Dergiler / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 2

Diffusion Welding of Al-α-Si3N4 Composite Materials

Sayfa
497–503
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Results indicated that optimum parameters (welding temperatures, durations and amount of α-Si3N4 are 640°C, 2 h., and 15wt % respectively) MMCs produced in this study could be joined by diffusion welding technique successfully with the 97.5 % strength of base material.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:ABSTRACT In this study, Al-a-Si3N4 composite, produced by powder metallurgy method, were joined at 2.5 MPa pressure with various welding temperatures (620, 630, and 640 °C ) and durations (1,1.5, and 2 h.) by diffusion welding method.
📊
Temel Bulgular & Veri:Optical microscopy examination was carried out from welded interfaces and shear tests were also conducted to the sample interfaces to find out the effect of welding parameters and amount of α-Si3N4 reinforcement on the weldability properties of composite materials.
💡
Sonuç & Katkı:Results indicated that optimum parameters (welding temperatures, durations and amount of α-Si3N4 are 640°C, 2 h., and 15wt % respectively) MMCs produced in this study could be joined by diffusion welding technique successfully with the 97.5 % strength of base material.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Composite · Al-Si3N4 · Diffusion welding

Özet

ABSTRACT In this study, Al-a-Si3N4 composite, produced by powder metallurgy method, were joined at 2.5 MPa pressure with various welding temperatures (620, 630, and 640 °C ) and durations (1,1.5, and 2 h.) by diffusion welding method. Optical microscopy examination was carried out from welded interfaces and shear tests were also conducted to the sample interfaces to find out the effect of welding parameters and amount of α-Si3N4 reinforcement on the weldability properties of composite materials. The test results show that increase in the welding temperature and duration resulted in increase shear resistance of the welded zone. Results indicated that optimum parameters (welding temperatures, durations and amount of α-Si3N4 are 640°C, 2 h., and 15wt % respectively) MMCs produced in this study could be joined by diffusion welding technique successfully with the 97.5 % strength of base material.

Abstract

ABSTRACT In this study, Al-a-Si3N4 composite, produced by powder metallurgy method, were joined at 2.5 MPa pressure with various welding temperatures (620, 630, and 640 °C ) and durations (1,1.5, and 2 h.) by diffusion welding method. Optical microscopy examination was carried out from welded interfaces and shear tests were also conducted to the sample interfaces to find out the effect of welding parameters and amount of α-Si3N4 reinforcement on the weldability properties of composite materials. The test results show that increase in the welding temperature and duration resulted in increase shear resistance of the welded zone. Results indicated that optimum parameters (welding temperatures, durations and amount of α-Si3N4 are 640°C, 2 h., and 15wt % respectively) MMCs produced in this study could be joined by diffusion welding technique successfully with the 97.5 % strength of base material.

🔖

Bu Makaleye Atıf Yap

ARIK, H., ERDEN, İ. O., AYDIN, M. (2020). Diffusion Welding of Al-α-Si3N4 Composite Materials. Politeknik Dergisi, Cilt: 23 - Sayı: 2, 497–503. https://ajindex.com/articles/306294

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. REFERENCES[1] Ozan S., Karaoglu S., Ipek R., “Examination of diffusion welding capabilities of particle-reinforced aluminum-based metal matrix composites”, Engineer and Machine, 53: 45-53, (2012).[2] Arık H., Sandal R., “Investigation regarding Al-Al2O3 composite material production and its weldability to aluminium by diffusion welding”, GU J Sci, Part A, 4 (4): 101-111, (2017).[3] Arik H., “Production and characterization of in situ Al4C3 reinforced aluminium-based composite produced by mechanical alloying technique”, Materials & Design, 25: 31- 40, (2004).[4] Mahajan G. V., Aher V. S., “Composite material: A review over current development and automotive application”, International Journal of Scientific and Research Publications, 2 (11): 1-5, (2012).[5] Mollaoglu Altuner H., “Diffusion bonding of particle reinforced aluminum–based metal matrix composites”, Phd. Thesis, Yildiz Technical University, Institute of Sciences, (2011). [6] Akbulut H., “Production and investigation of microstructure-properties of Al2O3 fibrous reinforced Al-Si based composite”, Phd. Thesis, Istanbul Technical University, Institute of Science and Technology, (1994).[7] Ben R. C., Mirchandani P. K., “New materials by mechanical alloying techniques”, Editors: Arzt E, and Schultz C, Colw-Hirson (FRG) 1988.[8] Zhang X. P., Ye L., Mai W., “Investigation on diffusion bonding characteristics of SiC particulate reinforced aluminum metal matrix composites”, Composites Applied Science and Manufacturing Part A, 30: 1415-1421, (1999).[9] Arık H., Turker M, Saritas S., “Investigation of mechanical properties of in situ Al4C3 reinforced aluminium based composites by mechanical alloying technique”, Powder Metallurgy World Congress and Exhibition, Kyoto, 543-549, (2000).[10] Singer R. F., Oliver W. C., Nix W. D., “Identification of dispersoid phases created in aluminum during mechanical alloying”, Metallurgical Transactions A, 11A: 1895-1901, (1980).[11] Ellis B. D., “Joining of aluminum based metal matrix composites”, International Materials Reviews, 41: 41-58, (1996).[12] Zhang X. P., Quan G. F., Wei W., “Preliminary investigation on joining performance of SiCp reinforced aluminum metal matrix composite (Al/SiC-MMC) by vacuum brazing”, Composites, Applied Science and Manufacturing Part A, 30: 823-827, (1999).[13] Huang Y., Ridley N., Humphreys F. J., “Diffusion bonding of superplastic 7075 aluminium alloy”, Materials Science And Engineering A, 266: 295-302, (1999).[14] Dunkerton S. B., “Diffusi