Dergiler / Research on Engineering Structures and Materials / 2021 / Cilt: 7 - Sayı: 2

The effect of hemp fiber usage on the mechanical and physical properties of cement based mortars

Sayfa
245–258
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It has been determined that 1 or 2% fiber content is more suitable in the production of mortars.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:n this study, the impact of hemp fibers used in different lengths and ratios on the physical and mechanical properties of mortars has been examined.
📊
Temel Bulgular & Veri:Hemp fiber was used in the lengths of 0.5, 1 and 2 cm and was added to the mixtures in ratios of 1, 2 and 3%.
💡
Sonuç & Katkı:It has been determined that 1 or 2% fiber content is more suitable in the production of mortars.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

n this study, the impact of hemp fibers used in different lengths and ratios on the physical and mechanical properties of mortars has been examined. In this context, the flow diameters, dry unit weight, porosity, bending and compressive strength and capillarity properties of the mortars have been determined. Hemp fiber was used in the lengths of 0.5, 1 and 2 cm and was added to the mixtures in ratios of 1, 2 and 3%. The increase in fiber length and ratio decreased the flow diameter of the mortars and increased the porosity values. In the case of using 3% fiber, the dry unit weight values of the mortars fell below 2100 kg/m3. It is understood from the flexural strength results that the curing process is very important for the improvement of the fiber-matrix interface when hemp fiber is used. As a result, as the fiber ratio increased, the flexural strength increased in both 7 and 28 days. But the increase in fiber ratio decreased the 7 and 28 days compressive strength values. According to the capillary test results, it was observed that the optimum fiber ratio was 1%. As the fiber ratio increased, the capillarity coefficients of the mixtures also increased. Compressive strengths of 50 MPa and above were obtained in mixtures having 1% fiber with a capillarity coefficient of less than 0.10 mm/min0.5. As a result, it was determined that the most suitable fiber length is 1 cm. It has been determined that 1 or 2% fiber content is more suitable in the production of mortars.

🔖

Bu Makaleye Atıf Yap

KAPLAN, G., BAYRAKTAR, O. Y. (2021). The effect of hemp fiber usage on the mechanical and physical properties of cement based mortars. Research on Engineering Structures and Materials, Cilt: 7 - Sayı: 2, 245–258. https://ajindex.com/articles/306422

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Zhou X, Saini H, Kastiukas G. Engineering properties of treated natural hemp fiberreinforced concrete. Front Built Environ. 2017.
  2. Mehta PK, Monteiro PJM. Third Edition Prentice- Hall, Inc., Englewood Cliffs, NJ. Concrete: microstructure, properties, and materials. 2006
  3. Stevulova N, Cigasova J, Estokova A, Terpakova E, Geffert A, Kacik F, et al. Properties characterization of chemically modified hemp hurds. Materials (Basel). 2014.
  4. Ghalieh L, Awwad E, Saad G, Khatib H, Mabsout M. A Study on the Behavior of Concrete Columns Wrapped with Hemp Fabrics. Mag Concr Res. 2020 Sep;1-35.
  5. Bentur A, Mindess S. Fibre Reinforced Cementitious Composites. Fibre Reinforced Cementitious Composites. 2006.
  6. Li Z, Wang L, Wang X. Compressive and flexural properties of hemp fiber reinforced concrete. Fibers Polym. 2004.
  7. Ramadevi K, Deepa Shri S. Flexural behaviour of hemp fiber reinforced concrete beams. ARPN J Eng Appl Sci. 2015
  8. Rai A, Joshi YP. Applications and Properties of Fibre Reinforced Concrete. J Eng Res Appl www.ijera.com ISSN. 2014
  9. Pickering KL, Beckermann GW, Alam SN, Foreman NJ. Optimising industrial hemp fibre for composites. Compos Part A Appl Sci Manuf. 2007.
  10. Sedan D, Pagnoux C, Smith A, Chotard T. Mechanical properties of hemp fibre reinforced cement: Influence of the fibre/matrix interaction. J Eur Ceram Soc. 2008;
  11. Elfordy S, Lucas F, Tancret F, Scudeller Y, Goudet L. Mechanical and thermal properties of lime and hemp concrete ("hempcrete") manufactured by a projection process. Constr Build Mater. 2008.
  12. Ghalieh L, Awwad E, Saad G, Khatib H, Mabsout M. Concrete Columns Wrapped with Hemp Fiber Reinforced Polymer - An Experimental Study. In: Procedia Engineering. 2017.
  13. Siriluk S, Hussin Q, Rattanapitikorn W, Pimanmas A. Behaviours Of RC deep beams strengthened in shear using hemp fiber reinforced polymer composites. Int J GEOMATE. 2018.
  14. Çomak B, Bideci A, Salli Bideci Ö. Effects of hemp fibers on characteristics of cement based mortar. Constr Build Mater. 2018. https://doi.org/10.1016/j