Dergiler / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 1

Laminar Forced Convection Over An Inclined Flat Plate With Unheated Starting Length

Sayfa
53–62
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is seen that Nusselt number increases with increasing Reynolds number and inclination angle of inclined flat plate but decreases with increasing the length of unheated region of plate.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Two-dimensional laminar forced convection over an inclined flat plate with an unheated starting length was investigated numerically for both constant surface temperature and constant heat flux boundary conditions.
📊
Temel Bulgular & Veri:The numerical study was implemented using the commercial software ANSYS Fluent 15.0.
💡
Sonuç & Katkı:It is seen that Nusselt number increases with increasing Reynolds number and inclination angle of inclined flat plate but decreases with increasing the length of unheated region of plate.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Laminar flow · forced convection · inclined flat plate

Özet

Two-dimensional laminar forced convection over an inclined flat plate with an unheated starting length was investigated numerically for both constant surface temperature and constant heat flux boundary conditions. The numerical study was implemented using the commercial software ANSYS Fluent 15.0. Air is used as working fluid. The influence of Reynolds number, inclination angle and the length of unheated plate on velocity and temperature distributions, surface temperature, surface heat flux and local Nusselt number was investigated. The results show that Reynolds number, inclination angle and the length of unheated region of plate play important role on heat transfer from the plate. It is seen that Nusselt number increases with increasing Reynolds number and inclination angle of inclined flat plate but decreases with increasing the length of unheated region of plate.

Abstract

Two-dimensional laminar forced convection over an inclined flat plate with an unheated starting length was investigated numerically for both constant surface temperature and constant heat flux boundary conditions. The numerical study was implemented using the commercial software ANSYS Fluent 15.0. Air is used as working fluid. The influence of Reynolds number, inclination angle and the length of unheated plate on velocity and temperature distributions, surface temperature, surface heat flux and local Nusselt number was investigated. The results show that Reynolds number, inclination angle and the length of unheated region of plate play important role on heat transfer from the plate. It is seen that Nusselt number increases with increasing Reynolds number and inclination angle of inclined flat plate but decreases with increasing the length of unheated region of plate.

🔖

Bu Makaleye Atıf Yap

TURGUT, O., ÖZCAN, A. C., TÜRKOĞLU, H. (2019). Laminar Forced Convection Over An Inclined Flat Plate With Unheated Starting Length. Politeknik Dergisi, Cilt: 22 - Sayı: 1, 53–62. https://ajindex.com/articles/306436

Kaynakça (13)

  1. Nagendra H. R., “Transient forced convection heat transfer from an isothermal flat plate”, AIAA Journal, 11: 876-878, (1973)
  2. Sarpkaya T., “An inviscid model of two-dimensional vortex shedding for transient and asymptotically steady separated flow over an inclined plate”, Journal of Fluid Mechanics, 68: 109-128, (1975)
  3. Dey J. and Nath G., “Forced convection heat transfer over a semi-infinite plate”, International Journal of Heat and Mass Transfer, 25: 1774-1776, (1982)
  4. Ma S. W., Gerner F. M. and Tsuei Y. G., “Composite expansions on forced convection over a flat plate with an unheated starting length”, International Journal of Heat and Mass Transfer, 35: 3275-3289, (1992)
  5. Ameel T. A., “Average effects of forced convection over a flat plate with an unheated starting length”, International Communications in Heat and Mass Transfer, 24: 1113-1120, (1997)
  6. Chamkha A. J., “Hydromagnetic Free convection flow over an inclined plate caused by solar radiation”, Journal of Thermophysics and Heat Transfer, 19: 312-314, (1997)
  7. Vynnycky M., Kimura S., Kanev K. and Pop I., “Forced convection heat transfer from a flat plate: The conjugate problem”, International Journal of Heat and Mass Transfer, 41: 45-59, (1998)
  8. Yovanovich M. M. and Teertstra P., “Laminar forced convection from isothermal rectangular plates from small to large Reynolds numbers”, American Institute of Aeronautics and Astronautics, AIAA-98-2675: 1-14, (1998)
  9. Umur H. and Karagöz I., “An investigation of external flows with various pressures and surfaces”, International Communications in Heat and Mass Transfer, 26: 411-419, (1999)
  10. Kondjoyan A., Péneau F. and Boisson H. C., “Effect of high free stream turbulence on heat transfer between plates and air flows: A review of existing experimental results”, International Journal of Thermal Sciences, 41: 1–16, (2002)
  11. Nan J., Yu-chun W., Whei S. and Zhen-dong W., “Experimental study of measurement for dissipation rate scaling exponent in heated wall turbulence”, Applied Mathematics and Mechanics, 23: 1035-1044, (2002)
  12. Kondjoyan A., Péneau F. and Boisson H. C., “Development of flat-plate thermal and velocity boundary layers under highly turbulent and instable air flows: Reynolds numbers ranging from 8400 to 127000”, International Journal of Thermal Sciences, 43: 1091–1100, (2004)
  13. Rebay M., Padet J. and Kakaç S., “Forced convection from a microstructure on a flat plate”, Heat and Mass Transfer, 43: 309-