Dergiler / Politeknik Dergisi / 2015 / Cilt: 18 - Sayı: 3

Investigating The Relationship Between Some Mechanical Properties and Weight Loss in Heat Treated Woods

Isıl İşlemli Odunlarda Bazı Mekanik Özellikler ve Ağırlık Kaybı Arasındaki İlişkinin Araştırılması

Sayfa
149–154
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Korelasyon katsayısı (R) eğilme direnci ve ağırlık kaybı arasında 0.89, elastikiyet modülü ve ağırlık kaybı arasında ise yaklaşık olarak 0.90 olarak tespit edildi.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, Doğu kayını ve Doğu ladini odunlarının eğilme direnci, elastikiyet modülü ve ağırlık kaybı üzerine ısıl işlemin etkileri incelendi ve ısıl işlemli odunların ağırlık kaybı ve mekanik özellikleri arasındaki ilişki çeşitli analizler yoluyla belirlendi.
📊
Temel Bulgular & Veri:Isı muamelesi atmosferik basınç altında üç farklı sıcaklık (130, 160 ve 190 ºC) ve üç farklı sürede (2, 6 ve 10 saat) bir fırında örneklere uygulandı.
💡
Sonuç & Katkı:Korelasyon katsayısı (R) eğilme direnci ve ağırlık kaybı arasında 0.89, elastikiyet modülü ve ağırlık kaybı arasında ise yaklaşık olarak 0.90 olarak tespit edildi.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Bu çalışmada, Doğu kayını ve Doğu ladini odunlarının eğilme direnci, elastikiyet modülü ve ağırlık kaybı üzerine ısıl işlemin etkileri incelendi ve ısıl işlemli odunların ağırlık kaybı ve mekanik özellikleri arasındaki ilişki çeşitli analizler yoluyla belirlendi. Deneysel örnekler Türkiye'nin Doğu Karadeniz bölgesinde doğal olarak yetişen ağaç türlerinden seçildi. Isı muamelesi atmosferik basınç altında üç farklı sıcaklık (130, 160 ve 190 ºC) ve üç farklı sürede (2, 6 ve 10 saat) bir fırında örneklere uygulandı. Sonuçlar muamele edilmiş örneklerin kontrol örneklerine kıyasla daha düşük eğilme direnci ve elastikiyet modülüne sahip olduğunu gösterdi. Maruz kalınan sıcaklık ve sürede bir artış eğilme direnci ve elastikiyet modülünde azalmaya yol açtı. Örneklerin ağırlık kayıpları artan muamele sıcaklığı ve suresi ile artış gösterdi. Ayrıca, eğilme direnci ve elastikiyet modülü değerlerindeki azalma yüzdesi, ağırlık kaybındaki artış yüzdesi ile güçlü bir ilişki gösterdi. Korelasyon katsayısı (R) eğilme direnci ve ağırlık kaybı arasında 0.89, elastikiyet modülü ve ağırlık kaybı arasında ise yaklaşık olarak 0.90 olarak tespit edildi.

Abstract

In this study, the effects of heat treatment on modulus of rupture (MOR), modulus of elasticity (MOE) and weight loss (WL) of beech (Fagus orientalis Lipsky.) and spruce (Picea orientalis (L.) Link.) woods were examined, and relationship between WL and the mechanical properties of the treated woods were determined by various analyzes. The experimental samples were selected from naturally grown woods in the Black Sea region of Turkey. Heat treatment was subjected to samples in an oven at three different temperatures (130, 160 and 190 ºC) and three different durations (2, 6 and 10 h) under atmospheric pressure. The results indicated that treated samples had lower MOR and MOE compared to control samples. An increase in exposure temperature and duration decreased MOR and MOE. WL of the samples increased with increasing treatment temperature and duration. Also, percentage reduction in MOR and MOE values showed a strong correlation with percentage increase in WL. The correlation coefficient (R) was determined as 0.89 between MOR and WL, and almost 0.90 between MOE and WL.

🔖

Bu Makaleye Atıf Yap

TİRYAKİ, S. (2015). Investigating The Relationship Between Some Mechanical Properties and Weight Loss in Heat Treated Woods. Politeknik Dergisi, Cilt: 18 - Sayı: 3, 149–154. https://ajindex.com/articles/306591

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (5)

  1. Ates S., Akyildiz M.H. and Ozdemir H., "Effects of heat treatment on Calabrian pine (Pinus brutia Ten.) wood", Bioresources, 4(3): 1032-1043, (2009) Korkut S., "The effects of heat treatment on some technological bornmuellerinana Environment, 43(4): 422-428, (2008) wood", Building and Mattf.) Syrjanen T. and Oy K., "Production and classification of heat-treated wood in Finland, review on heat treatments of wood", In: Proceedings of the special seminar held in Antibes, France, (2001) Militz H., "Thermal treatment of wood: European processes and their background", IRG/WP 02-40241. In: 33rd Annual Meeting, May 12-17, Cardiff-Wales 4, pp. 1-17, (2002) Gunduz D. and Aydemir D., "The influence of mass loss on the mechanical properties of heat-treated black pine wood", Wood Research, 54 (4): 33-42, (2009)
  2. Altinok M., Ozalp M. and Korkut S., "The effects of heat treatment on some mechanical properties of laminated beech (Fagus orientalis L.) wood". Wood Research, 55 (3): 131-142, (2010)
  3. Yildiz S., Gezer E.D. and Yildiz U.C., "Mechanical and chemical behavior of spruce wood modified by heat", Building Environment, 41 (12): 1762-1766, (2006) Rusche H., "Thermal degradation of wood at temperatures up to 200oC- Part-I: strength properties of dried wood after heat treatment", Holz als Roh-und Werkstoff, 31: 273-281, (1973)
  4. Korkut S., Akgul M. and Dundar T., "The effects of heat treatment on some technological properties of Scots pine (Pinus sylvestris L.) wood", Bioresource Technology, 99: 1861-1868, (2008) Korkut D.S. and Guller B., "The effects of heat treatment on physical properties and surface roughness of red-bud maple Technology, 99(8): 2846-51, (2008) wood", Bioresource Mitchell P.H., "Irreversible property changes of small loblolly pine specimens heated in air, nitrogen, or oxygen", Wood and Fiber Science, 20(3): 320-355, (1988) Jamsa S. and Viitaniemi P., "Heat treatment of wood better durability without chemicals. In: Rapp, A.O. (Ed.), Review on heat treatments of wood", Cost Action E22. Proceedings of the Special Seminar, Antibes, France, pp 17-22, (2001) Fengel D. and Wegener G., "Wood, chemistry, ultrastructure, reactions" Walter de Gruyter&Co, Germany, (1989) Srinivas K. and Pandey K.K., "Effect of heat treatment on color changes, dimensional stability, and mechanical properties of wood". Journal of Wood Chemistry and Technology, 32: 304-316, (2012)
  5. Yapıcı, F. and Ulucan D., "Prediction of modulus of rupture and modulus of elasticity of heat treated Anat