Dergiler / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 2

Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky)

Sayfa
655–662
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Rosin, in terms of its combustion performance, can be preferred in impregnation with boron compounds depending on kind of wood and using area.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, investigation of the combustion properties of Oriental beech wood (Fagus orientalis Lipsky) impregnated with boron compound (borax (Na2B4O710H2O), boric acid (H3BO3) doped rosin (C19H29COOH) was aimed.
📊
Temel Bulgular & Veri:For this purpose, Oriental beech wood samples were prepared according to ASTM E 160-50 and impregnated with boron compound doped rosin by the method of medium-term dipping (24 hours) according to ASTM D 1413 and producers’ definition.
💡
Sonuç & Katkı:Rosin, in terms of its combustion performance, can be preferred in impregnation with boron compounds depending on kind of wood and using area.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Combustion · impregnation · Rosin

Özet

In this study, investigation of the combustion properties of Oriental beech wood (Fagus orientalis Lipsky) impregnated with boron compound (borax (Na2B4O710H2O), boric acid (H3BO3) doped rosin (C19H29COOH) was aimed. For this purpose, Oriental beech wood samples were prepared according to ASTM E 160-50 and impregnated with boron compound doped rosin by the method of medium-term dipping (24 hours) according to ASTM D 1413 and producers’ definition. Combustion properties of samples after impregnated process were determined according to ASTM E 160-50. As a part of the research, 6 different combination and contents of impregnation materials have been used in order to especially investigate resistance against combustion of wood material treated with boron compounds in different concentrations. As a result of the study, retention performance and leaching resistance of boron compounds can be increased through rosin addition. Consequently, impregnation materials with rosin decreased the flame sourced combustion (Fsc) temperatures depending on kind of impregnation material, extended combustion period and decreased weight loss ratio of the test samples in comparison to the control samples. On the contrary, weight loss ratios were affected negatively in Oriental beech test samples up to 3% when compared with samples which were impregnated with borax. Meanwhile, combustion periods increased in test samples up to 30%. Rosin, in terms of its combustion performance, can be preferred in impregnation with boron compounds depending on kind of wood and using area.

Abstract

In this study, investigation of the combustion properties of Oriental beech wood (Fagus orientalis Lipsky) impregnated with boron compound (borax (Na2B4O710H2O), boric acid (H3BO3) doped rosin (C19H29COOH) was aimed. For this purpose, Oriental beech wood samples were prepared according to ASTM E 160-50 and impregnated with boron compound doped rosin by the method of medium-term dipping (24 hours) according to ASTM D 1413 and producers’ definition. Combustion properties of samples after impregnated process were determined according to ASTM E 160-50. As a part of the research, 6 different combination and contents of impregnation materials have been used in order to especially investigate resistance against combustion of wood material treated with boron compounds in different concentrations. As a result of the study, retention performance and leaching resistance of boron compounds can be increased through rosin addition. Consequently, impregnation materials with rosin decreased the flame sourced combustion (Fsc) temperatures depending on kind of impregnation material, extended combustion period and decreased weight loss ratio of the test samples in comparison to the control samples. On the contrary, weight loss ratios were affected negatively in Oriental beech test samples up to 3% when compared with samples which were impregnated with borax. Meanwhile, combustion periods increased in test samples up to 30%. Rosin, in terms of its combustion performance, can be preferred in impregnation with boron compounds depending on kind of wood and using area.

🔖

Bu Makaleye Atıf Yap

AŞÇI, T., KESKİN, H. (2021). Effect of Impregnation with Boron Compound Doped Rosin to the Combustion Resistance of Oriental Beech Wood (Fagus orientalis Lipsky). Politeknik Dergisi, Cilt: 24 - Sayı: 2, 655–662. https://ajindex.com/articles/306233

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. Ors, Y. and Keskin, H., “Wood material technology,” Gazi Publishing, Ankara, 141-151. (2008)
  2. Kartal,S.N., Imamura, Y., “Usage of boron compound as impregnation materials in wood and composites”. 3rd International Boron Symposium, 333, Eskişehir, (2004)
  3. Baysal E., Sönmez A., Çolak M., Toker H., “Amount of leachant and water absorption levels of wood treated with borates and water repellents.” Bioresource Technology 97: 2271-2279, (2006)
  4. Baysal E., “Fire features of Scots pine wood impregnated with boron compounds and natural tanning materials”. Erciyes University, Journal of Applied Science Institute, 59-61, (2003)
  5. Obanda, D., Shupe, T. and Barnes, H.M., “Reducing leaching of boron-based wood preservatives – A review of research,” Bioresource Technology 99, 7312–7322, (2008)
  6. Mohareb, A., “Development of leach-resistant boron compounds for wood protectıon ın exterior applications in Egypt.” Ph.D. Thesis, Gent University, (2005
  7. Lesar, B., Kralj, P., Humar, M., “Montan wax improves performance of boron-based wood preservatives”, International Biodeterioration& Biodegradation, 63; 306–310, (2009)
  8. Örs, Y. and Keskin, H., “Wood Material Instruction” Gazi University Publish No:. 2000/352, Atlas Publishing, İstanbul, Turkey (2001)
  9. Örs, Y., Atar, M., Peker, H., “The impact of different impregnation and surface treatment materials on combustion properties of Scots Pine and Chestnut trees.” Journal of Agriculture and Forestry, 541, (1999)
  10. Temiz, A., Gezer E.D., Yıldız, U.C. and Yıldız, S., “Combustion properties of alder (Alnusglutinosa L.) Gaertn. subsp. barbata (C.A. Mey) Yalt.) and southern pine (Pinus sylvestris L.) wood treated with boron compounds,” Construction and Building Materials 22, 2165–2169, (2008)
  11. Uysal, B., “The impacts of various chemical materials on combustion resistance of wood material,” Ph.D. Thesis, Gazi University Institute of Applied Sci., Ankara, 96-99, (1997)
  12. Uysal, B., Kurt, Ş., “Combustion properties of Oriental Beech and Scots Pine wood impregnated withboron compounds”,I. National Boron Workshop Papers Handbook, 33-41, (2005)
  13. Uysal, B., Kurt. Ş., Esen, R., Özcan, C., Yıldırım, M. N., Kılınç, İ., “The impact on combustion resistance of surface treatments applied to the Sapele wood impregnated with some chemicals” 6th International Advanced Technologies Symposium, 267-275, (2011)
  14. Giachi, G., Capretti, C., Donato I., Macchioni, N. and Pizzo B., “New trials in the conso