KaydedilenlerDerginizi ekleyin

Dergiler / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 3

Comparison of the compression characteristics of 2D braided and circular knitted carbon/epoxy composite tubes

Seçkin ERDEN
Mustafa ERTEKİN
Gözde ERTEKİN
Arzu MARMARALID
Sayfa
203–212
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The results imply that braided carbon/epoxy tubes could be more suitable for the cases requiring smaller deformation and higher compressive stresses when compared to the circular knitted ones.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Two-(biaxial and triaxial) and three-dimensional braided fabric structures are generally used as structural components in various industries such as ballistic, aerospace, automotive, energy, medical, marine, construction, and sports applications.
📊
Temel Bulgular & Veri:This study reports the influence of the braiding angle on the compression behaviour of carbon/epoxy tubular composites manufactured based on 2D biaxial braided fabrics, and also their comparison with that of the circular knitted ones.
💡
Sonuç & Katkı:The results imply that braided carbon/epoxy tubes could be more suitable for the cases requiring smaller deformation and higher compressive stresses when compared to the circular knitted ones.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Two-(biaxial and triaxial) and three-dimensional braided fabric structures are generally used as structural components in various industries such as ballistic, aerospace, automotive, energy, medical, marine, construction, and sports applications. Due to the advantages of braided structures like high level of uniformity, near net-shape manufacturing, design flexibility, repairability, low manufacturing cost, and damage resistance capability, braiding process have been preferred widely in the manufacturing of composite products. This study reports the influence of the braiding angle on the compression behaviour of carbon/epoxy tubular composites manufactured based on 2D biaxial braided fabrics, and also their comparison with that of the circular knitted ones. In order to determine the effect of braiding angle, 2D biaxial braids were manufactured by using three different braiding angles (62°, 67°, and 75°). Composite tube specimens were manufactured by vacuum bagging technique and their compression tests were performed. The results imply that braided carbon/epoxy tubes could be more suitable for the cases requiring smaller deformation and higher compressive stresses when compared to the circular knitted ones.

🔖

Bu Makaleye Atıf Yap

ERDEN, S., ERTEKİN, M., ERTEKİN, G., MARMARALID, A. (2019). Comparison of the compression characteristics of 2D braided and circular knitted carbon/epoxy composite tubes. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 3, 203–212. https://ajindex.com/articles/302649

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Bogdanovich AE. An overview of three-dimensional braiding technologies, in "Advances in Braiding Technology: Specialized Techniques and Applications." Y. Kyosev (Ed.), Elsevier, UK, 2016, 3.
  2. Kyosev Y. Braiding Technology for Textiles, Elsevier, UK, 2015
  3. Hearle JWS. Introduction, in "Advances in 3D Textiles", X. Chen (Ed.), Elsevier, UK, 2015.
  4. Sontag T, Yang H, Gries T, Ko F. Recent advances in 3D braiding technology, in "Advances in 3D Textiles", X.Chen (Ed.), Elsevier, UK, 2015, 154-155. https://doi.org/10.1016/B978- 1-78242-214-3.00007-3 [5] Laourine E. Braided semifinished products and braiding techniques, in "Textile Materials for Lightweight Constructions", C. Cherif (Ed.), Springer-Verlag, Germany, 2016, 291.
  5. Alagirusamy R, Padaki NV. Introduction to braiding, in "Braided Structures and Composites", S. Rana and R. Fangueiro (Eds.), CRC Press, Boca Raton, 2016, 9, 14-15
  6. Gao YT, Ko FK, Hu H. Integrated design for manufacturing of braided preforms for advanced composites Part I: 2D braiding. Applied Composite Materials, 2013;20(6): 1007- 1023.
  7. Legrand X, Cochrane C, Koncar V. A complex shaped-reinforced thermoplastic composite part made of commingled yarns with an integrated sensor, in "Smart Textiles and Their Applications", V. Koncar (Ed.), Elsevier, UK, 2016, 355. https://doi.org/10.1016/B978-0- 08-100574-3.00016-3 [9] Gries T, Stueve J, Grundmann T, Veit D. Textile structures for load-bearing applications in automobiles, in "Textile Advances in Automotive Industry", R. Shishoo (Ed.), CRC Press Boca Raton, 2008, 304
  8. Arold B, Gessler A, Metzner C, Birkefeld K. Braiding processes for composite manufacture, in "Advances in Composites Manufacturing and Process Design", P. Boisse (Ed.), Elsevier, UK, 2015.
  9. Carey JP. Introduction to braided composites, in "Handbook of Advances in Braided Composite Materials", J.P. Carey (Ed.), Elsevier, UK, 2017. https://doi.org/10.1016/B978- 0-08-100369-5.00001-5 [12] Cichosz JA. (2016). Experimental characterization and numerical modelling of the mechanical response for biaxial braided composites. Dissertation, Technischen Universität München
  10. Ahn H, Kim K, Park S.Y, Huh J.E, Kim H.J, Yu W-R. 3D braid scaffolds for regeneration of articular