Dergiler / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 2

Effects of Elevated Temperature for the Marble Cement Paste Products for Better Sustainable Construction

Sayfa
259–267
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Its seems that 300 0C was optimum temperature for hardened marble cement paste composites in that physical and mechanical properties above this level were adversely affected.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Marble has been effectively used as a building material since the early civilization.
📊
Temel Bulgular & Veri:For cementitious matrix subjected to high temperature, with the increase in temperature, physical and mechanical properties tend to decrease at macro-level, internal structures deteriorate, and micro-defects develop at micro and meso-levels.
💡
Sonuç & Katkı:Its seems that 300 0C was optimum temperature for hardened marble cement paste composites in that physical and mechanical properties above this level were adversely affected.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Marble · high temperature · strength

Özet

Marble has been effectively used as a building material since the early civilization. The construction sector needs to effectively utilize wastes that cause serious environmental problems around the world. Structure of cementitious composites can be classified into micro, meso, and macro levels. For cementitious matrix subjected to high temperature, with the increase in temperature, physical and mechanical properties tend to decrease at macro-level, internal structures deteriorate, and micro-defects develop at micro and meso-levels. Studying the physical and mechanical properties of cementitious matrix at elevated temperature helps us understand the mechanisms of such deterioration or reduction in both physical and mechanical properties. At elevated temperature, the compressive strength loss of hardened cement paste composites comprising 80% of marble dust was 81% at the end of 28-day curing period, and the reduction increased to 84% for the hardened cement paste composites comprising 60% of marble dust. Its seems that 300 0C was optimum temperature for hardened marble cement paste composites in that physical and mechanical properties above this level were adversely affected.

Abstract

Marble has been effectively used as a building material since the early civilization. The construction sector needs to effectively utilize wastes that cause serious environmental problems around the world. Structure of cementitious composites can be classified into micro, meso, and macro levels. For cementitious matrix subjected to high temperature, with the increase in temperature, physical and mechanical properties tend to decrease at macro-level, internal structures deteriorate, and micro-defects develop at micro and meso-levels. Studying the physical and mechanical properties of cementitious matrix at elevated temperature helps us understand the mechanisms of such deterioration or reduction in both physical and mechanical properties. At elevated temperature, the compressive strength loss of hardened cement paste composites comprising 80% of marble dust was 81% at the end of 28-day curing period, and the reduction increased to 84% for the hardened cement paste composites comprising 60% of marble dust. Its seems that 300 0C was optimum temperature for hardened marble cement paste composites in that physical and mechanical properties above this level were adversely affected.

🔖

Bu Makaleye Atıf Yap

AYDIN, E. (2019). Effects of Elevated Temperature for the Marble Cement Paste Products for Better Sustainable Construction. Politeknik Dergisi, Cilt: 22 - Sayı: 2, 259–267. https://ajindex.com/articles/306371

Kaynakça (14)

  1. Pietrosemoli L. and Monroy C.R., “The impact of sustainable construction and knowledge management on sustainability goals: A review of the Venezuelan renewable energy sector”, Renewable and Sustainable Energy Reviews, 27: 683-691, (2013)
  2. Asdrubali F., D'Alessandro F. and Schiavoni S., “A review of unconventional sustainable building insulation materials”, Sustainable Materials and Technologies, 4: 1-17, (2015)
  3. Li Y., Zhang X., Ding Q. and Feng Z., “Developing a quantitative construction waste estimation model for building construction projects”, Resources, Conservation and Recycling, 106: 9-20, (2016)
  4. Becchio C., Corgnati S.P., Kindinis A. and Pagliolico S., “Improving environmental sustainability of concrete products: Investigation on MWC thermal and mechanical properties”, Energy and Buildings, 41(11): 1127-1134, (2009)
  5. Ferrari G., Miyamoto M. and Ferrari A., “New sustainable technology for recycling returned concrete”, Construction and Building Materials, 67: 353-359, (2014)
  6. Aydin E. and Arel H.Ş., “Characterization of high-volume fly-ash cement pastes or sustainable construction applications”, Construction and Building Materials, 157: 96-107, (2017)
  7. Aydin E., “Staple wire-reinforced high-volume fly-ash cement paste composites”, Construction and Building Materials, 153: 393-401, (2017)
  8. Aydin E., “Novel Coal Bottom Ash Waste Composites for Sustainable Construction”, Construction and Building Materials, 124: 582-588, (2016)
  9. Arel H.Ş. and Aydin E., "Use of Industrial and Agricultural Wastes in Construction Concrete", ACI Materials Journal, 115 ( 1): 55-64, (2018)
  10. Kore S.D. and Vyas A.K., “Impact of marble waste as coarse aggregate on properties of lean cement concrete”, Case Studies in Construction Materials, 4: 85-92, (2016)
  11. Binici H., Kaplan H. and Yilmaz S., “Influence of marble and lime stone dusts as additives on some mechanical properties of concrete”, Scientific Research and Essay, 2 (9): 372-379, (2007)
  12. Keleştemur O., Yildiz S., Gökçer B. and Arici E., “Statistical analysis for freeze-thaw resistance of cement mortars containing marble dust and glass fiber”, Materials and Design, 60: 548-555, (2014
  13. Topçu İ.B., Bilir T. and Uygunoğlu T., “Effect of waste marble dust content as filler on properties of self-compacting concrete”, Construction and Building Materials, 23: 1947-1953, (2009)
  14. Gesoğlu M., Güneyisi E., Kocabağ M.E., Bayram V. and Mermerdaş K., “Fresh and hardened charac