Dergiler / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 1

Finite element analysis of transient thermal performance of a convective-radiative cooling fin: effects of fin tip conditions and magnetic field

Sayfa
43–74
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It is hope that the present study will enhance the understanding of transient thermal response of the solid fin under various factors and fin tip conditions.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The wide range of applications of cooling fins are evident in heat transfer enhancements for various thermal systems and also, for the control and prevention of thermal damages in mechanical and electronic equipment.
📊
Temel Bulgular & Veri:Based on the numerical investigations, it is established that increase in Biot number, convective, radiative and magnetic parameters increase the rate of heat transfer from the fin and consequently improve the efficiency of the cooling fin.
💡
Sonuç & Katkı:It is hope that the present study will enhance the understanding of transient thermal response of the solid fin under various factors and fin tip conditions.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

The wide range of applications of cooling fins are evident in heat transfer enhancements for various thermal systems and also, for the control and prevention of thermal damages in mechanical and electronic equipment. In this work, nonlinear thermal behaviour of convective-radiative cooling fin with convective tip and subjected to magnetic field is analyzed using Galerkin finite element method. The numerical solutions are verified by the exact analytical solution of the linearized models using Laplace transforms method. Based on the numerical investigations, it is established that increase in Biot number, convective, radiative and magnetic parameters increase the rate of heat transfer from the fin and consequently improve the efficiency of the cooling fin. Also, the study shows that for a relatively short cooling fin operating for prolonged periods of time or steady state, the adiabatic/hypothetical condition (or negligible heat transfer) at the tip can be assumed without any significant loss in accuracy or equality as compared to the convective condition at the tip. However, for a long cooling fin of finite length operating in a transient state, especially for short period of time, the assumption of insulated tip produces significant different results as compared to the results of the convective tip. Therefore, for transient thermal studies of fins, the assumption that no heat transfer takes place at the fin tip should be taken with caution for a long cooling fin of finite length operating within a relatively short period of time. It is hope that the present study will enhance the understanding of transient thermal response of the solid fin under various factors and fin tip conditions.

🔖

Bu Makaleye Atıf Yap

SOBAMOWO, M. G. (2019). Finite element analysis of transient thermal performance of a convective-radiative cooling fin: effects of fin tip conditions and magnetic field. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 1, 43–74. https://ajindex.com/articles/302648

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. P. Y. Wang P.Y., G. C. Kuo, Y. H. Hu, W. L. Liaw. Transient temperature solutions of a cylindrical fin with lateral heat loss, Wseas Transactions on Mathematics, 11(10) (2012), 918-925
  2. R. J. Moitsheki, C. Harley. Transient heat transfer in longitudinal fins of various profiles with temperature-dependent thermal conductivity and heat transfer coefficient, PRAMANA, 77(3) (2011), 519–532.
  3. M. D. Mhlongo, R. J. Moitsheki. Some exact solutions of nonlinear fin problem for steady heat transfer in longitudinal fin with different profiles, Advances in Mathematical Physics, 2014, 1-16.
  4. S. A. Ali, A. H. Bokhari, F. D. Zaman. A Lie symmetry classification of a nonlinear fin equation in cylindrical coordinates, Abstract and Applied Analysis, 2014, 1-10.
  5. A.H.A Kader, M.S.A. Latif and H. M. Nour. General exact solution of the fin problem with variable thermal conductivity, Propulsion and Power Research, 5(1))2016), 63-69
  6. R. J. Moitsheki and A. Rowjee. Steady heat transfer through a two- dimensional rectangular straight fin, Mathematical Problems in Engineering, 2011, 1-13.
  7. K.D. Cole, Computer programs for temperature in fins and slab bodies with the method of Green's functions, Comput. Appl. Eng. Educ. 12 (3) (2004) 189–197.
  8. A. Jordan, S. Khaldi, M. Benmouna, A. Borucki. Study of non-linear heat transfer problems, Revue Phys. Appl., 22(1987),101-105.
  9. B. Kundu, P.K. Das. Performance analysis and optimization of straight taper fins with variable heat transfer coefficient, International Journal of Heat and Mass Transfer, 45(2002), 4739- 4751.
  10. F. Khani, M. A. Raji, H. H. Nejad. Analytical solutions and efficiency of the nonlinear fin problem with temperature-dependent thermal conductivity and heat transfer coefficient, Commun Nonlinear Sci Numer Simulat, 14(2009), 3327-3338.
  11. S. R. Amirkolei and D. D. Ganji D.D. Thermal performance of a trapezoidal and rectangular profiles fin with temperature-dependent heat transfer coefficient, thermal conductivity and emissivity, Indian J. Sci. Res., 1(2)(2014), 223-229
  12. A. Aziz, M. N. Bouaziz. A least squares method for a longitudinal fin with temperature dependent int