Dergiler / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 2

On the Compression Properties and Erosion-Corrosion Behaviour of Al 6061/15%Sicp Composite

Sayfa
415–425
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Also, the erosion corrosion resistance increased with adding SiC particles to Al 6061 alloy.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Aluminum alloys and composites are used in automobile and aerospace industries due to good mechanical properties, higher corrosion resistance and light weight.
📊
Temel Bulgular & Veri:In this paper, ring specimens produced from Al 6061 /15%SiCp composite were subjected to uniaxial hot compression test to invistigate the deformation behavior of the material.
💡
Sonuç & Katkı:Also, the erosion corrosion resistance increased with adding SiC particles to Al 6061 alloy.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Al6061/15%SiC composite · Flow stress · Finite element modeling

Özet

Aluminum alloys and composites are used in automobile and aerospace industries due to good mechanical properties, higher corrosion resistance and light weight. In this paper, ring specimens produced from Al 6061 /15%SiCp composite were subjected to uniaxial hot compression test to invistigate the deformation behavior of the material. The tests were performed at high temperatures ranged from 300 oC to 500 °C and strain rates of 0.008 s−1 to 2.7 s−1. The flow stress-strain curve at different strain rates and temperatures was determined. The regression analysis was performed to predict the flow stress during the compression test. The comparison between the experimental and theoretical results was also conducted. In addition, finite element method was applied to simulate and validate the compression behavior of the composite ring. Furthermore, the erosion-corrosion tests by slurry pot method were conducted to examine the influence of SiC particles on erosion corrosion resistance of the material. The results showed that the flow stress of the Al6061/15/vol.%SiCp composite is correlated directly with temperature and strain rate. Also, the erosion corrosion resistance increased with adding SiC particles to Al 6061 alloy.

Abstract

Aluminum alloys and composites are used in automobile and aerospace industries due to good mechanical properties, higher corrosion resistance and light weight. The compression test of materials at elevated temperature is useful to study the flow stress, workability, and the analysis of the processing conditions. In this paper, ring specimens produced from Al 6061 /15%SiCp composite were subjected to uniaxial hot compression tests to invistigate the deformation behavior of the material. The tests were performed at high temperatures ranged from 300 oC to 500 °C and strain rates of 0.008 s−1 to 2.7 s−1. The flow stress-strain curve at different strain rates and temperatures was determined. The regression analysis was performed to predict the flow stress during the compression test. The comparison between the experimental and theoretical results was also conducted. In addition, finite element method was applied to simulate and validate the compression behavior of the composite ring. Furthermore, the erosion-corrosion tests by slurry pot method were conducted to examine the influence of SiC particles on erosion corrosion resistance of the material. The results showed that the flow stress of the Al6061/15/vol.%SiCp composite is correlated directly with temperature and strain rate. Also, the erosion corrosion resistance increased with adding SiC particles to Al 6061 alloy.

🔖

Bu Makaleye Atıf Yap

IRFAN, O. M., ALABOODI, A. S. (2020). On the Compression Properties and Erosion-Corrosion Behaviour of Al 6061/15%Sicp Composite. Politeknik Dergisi, Cilt: 23 - Sayı: 2, 415–425. https://ajindex.com/articles/307521

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Osama M. Irfan and Hanafy M. Omar, (2017), Experimental Study and Prediction of Erosion-Corrosion of AA6066 Aluminum Using Artificial Neural Network, International Journal of Mechanical & Mechatronics Engineering IJMME, Vol:17 No:06, pp. 1-14
  2. Xiao Pu, LI.; LIU Chong, Y.; Xiao Wei, SUN; Ming Zhen, MA; Ri Ping, LIU. (2016). Hot deformation behavior and processing maps of AA6061-10 vol.% SiC composite prepared by spark plasma sintering, SCIENCE CHINA Technological Sciences 59(6): 980–988
  3. Gopalakrishnan, S.; Murugan, N. (2012). Production and wear characterization of AA 6061-matrix titanium carbide particulate reinforced composite by enhanced stir casting method, Compos Part B-Engineering 43:302–308
  4. Ashwath, P.; Xavior, M.A. Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys. J. Mater. Res. (2016), 31, 1201–1219
  5. Zhang, Q.; Ma, X. Y.; Wu, G. H. (2013). Interfacial microstructure of SiCp/Al composite produced by the pressureless infiltration technique. Ceram Int 39: 4893–4897
  6. Zhang, J. T.; Liu, L. S.; Zhai, P. C. (2008). Effect of fabrication process on the microstructure and dynamic compressive properties of SiCp/Al composites fabricated by spark plasma sintering, Material Letters, 62: 443–446
  7. Reddy, P.S.; Kesavan, R.; Vijaya Ramnath, B. Investigation of mechanical properties of aluminum 6061-silicon carbide, boron carbide metal matrix composite. Silicon (2017), 9, 1– 8
  8. El-Sabbagh, A.; Soliman, M.; Taha, M. (2012). Hot rolling behavior of stir-cast Al 6061 and Al 6082 alloys-SiC fine particulates reinforced composites. J Mater Process Tech 212: 497–508
  9. Taha, M. A.; El-Mahallawy, N. A.; El-Sabbagh, A. M. (2008). Some Experimental Data on Workability of Aluminum-Particulate-Reinforced Metal Matrix Composites, J. Mater. Process. Techno 202 (1–3): 380–385
  10. Zabihi, M.; Toroghinejad, M. R.; Shafyei, A. (2013). Application of powder metallurgy and hot rolling processes for manufacturing aluminum/ alumina composite strips. Mat Sci Eng A-Struct. 560: 567–574
  11. Agus Pramono; Lembit Kommel; Lauri Kollo; Renno Veinthal. (2016). The Aluminum Based Composite Produced by Self-Propagating High Temperature Synthesis, MATERIALS SCIENCE 22(1): 41-43
  12. Pitchayyapillai, G.; Seenikannan, P.; Raja, K.; Chandrasekaran, K. Al6061 hybrid metal matrix composite reinforced with alumina and molybdenum disulphide. Adv. Mater. Sci. Eng. (2016), 2016, 6127624
  13. Ch Hima G