Dergiler / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 3

An investigation on the mechanical strength, impact resistance and hardness of SiC filled natural jute fiber reinforced composites

Sayfa
213–231
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The test results showed that the SiC particle size and the percentage of reinforcement were effective on the mechanical behavior of the composite material.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Natural fibers are a good alternative as economically since they are readily available in fibrous form and can be extracted from plant leaves at very low costs.
📊
Temel Bulgular & Veri:In this respect, many studies have been carried out by researchers to increase the strength of natural fibers.
💡
Sonuç & Katkı:The test results showed that the SiC particle size and the percentage of reinforcement were effective on the mechanical behavior of the composite material.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Natural fibers are a good alternative as economically since they are readily available in fibrous form and can be extracted from plant leaves at very low costs. However, they have lower strength values than synthetic fibers due to their deficiencies in material structure. In this respect, many studies have been carried out by researchers to increase the strength of natural fibers. In this study, mechanical properties, Izod impact toughness, and Shore D hardness behavior of silicon carbide (SiC) filled natural fiber reinforced laminated composites were investigated. In this context, natural jute/epoxy laminated composites were reinforced in different ratios (3%, 6%, and 9%) with SiC powders having different grain size (4.5μ, 9.3μ and 53μ). The test results were compared with the results of unfilled jute/epoxy composites in order to better understand the effects of the fill percentage and grain size on mechanical strength. The produced laminated composites were tested under tensile, compression and impact loads. Scanning Electron Microscopy (SEM) was also performed to analyze the mechanisms of damage of the specimens. The test results showed that the SiC particle size and the percentage of reinforcement were effective on the mechanical behavior of the composite material.

🔖

Bu Makaleye Atıf Yap

BALCIOĞLU, H. E. (2019). An investigation on the mechanical strength, impact resistance and hardness of SiC filled natural jute fiber reinforced composites. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 3, 213–231. https://ajindex.com/articles/302650

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Balcıoğlu HE, Sakin R, Gün H. The design of multi-sample flexural fatigue device and fatigue behavior of glass/epoxy laminated composites. Res Eng Struct Mater 2018;4:279-96.
  2. Kaybal HB, Ulus H, Tatar AC, Demir O, Avcı A. Influence of seawater on mechanical properties of SiO2-epoxy polymer nanocomposites. Res Eng Struct Mater 2019;5:147- 54.
  3. Sarikaya E, Çallioğlu H, Demirel H. Production of epoxy composites reinforced by different natural fibers and their mechanical properties. Compos Part B Eng 2019;167:461-6.
  4. Chegdani F, Wang Z, El Mansori M, Bukkapatnam STS. Multiscale tribo-mechanical analysis of natural fiber composites for manufacturing applications. Tribol Int 2018;122:143-50.
  5. Shahinur S, Hasan M. Natural Fiber and Synthetic Fiber Composites: Comparison of Properties, Performance, Cost and Environmental Benefits. Elsevier Ltd.; 2019.
  6. Karabulut N, Aktaş M, Balcıoğlu HE. Surface Modification Effects on the Mechanical Properties of Woven Jute Fabric Reinforced Laminated Composites. J Nat Fibers 2018;00:1-15
  7. Yan L, Chouw N, Yuan X. Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment. J Reinf Plast Compos 2012;31:425- 37.
  8. Liu XY, Dai GC. Surface modification and micromechanical properties of jute fiber mat reinforced polypropylene composites. Express Polym Lett 2007;1:299-307.
  9. Rajesh M, Pitchaimani J. Mechanical Properties of Natural Fiber Braided Yarn Woven Composite: Comparison with Conventional Yarn Woven Composite. J Bionic Eng 2017;14:141-50.
  10. Jawaid M, Abdul Khalil HPS, Abu Bakar A. Woven hybrid composites: Tensile and flexural properties of oil palm-woven jute fibres based epoxy composites. Mater Sci Eng A 2011;528:5190-5. https://doi.org/10.1016/j.msea.2011.03.047 [11] Živković I, Fragassa C, Pavlović A, Brugo T. Influence of moisture absorption on the impact properties of flax, basalt and hybrid flax/basalt fiber reinforced green composites. Compos Part B Eng 2017;111:148-64.
  11. Sanjay M, Yogesha B. Studies on Natural/Glass Fiber Reinfor