Dergiler / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 2

Some Physical and Mechanical Properties of Impregnated Chestnut Wood with Natural and Chemical Agent Exposed to Outdoor Conditions

Sayfa
399–406
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result, it can be said that the physical and mechanical test values can compare wood impregnated with natural impregnation materials to wood impregnated with chemical impregnation materials after one year exposed to outdoor conditions.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Wood preservatives have been widely used to extend the service life of wood.
📊
Temel Bulgular & Veri:The most objectionable environment for wood is outdoor conditions.
💡
Sonuç & Katkı:As a result, it can be said that the physical and mechanical test values can compare wood impregnated with natural impregnation materials to wood impregnated with chemical impregnation materials after one year exposed to outdoor conditions.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Outdoor conditions · chestnut · pine tannin

Özet

Wood preservatives have been widely used to extend the service life of wood. The most objectionable environment for wood is outdoor conditions. In this study, test specimens prepared from chestnut wood (Castanea sativa Mill) were impregnated with natural and chemical impregnation agent. It was aimed to determine the effect of outdoor conditions on physical and mechanical properties of wood material by keeping them under these conditions for one year. As natural impregnation material pine tannin and acorn tannins, as chemical impregnation material imersol aqua and timbercare aqua were used. The retention amount, air-dried density, bending strength, modulus of elasticity, compression strength parallel to fibers, adhesion strength parallel to fibers, screw withdrawal strength were determined. As a result, it can be said that the physical and mechanical test values can compare wood impregnated with natural impregnation materials to wood impregnated with chemical impregnation materials after one year exposed to outdoor conditions.

Abstract

Wood preservatives have been widely used to extend the service life of wood. The most objectionable environment for wood is outdoor conditions. In this study, test specimens prepared from chestnut wood (Castanea sativa Mill) were impregnated with natural and chemical impregnation agent. It was aimed to determine the effect of outdoor conditions on physical and mechanical properties of wood material by keeping them under these conditions for one year. As natural impregnation material pine tannin and acorn tannins, as chemical impregnation material imersol aqua and timbercare aqua were used. The retention amount, air-dried density, bending strength, modulus of elasticity, compression strength parallel to fibers, adhesion strength parallel to fibers, screw withdrawal strength were determined. As a result, it can be said that the physical and mechanical test values can compare wood impregnated with natural impregnation materials to wood impregnated with chemical impregnation materials after one year exposed to outdoor conditions.

🔖

Bu Makaleye Atıf Yap

YAŞAR, M., ALTUNOK, M. (2019). Some Physical and Mechanical Properties of Impregnated Chestnut Wood with Natural and Chemical Agent Exposed to Outdoor Conditions. Politeknik Dergisi, Cilt: 22 - Sayı: 2, 399–406. https://ajindex.com/articles/306379

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Siró I., Plackett D., “Microfibrillated cellulose and new nanocomposite materials: a review”, Cellulose, 17: 459–94, (2010)
  2. Hon D, Shiraishi N., “Wood and cellulosic chemistry”, Markel Dekker Inc., USA. (2001)
  3. Komut, O., İmamoğlu, S. and Öztürk, A., “Blue stain degradation on the scots pine log and its effect on the sale prices” Artvin Coruh University Journal of Forestry Faculty, 14 (2): 283-291, (2013)
  4. Yasar S.S., Fidan M.S., Yasar M., Atar M. and Alkan E., “Influences of seasonal alterations on the burning characteristics of impregnated and surface treated chestnut (Castanea sativa mill ) wood”, Wood Research, 61(3): (2016)
  5. Keskin, H., Atar M. and Togay A., “Impacts of impregnation with Imersol-Aqua on the compression strength of some solid wood materials”, Construction and Building Materials, 22 (7): 1402-1408, (2008)
  6. Fidan M.S., Yasar S.S., Yasar M., Atar M. and Alkan, E., “Effect of seasonal changes on the combustion characteristics of impregnated cedar (Cedrus libani A. Rich.) wood”, Construction and Building Materials, 106: 711–720, (2016)
  7. Stamm A.S., “Wood and coating”, Wood and Cellulose Science, 120: 45-47, (1978)
  8. Komut, O., İmamoğlu, S. and Öztürk, A., “Damages and precautions that can be taken in the sales depots of forest enterprises”, 3rd National Black Sea Forestry Congress, I: 270-278, (2010)
  9. Matthias F., Joachim B.H., “Naturally grown round wood – ideas for an engineering design”, Materials And Joints In Timber Structures”, Springer, Netherlands, Dordrecht, 77–88, (2014)
  10. Ramagea M.H., Burridgeb H., Busse-Wicherc M., Feredaya G., Reynoldsa T., Shaha D.U., Wud G., Yuc L., Fleminga P., Densley-Tingleye D., Allwoode J., Dupreec P., Lindenb P.F., Scherman O., “The wood from the trees: The use of timber in construction”, Renewable and Sustainable Energy Reviews, 68: 333–359, (2017)
  11. Trada Technology, “Specifying timber species in marine and freshwater construction”, Technical report, TRADA, (2011)
  12. Callum, A.S.Hill, Wood modification: chemical, thermal and other processes. Chichester: Wiley; 2006
  13. Carvalho, A. J. F., “Starch: major sources, properties and applications as thermoplastic materials”, Monomers, polymers and composites from renewable resources, 321–342, Amsterdam, (2008)
  14. Tondi, G., Wieland, S., Wimmer, T., Thevenon, M. F., Pizzi, A. and Petutschnigg, A. “Tannin-boron preservatives for wood buildings: Mechanical and fire properties”, European Journal of Wood and Wo