Dergiler / Research on Engineering Structures and Materials / 2017 / Cilt: 3 - Sayı: 2

Probability of failure determination for tunnels in rock by using Monte Carlo simulation

Sayfa
135–146
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is concluded that in cases when the distribution for the performance factor is not fully known, Monte Carlo analysis may give better results.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Convergence - confinement method can be used to analyze rock support systems in interaction with rock mass in order to select the appropriate supports system for tunnels in rock.
📊
Temel Bulgular & Veri:There are many uncertainties in parameters used to calculate the factor of safety, and these uncertainties are not integrated in a deterministic analysis, but can be taken into account using a reliability analysis.
💡
Sonuç & Katkı:It is concluded that in cases when the distribution for the performance factor is not fully known, Monte Carlo analysis may give better results.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Convergence - confinement method can be used to analyze rock support systems in interaction with rock mass in order to select the appropriate supports system for tunnels in rock. This method enables calculation of the charge applied to the support system and the factor of safety for the tunnel supports. The factor of safety calculated from traditional deterministic analysis methods cannot fully represent tunnel stability. There are many uncertainties in parameters used to calculate the factor of safety, and these uncertainties are not integrated in a deterministic analysis, but can be taken into account using a reliability analysis. Reliability analyses, used to calculate probability of failure for tunnel support system, is a complement of the factor of safety calculated by using deterministic analyses. In this paper, Monte Carlo Simulation is used to calculate probability of failure for tunnel support system. This article shows that significant error may be introduced by accepting a distribution for the performance function, which is obligatory for methods like FOSM, FORM, PEM. It is concluded that in cases when the distribution for the performance factor is not fully known, Monte Carlo analysis may give better results.

🔖

Bu Makaleye Atıf Yap

BUKAÇİ, E., KORİNİ, T., PERİKU, E., ALLKJA, S., SHEPERİ, P. (2017). Probability of failure determination for tunnels in rock by using Monte Carlo simulation. Research on Engineering Structures and Materials, Cilt: 3 - Sayı: 2, 135–146. https://ajindex.com/articles/302669

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (6)

  1. Gesta P., Kerisel,J., Londe P., Louis C., Panet M., Duddeck H., Daemen J. Stabilite des tunnels par la methode convergence-confinement-Journee D'etudes-Paris, 1979; 11: 17-24.
  2. Fairhurst C, Carranza-Torres C. Closing the circle, some comments on design procedures for tunnel supports in rock. 50th Annual Geotechnical Conference, Minnesota, 2002.
  3. Hoek E., Carranza-Torres C., Corkum B. Hoek-Brown failure criterion-2002 edition. Proceedings of NARMS-Tac, 1, 267-273. Barla M.: Elementi di meccanica e ingegneria delle rocce, Celid, Italy, 2011. Sakurai S. Displacement measurements associated with the design of underground openings. Proc. Int. Symp. Field Measurements in Geomechanics, Zurich, 1983; 2:11631178. Vlachopoulos N., Diederichs M. S. Improved longitudinal displacement profiles for convergence confinement analysis of deep tunnels. Rock Mech Rock Engng, 2009;42: 131–146. http://dx.doi.org/10.1007/s00603-009-0176-4
  4. Baecher GB, Christian JT. Reliability and statistics in geotechnical engineering. John Wiley & Sons Ltd, England, 2003.
  5. Marinos P, Hoek E. Estimating the geotechnical properties of heterogeneous rock masses such as flysch. Bulletin of the Engineering Geology and the Environment, 2001; 60: 85-92. http://dx.doi.org/10.1007/s100640000090
  6. Driels MR, Shin, YS. Determining the number of iterations for Monte Carlo simulations of weapon effectiveness. Naval Postgraduate School, Monterey, CA, 2004. Byrne MD. How Many Times Should a Stochastic Model Be Run? An Approach Based on Confidence Intervals. 12th International Conference on Cognitive Modeling, Canada, 445-450, 2013.