KaydedilenlerDerginizi ekleyin

Dergiler / Politeknik Dergisi / 2018 / Cilt: 21 - Sayı: 3

Flexure Analysis of Laminated Composite and Sandwich Beams Using Timoshenko Beam Theory

ARMAĞAN FATİH KARAMANLI
Sayfa
633–643
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

At the same time, the problems not only for the convergence analysis but also for the extensive analysis are also solved by using the Euler-Bernoulli beam theory for comparison purposes.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The static behaviour of laminated composite and sandwich beams subjected to various sets of boundary conditions is investigated by using the Timoshenko beam theory and the Symmetric Smoothed Particle Hydrodynamics (SSPH) method.
📊
Temel Bulgular & Veri:In order to solve the problem, a SSPH code which consists of up to sixth order derivative terms in Taylor series expansion is developed.
💡
Sonuç & Katkı:At the same time, the problems not only for the convergence analysis but also for the extensive analysis are also solved by using the Euler-Bernoulli beam theory for comparison purposes.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Meshless method · composite beam · SSPH method

Özet

The static behaviour of laminated composite and sandwich beams subjected to various sets of boundary conditions is investigated by using the Timoshenko beam theory and the Symmetric Smoothed Particle Hydrodynamics (SSPH) method. In order to solve the problem, a SSPH code which consists of up to sixth order derivative terms in Taylor series expansion is developed. The validation and convergence studies are performed by solving symmetric and anti-symmetric cross-ply composite beam problems with various boundary conditions and aspect ratios. The results in terms of mid-span deflections, axial and shear stresses are compared with those from previous studies to validate the accuracy of the present method. The effects of fiber angle, lay-up and aspect ratio on mid-span displacements and stresses are studied. At the same time, the problems not only for the convergence analysis but also for the extensive analysis are also solved by using the Euler-Bernoulli beam theory for comparison purposes.

Abstract

The static behaviour of laminated composite and sandwich beams subjected to various sets of boundary conditions is investigated by using the Timoshenko beam theory and the Symmetric Smoothed Particle Hydrodynamics (SSPH) method. In order to solve the problem, a SSPH code which consists of up to sixth order derivative terms in Taylor series expansion is developed. The validation and convergence studies are performed by solving symmetric and anti-symmetric cross-ply composite beam problems with various boundary conditions and aspect ratios. The results in terms of mid-span deflections, axial and shear stresses are compared with those from previous studies to validate the accuracy of the present method. The effects of fiber angle, lay-up and aspect ratio on mid-span displacements and stresses are studied. At the same time, the problems not only for the convergence analysis but also for the extensive analysis are also solved by using the Euler-Bernoulli beam theory for comparison purposes.

🔖

Bu Makaleye Atıf Yap

KARAMANLI, A. F. (2018). Flexure Analysis of Laminated Composite and Sandwich Beams Using Timoshenko Beam Theory. Politeknik Dergisi, Cilt: 21 - Sayı: 3, 633–643. https://ajindex.com/articles/307138

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Nguyen T.K., Nguyen N.D., Vo T.P., Thai H.T., “Trigonometric-series solution for analysis of laminated composite beams”, Compos Struct, 160:142-151, (2017)
  2. Timoshenko S.P., Goodier J.C., “Theory of Elasticity”, McGraw-Hill Co. Inc., New York, 1970
  3. Wang C.M., Reddy J.N., Lee, K.H., “Shear Deformable Beams and Plates Relations with Classical Solutions”, Elsevier Science Ltd., Oxford 2000
  4. Kant T., Manjunath B.S., “Refined theories for composite and sandwich beams with C0 finite elements”, Comput Struct, 33(3):755–764, (1989)
  5. Khdeir A.A., Reddy J.N., “An exact solution for the bending of thin and thick cross-ply laminated beams”, Compos Struct 37(2):195–203, (1997)
  6. Soldatos K.P., Watson P., “A general theory for the accurate stress analysis of homogeneous and laminated composite beams”, Int J Solids Struct. 34(22): 2857– 2885, (1997)
  7. Shi G., Lam K.Y., Tay T.E., “On efficient finite element modeling of composite beams and plates using higher- order theories and an accurate composite beam element”, Compos Struct, 41(2):159–165, (1998)
  8. Zenkour A. M., “Transverse shear and normal deformation theory for bending analysis of laminated and sandwich elastic beams”, Mechanics of Composite Materials & Structures, 6(3): 267-283 (1999)
  9. Karama M., Afaq K.S., Mistou S., “Mechanical behaviour of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity”, Int J Solids Struct., 40(6):1525– 1546, (2003)
  10. Murthy M.V.V.S., Mahapatra D.R., Badarinarayana K., Gopalakrishnan S., “A refined higher order finite element for asymmetric composite beams”, Compos Struct, 67(1):27–35, (2005)
  11. Vidal P., Polit O., “A family of sinus finite elements for the analysis of rectangular laminated beams”, Compos Struct, 84(1):56–72, (2008)
  12. Aguiar R.M., Moleiro F., Soares C.M.M., “Assessment of mixed and displacement-based models for static analysis of composite beams of different cross-sections”, Compos Struct, 94 (2):601–616, (2012)
  13. Nallim L.G., Oller S., Onate E., Flores F.G., “A hierarchical finite element for composite laminated beams using a refined zigzag theory”, Compos Struct, 163:168–184, (2017)
  14. Vo T.P., Thai H.T., Nguyen T.K., Lanc D., Karamanli A., “Flexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory”, Compos Struct, 176:388-397, (2017)
  15. Donning B.M., Liu W.K., “Meshless methods for