Dergiler / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 2

Effect of SiC Particle Size on the Microstructural, Mechanical and Oxidation Properties of In-situ Synthesized HfB2-SiC Composites

Sayfa
503–510
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In-situ synthesis and densification of hafnium diboride - silicon carbide (HfB2-SiC) ceramic composites were studied by the spark plasma sintering (SPS) method using HfO2, B, and SiC as starting powders.
📊
Temel Bulgular & Veri:Influence of SiC particle size (∼2 µm and ∼10 µm) on mechanical properties and oxidation resistance of in-situ composites were extensively investigated.
💡
Sonuç & Katkı:From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Ultra high temperature ceramics · HfB2-SiC · in-situ synthesis

Özet

In-situ synthesis and densification of hafnium diboride - silicon carbide (HfB2-SiC) ceramic composites were studied by the spark plasma sintering (SPS) method using HfO2, B, and SiC as starting powders. Influence of SiC particle size (∼2 µm and ∼10 µm) on mechanical properties and oxidation resistance of in-situ composites were extensively investigated. According to the achieved results, the highest densification (∼95 % TD) was obtained with fine SiC particle reinforcement. The measured Vickers hardness and fracture toughness of the composites containing fine SiC were 14.3 GPa and 5.42 MPa.m1/2, respectively. The fracture mode changed from transgranular cleavage to a mixed-mode, and the crack deflection was believed to be the primary toughening mechanism. From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.

Abstract

In-situ synthesis and densification of hafnium diboride - silicon carbide (HfB2-SiC) ceramic composites were studied by the spark plasma sintering (SPS) method using HfO2, B, and SiC as starting powders. Influence of SiC particle size (∼2 µm and ∼10 µm) on mechanical properties and oxidation resistance of in-situ composites were extensively investigated. According to the achieved results, the highest densification (∼95 % TD) was obtained with fine SiC particle reinforcement. The measured Vickers hardness and fracture toughness of the composites containing fine SiC were 14.3 GPa and 5.42 MPa.m1/2, respectively. The fracture mode changed from transgranular cleavage to a mixed-mode, and the crack deflection was believed to be the primary toughening mechanism. From oxidation test result, the composite with fine SiC particles exhibited more inhomogeneous oxide scales compared to that of coarse SiC containing composite.

🔖

Bu Makaleye Atıf Yap

GÜRCAN, K., DERİN, B., AYAS, E. (2021). Effect of SiC Particle Size on the Microstructural, Mechanical and Oxidation Properties of In-situ Synthesized HfB2-SiC Composites. Politeknik Dergisi, Cilt: 24 - Sayı: 2, 503–510. https://ajindex.com/articles/306230

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. R Levine S., Opila E., Halbig M., D Kiser J., Singh M., Salem A.”Evaluation of Ultra-High Temperature Ceramics for Aero Propulsion Use”, Journal of the European Ceramic Society, 22: 2757-2767, (2002
  2. Fahrenholtz W.G., Hilmas G.E., Talmy I.G., Zaykoski J.A.”Refractory Diborides of Zirconium and Hafnium”, Journal of the American Ceramic Society, 90: 1347-1364, (2007
  3. Akin I., Goller G., “Spark Plasma Sintering of Zirconia-Toughened Alumina Composites and Ultra-High Temperature Ceramics Reinforced with Carbon Nanotubes”, Research and Innovation in Carbon Nanotube-Based Composites, 2015
  4. Ni D.-W., Zhang G.-J., Kan Y.-M., Wang P.-L.”Synthesis of Monodispersed Fine Hafnium Diboride Powders Using Carbo/Borothermal Reduction of Hafnium Dioxide”, Journal of the American Ceramic Society, 91: 2709-2712, (2008
  5. Wang H., Lee S.H., Kim H.D., Oh H.C.”Synthesis of Ultrafine Hafnium Diboride Powders Using Solution-Based Processing and Spark Plasma Sintering”, International Journal of Applied Ceramic Technology, 11: (2014
  6. Brochu M., Gauntt B., Zimmerly T., Ayala A., Loehman R.”Fabrication of UHTCs by Conversion of Dynamically Consolidated Zr+B and Hf+B Powder Mixtures”, Journal of the American Ceramic Society, 91: 2815-2822, (2008
  7. Ni D.-W., Zhang G.-J., Kan Y.-M., Wang P.-L.”Hot Pressed HfB2 and HfB2–20vol%SiC Ceramics Based on HfB2 Powder Synthesized by Borothermal Reduction of HfO2*”, International Journal of Applied Ceramic Technology, 7: 830-836, (2010
  8. Blum Y.D., Marschall J., Hui D., Adair B., Vestel M.”Hafnium Reactivity with Boron and Carbon Sources Under Non-Self-Propagating High-Temperature Synthesis Conditions”, Journal of the American Ceramic Society, 91: 1481-1488, (2008
  9. Zou J., Zhang G.-J., Kan Y.-M., Ohji T.”Pressureless sintering mechanisms and mechanical properties of hafnium diboride ceramics with pre-sintering heat treatment”, Scripta Materialia, 62: 159-162, (2010
  10. Parthasarathy T.A., Rapp R.A., Opeka M., Kerans R.J.”A model for the oxidation of ZrB2, HfB2 and TiB2”, Acta Materialia, 55: 5999-6010, (2007
  11. Monteverde F., Bellosi A.”The resistance to oxidation of an HfB2–SiC composite”, Journal of the European Ceramic Society, 25: 1025-1031, (2005
  12. Monteverde F.”Ultra-high temperature HfB2–SiC ceramics consolidated by hot-pressing and spark plasma sintering”, Journal of Alloys and Compounds, 428: 197-205, (2007
  13. Fahrenholtz W.G.”Thermodynamic Analysis of ZrB2–SiC Oxidation: Formation of a SiC-Deple