2 on Hg0 removal behavior over CeO2eTiO2 (CeTi) adsorbent prepared by a solegelmethod was investigated at low temperature.

📊

Temel Bulgular & Veri:The fresh, sulfated, and used materials were well characterizedby means of N2 physisorption, X-ray diffraction (XRD), Fourier transform infrared spectroscopy(FTIR), Raman, hydrogen gas temperatureeprogrammed reduction (H2eTPR), thermal gravimetric anddifferential scanning calorimetry (TGeDSC), and X-ray photoelectron spectroscopy (XPS) techniques toillustrate the promotional mechanism of SO2 on Hg0 removal.

💡

Sonuç & Katkı:In the process of Hg0 removal with SO2 presence, the redox couple of[CeO2 (Ce4þ) 4 Ce2O3 (Ce3þ)] played a significant role in Hg0 removal to proceed, and SO2 made animportant contribution to this redox process.

🔬Tür:Araştırma Makalesi

📍Kapsam:Genişletilmiş Akademik Örneklem

⚙️Değişkenler:Alan Parametreleri

Özet

The influence of SO2 on Hg0 removal behavior over CeO2eTiO2 (CeTi) adsorbent prepared by a solegelmethod was investigated at low temperature. The fresh, sulfated, and used materials were well characterizedby means of N2 physisorption, X-ray diffraction (XRD), Fourier transform infrared spectroscopy(FTIR), Raman, hydrogen gas temperatureeprogrammed reduction (H2eTPR), thermal gravimetric anddifferential scanning calorimetry (TGeDSC), and X-ray photoelectron spectroscopy (XPS) techniques toillustrate the promotional mechanism of SO2 on Hg0 removal. The results indicated that in the initialreaction period, the Hg0 removal efficiency significantly increased with the presence of SO2 because ofthe reaction between CeTi and SO2. With the sulfation time increasing, the promotional effect of SO2 onHg0 removal over CeTi adsorbent gradually decreased due to the presence of large amount of ceriumsulfate species. The Hg0 removal efficiency over CeTi first increased with the reaction temperatureincreasing, and then decreased with further temperature rising above 150 C. The reducibility of CeTisignificantly decreased after sulfation, while the sulfation led to an enhancement of the Ce3þ contentformed on the adsorbent surface. In the process of Hg0 removal with SO2 presence, the redox couple of[CeO2 (Ce4þ) 4 Ce2O3 (Ce3þ)] played a significant role in Hg0 removal to proceed, and SO2 made animportant contribution to this redox process.

🔖

Bu Makaleye Atıf Yap

ZHANG, A., XİNG, W., ZHANG, Z., MENG, F., LİU, Z., XİANG, J., SUN, L. (2016). Promotional effect of SO2 on CeO2eTiO2 material for elemental mercury removal at low temperature. Atmospheric Pollution Research, Cilt: 7 - Sayı: 5, 895–902. https://ajindex.com/articles/351431

Kaynakça (2)

Chang, H.Z., Chen, X.Y., Li, J.H., Ma, L., Wang, C.Z., Liu, C.X., Schwank, J.W., Hao, J.M., 2013. Improvement of activity and SO2 tolerance of Sn-modified MnOxeCeO2 catalysts for NH3-SCR at low temperatures. Environ. Sci. Technol. 47, 5294e5301. Chen, L., Li, J.H., Ge, M.F., Zhu, R.H., 2010. Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia. Catal. Today 153, 77e83. Department of Science, Technology and Standards of the Ministry of Environmental Protection, 2012. GB 13223e2011 Emission Standard of Air Pollutants for Thermal Power Plants. China Environmental Science Press, Beijing (in Chinese). Du, X.S., Gao, X., Cui, L.W., Fu, Y.C., Luo, Z.Y., Cen, K.F., 2012. Investigation of the effect of Cu addition on the SO2-resistance of a CeeTi oxide catalyst for selective catalytic reduction of NO with NH3. Fuel 92, 49e55. Fan, X.P., Li, C.T., Zeng, G.M., Zhang, X., Tao, S.S., Lu, P., Tan, Y., Luo, D.Q., 2012. Hg0 removal from simulated flue gas over CeO2/HZSM-5. Energy Fuels 26, 2082e2089.
Fang, J., Bi, X.Z., Si, D.J., Jiang, Z.Q., Huang, W.X., 2007. Spectroscopic studies of interfacial structures of CeO2eTiO2 mixed oxides. Appl. Surf. Sci. 253, 8952e8961. Granite, E.J., Pennline, H.W., Hargis, R.A., 2000. Novel sorbents for mercury removal from flue gas. Ind. Eng. Chem. Res. 39, 1020e1029. Gu, T.T., Liu, Y., Weng, X.L., Wang, H.Q., Wu, Z.B., 2010. The enhanced performance of ceria with surface sulfation for selective catalytic reduction of NO by NH3. Catal. Commun. 12, 310e313. Guo, Y.F., Yan, N.Q., Yang, S.J., Liu, P., Wang, J., Qu, Z., Jia, J.P., 2012. Conversion of elemental mercury with a novel membrane catalytic system at low temperature. J. Hazard. Mater. 213e214, 62e70. He, J., Reddy, G.K., Thiel, S.W., Smirniotis, P.G., Pinto, N.G., 2011. Ceria-modified manganese oxide/titania materials for removal of elemental and oxidized mercury from flue gas. J. Phys. Chem. C 115, 24300e24309. Hou, W.H., Zhou, J.S., Qi, P., Gao, X., Luo, Z.Y., 2014. Effect of H2S/HCl on the removal of elemental mercury in syngas over CeO2eTiO2. Chem. Eng. J. 241, 131e137. Jensen, H., Soloviev, A., Li, Z.S., Søgaard, E.G., 2005. XPS and FTIR investigation of the surface properties of different prepared titania nano-powders. Appl. Surf. Sci. 246, 239e249. Jin, R.B., Liu, Y., Wang, Y., Cen, W.L., Wu, Z.B., Wang, H.Q., Weng, X.L., 2014. The role of cerium in the improved SO2 tolerance for NO reduction with NH3 over MneCe/TiO2 catalyst a