Due to the importance of accelerating the rate of production from approximately 180-240 minutes to a few minutes, in this study, the weldability of the carbon fiber reinforced thermoplastic composites was investigated.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:Because of their exceptional features,advanced composites with polymer matrix attract increasing interest in engineering applications recently.
📊
Temel Bulgular & Veri:Compared to their weight ratio due to the high endurance and hardness values applications of polymer matrixed composites of lightweight, low density,and high performance are popular in military and civil aerospace, automotive, wind power and many other industries.
💡
Sonuç & Katkı:Due to the importance of accelerating the rate of production from approximately 180-240 minutes to a few minutes, in this study, the weldability of the carbon fiber reinforced thermoplastic composites was investigated.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Özet
Because of their exceptional features,advanced composites with polymer matrix attract increasing interest in engineering applications recently. Compared to their weight ratio due to the high endurance and hardness values applications of polymer matrixed composites of lightweight, low density,and high performance are popular in military and civil aerospace, automotive, wind power and many other industries. Nowadays, induction heating of the carbon fiber reinforced thermoplastic composites is one of the most important worldwide studies. Due to the importance of accelerating the rate of production from approximately 180-240 minutes to a few minutes, in this study, the weldability of the carbon fiber reinforced thermoplastic composites was investigated.
🔖
Bu Makaleye Atıf Yap
ÇAVDAR, U., OLGUN, Ö. (2020). Effects of ultra-highfrequency induction system on the carbon fiber reinforced thermoplastic composites. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 1, 75–84. https://ajindex.com/articles/302680
Aran A. Elyaf takviyeli karma malzemeler, İTÜ: İstanbul, Turkey 1990: 8-9
Callister WDJr, Rethwisch DG. Malzeme Bilimi ve Mühendisliği, 8th ed.; Wiley: New York, 2011: 648-650
Vieille B, Chabchoub, M. Bouscarrat, D., Gautrelet, C. A fracture mechanics approach using Acoustic Emission Technique to investigate damage evolution in woven-ply thermoplastic structures at temperatures higherthan glass transition temperature, Composites Part B. 2016; 116: 340-351.
Vieille B, Casado VM, Bouvet C. About the impact behavior ofwoven-ply carbon fiber-reinforced thermoplastic -and thermosetting -composites: a comparative study, Compos Struct. 2013; 101: 9-21.
Vieille B, Casado VM, Bouvet C. Influence of matrix toughness and ductility on the compression after-impact behavior of woven-ply thermoplastic-and thermosetting composites: a comparative study, Compos Struct. 2014; 110: 207-218.
Vieille B, Aucher J, Taleb L. About the influence of temperature and matrix ductility on the behaviour of carbon woven-ply PPS or epoxy laminates: notched and unnotched laminates, Comp Sc Tech. 2011; 71: 998-1007.
Vieille B, Albouy W. Fatigue damage accumulation in notched woven-ply thermoplastic and thermoset laminates at high-temperature: influence of matrix ductility and fatigue life prediction, Int. J. Fatigue. 2015; 80: 1-9.
Bayerl T, Duhovic M, Mitschang P, Bhattacharyya D. The heating of polymer composites by electromagnetic induction -A review, Composites: Part A. 2014, 57: 27-40.
Bensaid S, Trichet D, Fouladgar J. 3-D simulation of induction heating of anisotropic composite materials, IEEE Trans. Magn. 2005; 41(5): 1568-1571.
Bensaid S, Trichet, D, Fouladgar J. Electromagnetic and thermal behaviours of multilayer anisotropic composite materials, IEEE Trans. Magn. 2006; 42(4): 995-998.
Menana H, Féliachi M. 3-D eddy current computation in carbon-fibre reinforced composites, IEEE Trans. Magn. 2009; 45(3): 1008-1011.
Ramdane B, Trichet D, Belkadi M, Saidi T, Fouladgar J. Electromagnetic and thermal modelling of composit