Dergiler / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 3

Carbon black reinforced natural rubber/butadiene rubber and natural rubber/butadiene rubber/styrene-butadiene rubber composites: Part I: Rheological, mechanical and thermomechanical properties

Sayfa
233–247
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Here, these results clearly show that blending carbon black reinforced NR or NR/SBR composites with BR having different degrees of viscosity is quite favorable in terms of using these NR composites as antivibrational rubber bushings in automotive applications.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Carbon black reinforced natural rubber (NR)/butadiene rubber (BR), NR/styrene-butadiene rubber (SBR) and NR/BR/SBR composites were prepared by using two types of BR with highly linear (higher viscosity and molecular weight) and branched chain structures.
📊
Temel Bulgular & Veri:Also, the addition of BR to NR decreases the tan  value and leads to lowest values of tan  in NR/BR composites.
💡
Sonuç & Katkı:Here, these results clearly show that blending carbon black reinforced NR or NR/SBR composites with BR having different degrees of viscosity is quite favorable in terms of using these NR composites as antivibrational rubber bushings in automotive applications.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Carbon black reinforced natural rubber (NR)/butadiene rubber (BR), NR/styrene-butadiene rubber (SBR) and NR/BR/SBR composites were prepared by using two types of BR with highly linear (higher viscosity and molecular weight) and branched chain structures. In NR/BR composite with a higher viscosity BR, the presence of both polysulphidic and monosulphidic types of crosslinking was confirmed based on FT-IR data. NR/BR composite consisting of BR with higher viscosity has the lowest Payne effect and compression set values. NR/BR/SBR composites have much lower Payne effect values compared to NR/SBR system. Also, the addition of BR to NR decreases the tan  value and leads to lowest values of tan  in NR/BR composites. Tensile strength and elongation at break values in NR/BR/SBR composites are improved with the addition of BR with a lower viscosity. In comparison with NR/SBR, NR/BR/SBR composites exhibit much less compression set and stress relaxation values because NR/SBR composite exhibits more permanent deformation due to its more rigid styrene content. Here, these results clearly show that blending carbon black reinforced NR or NR/SBR composites with BR having different degrees of viscosity is quite favorable in terms of using these NR composites as antivibrational rubber bushings in automotive applications.

🔖

Bu Makaleye Atıf Yap

BURGAZ, E., GENCOGLU, O., GOKSUZOGLU, M. (2019). Carbon black reinforced natural rubber/butadiene rubber and natural rubber/butadiene rubber/styrene-butadiene rubber composites: Part I: Rheological, mechanical and thermomechanical properties. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 3, 233–247. https://ajindex.com/articles/302651

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. Legorju-jago K, Bathias C. Fatigue initiation and propagation in natural and synthetic rubbers. Int J Fatigue. 2002;24:85-92. https://doi.org/10.1016/S0142- 1123(01)00062-7 [2] Creton C, Ciccotti M. Fracture and adhesion of soft materials: a review. Rep Prog Phys. 2016;79:046601. https://doi.org/10.1088/0034-4885/79/4/046601 [3] Mars WV, Fatemi A. Factors that affect the fatigue life of rubber: A literature survey. Rubber Chem Technol. 2004;77:391-412. https://doi.org/10.5254/1.3547831 [4] Tee YL, Loo MS, Andriyana A. Recent advances on fatigue of rubber after the literature survey by Mars and Fatemi in 2002 and 2004. Int J Fatigue. 2018;110:115-129. https://doi.org/10.1016/j.ijfatigue.2018.01.007 [5] Findik F, Yilmaz R, Koksal T. Investigation of mechanical and physical properties of several industrial rubbers. Mater Design. 2004;25:269-276. https://doi.org/10.1016/j.matdes.2003.11.003 [6] Tangudom P, Thongsang S, Sombatsompop N. Cure and mechanical properties and abrasive wear behavior of natural rubber, styrene-butadiene rubber and their blends reinforced with silica hybrid fillers. Mater Design. 2014;53:856-864. https://doi.org/10.1016/j.matdes.2013.07.024 [7] Poompradub S, Tosaka M, Kohjiya S, Ikeda Y, Toki S, Sics I, et al. Mechanism of straininduced crystallization in filled and unfilled natural rubber vulcanizates. J Appl Phys. 2005;97:103529. https://doi.org/10.1063/1.1900927 [8] Toki S, Fujimaki T, Okuyama M. Strain-induced crystallization of natural rubber as detected real-time by wide-angle X-ray diffraction technique. Polymer. 2000;41:5423- 5429. https://doi.org/10.1016/S0032-3861(99)00724-7 [9] Huneau B. Strain-Induced Crystallization of Natural Rubber: A Review of X-Ray Diffraction Investigations. Rubber Chem Technol. 2011;84:425-452. https://doi.org/10.5254/1.3601131 [10] Le Cam JB, Toussaint E. The Mechanism of Fatigue Crack Growth in Rubbers under Severe Loading: The Effect of Stress-Induced Crystallization. Macromolecules. 2010;43:4708-4714. https://doi.org/10.1021/ma100042n [11] Mars WV, Fatemi A. Multiaxial stress effects on fatigue behavior of filled natural rubber. Int J Fatigue. 2006;28:521-529. https://doi.org/10.1016/j.ijfatigue.2005.07.040 [12] George SC, Ninan KN, Groeninickx G, Thomas S. Styrene-butadiene rubber/natural rubber blends: Morphology, transport behavior, and dynamic mechanical and mechanical properties. J Appl Polym Sci. 2000;78:1280-1303. https://doi.org/10.1002/1097-4628(20001107)78:6 3.0.CO;2- [13] Varkey JT,