Dergiler / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 1

Investigation of Ballistic Impact Response of Aluminum Alloys Hybridized with Kevlar/Epoxy Composites

Sayfa
219–227
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Which means that the plate with this orientation has exhibited the maximum energy absorbing characteristics.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this comparative study, ballistic impact responses of various aluminum alloys hybridized with Kevlar/Epoxy composite is investigated numerically.
📊
Temel Bulgular & Veri:The numerical models were developed using the explicit finite element module of ANSYS. 50 caliber projectile with an initial velocity of 400 m/s is used during the analyses.
💡
Sonuç & Katkı:Which means that the plate with this orientation has exhibited the maximum energy absorbing characteristics.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:2024 Verileri
⚙️Değişkenler:Ballistic impact · aluminum alloys · kevlar

Özet

In this comparative study, ballistic impact responses of various aluminum alloys hybridized with Kevlar/Epoxy composite is investigated numerically. The numerical models were developed using the explicit finite element module of ANSYS. 50 caliber projectile with an initial velocity of 400 m/s is used during the analyses. In the first part of the study, 7075, 6061 and 2024 aluminum alloys are compared for their ballistic impact resistance. Amount of perforation energies (energy absorbing capacity of target) and projectile residual velocities of these alloys are compared. Also, thicknesses of plates are increased up to the point at which the plates don't exhibit full perforations for the used projectile and initial velocity. It is seen that that residual velocity of the Al 7075 T6 is the smallest among the used aluminum alloys which means that 7075 T6 type of aluminum has the higher ballistic impact resistance. In the second part of the study, six different hybrid models that have different combinations of Al 7075 and Kevlar29/Epoxy are proposed. Perforation energies and projectile residual velocities of these proposed models are compared under ballistic impact loadings. It was shown that the hybrid model with 6AL-6KEV orientation, was the optimum structure to resist the ballistic impact loading among the proposed models. Which means that the plate with this orientation has exhibited the maximum energy absorbing characteristics.

Abstract

In this comparative study, ballistic impact responses of various aluminum alloys hybridized with Kevlar/Epoxy composite is investigated numerically. The numerical models were developed using the explicit finite element module of ANSYS. 50 caliber projectile with an initial velocity of 400 m/s is used during the analyses. In the first part of the study, 7075, 6061 and 2024 aluminum alloys are compared for their ballistic impact resistance. Amount of perforation energies (energy absorbing capacity of target) and projectile residual velocities of these alloys are compared. Also, thicknesses of plates are increased up to the point at which the plates don't exhibit full perforations for the used projectile and initial velocity. It is seen that that residual velocity of the Al 7075 T6 is the smallest among the used aluminum alloys which means that 7075 T6 type of aluminum has the higher ballistic impact resistance. In the second part of the study, six different hybrid models that have different combinations of Al 7075 and Kevlar29/Epoxy are proposed. Perforation energies and projectile residual velocities of these proposed models are compared under ballistic impact loadings. It was shown that the hybrid model with 6AL-6KEV orientation, was the optimum structure to resist the ballistic impact loading among the proposed models. Which means that the plate with this orientation has exhibited the maximum energy absorbing characteristics.

🔖

Bu Makaleye Atıf Yap

YETER, E. (2019). Investigation of Ballistic Impact Response of Aluminum Alloys Hybridized with Kevlar/Epoxy Composites. Politeknik Dergisi, Cilt: 22 - Sayı: 1, 219–227. https://ajindex.com/articles/307093

Kaynakça (13)

  1. Avery, J. ve Porter, T., “Comparisons of the ballistic impact response of metals and composites for military aircraft applications”, Foreign Object Impact Damage to Composites, ASTM International, 1975
  2. Anderson, C.E. ve Bodner, S.R., "Ballistic impact: the status of analytical and numerical modeling", International Journal of Impact Engineering, 7(1): 9-35, (1988)
  3. Lee, B., Song, J. ve Ward, J., "Failure of Spectra® polyethylene fiber-reinforced composites under ballistic impact loading", Journal of Composite Materials, 28(13): 1202-1226, (1994)
  4. Meyer, H.W. ve Kleponis, D.S., "Modeling the high strain rate behavior of titanium undergoing ballistic impact and penetration", International Journal of Impact Engineering, 26(1): 509-521, (2001)
  5. Demir, T., Übeyli, M. ve Yıldırım, R.O., "Investigation on the ballistic impact behavior of various alloys against 7.62 mm armor piercing projectile", Materials & Design, 29(10): 2009-2016, (2008)
  6. Mohotti, D., Ngo, T., Raman, S.N., Ali, M. ve Mendis, P., "Plastic deformation of polyurea coated composite aluminium plates subjected to low velocity impact", Materials & Design, 56: 696-713, (2014)
  7. Holmen, J.K., Johnsen, J., Hopperstad, O.S. ve Børvik, T., "Influence of fragmentation on the capacity of aluminum alloy plates subjected to ballistic impact", European Journal of Mechanics-A/Solids, 55: 221-233, (2016)
  8. Li, M.-Y., Xiong, B.-Q., Wang, G.-J., Tong, Y.-Z., Li, X.-W., Huang, S.-H., Li, Z.-H. ve Zhang, Y.-A., "Fracture mechanism of a laminated aluminum alloy plate during ballistic impact", Rare Metals, 36(9): 737-745, (2017)
  9. Jena, P., Sivakumar, K., Mandal, R. ve Singh, A., "Influence of Heat Treatment on the Ballistic Behavior of AA-7017 Alloy Plate against 7.62 Deformable Projectiles", Procedia Engineering, 173: 214-221, (2017)
  10. Majzoobi, G., Morshedi, H. ve Farhadi, K., "The effect of aluminum and titanium sequence on ballistic limit of bi-metal 2/1 FMLs", Thin-Walled Structures, 122: 1-7, (2018)
  11. Sharma, P., Chandel, P., Bhardwaj, V., Singh, M. ve Mahajan, P., "Ballistic impact response of high strength aluminium alloy 2014-T652 subjected to rigid and deformable projectiles", Thin-Walled Structures, (2017)
  12. Senthil, K., Iqbal, M., Arindam, B., Mittal, R. ve Gupta, N., "Ballistic resistance of 2024 aluminium plates against hemispherical, sphere and blunt nose projectiles", Thin-Walled Structures, (2017)
  13. Bendarma, A., Jankowiak, T., Łodygowski, T., Rusinek