Dergiler / Research on Engineering Structures and Materials / 2018 / Cilt: 4 - Sayı: 1

Experimental analysis of premixed and non-premixed methane flames by using a new combustion system

Sayfa
1–14
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Therefore, it can be concluded that complete combustion has been nearly achieved by the premixed methane burner.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This paper deals with combustion of premixed and diffusion methane flames.
📊
Temel Bulgular & Veri:Premixed and diffusion burners with a capacity of 10 kW have been used so as to burn the methane during the experiments.
💡
Sonuç & Katkı:Therefore, it can be concluded that complete combustion has been nearly achieved by the premixed methane burner.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

This paper deals with combustion of premixed and diffusion methane flames. Temperature and emission measurements of premixed and diffusion methane flames have been carried out in the present study. A new combustion system including burners and combustor has been designed and manufactured in order to determine the temperature and emission values of methane flames throughout the combustor. This combustion system includes burners, combustor, gas and air lines, regulators, manometers, flowmeters and so on. Premixed and diffusion burners with a capacity of 10 kW have been used so as to burn the methane during the experiments. Temperatures have been determined by using thermocouples throughout the combustor. Emission values have also been measured via a flue gas analyzer throughout the combustor. The results show that the maximum flame temperatures have been measured as of 1230°C under the premixed flame conditions and as of 1193°C under the diffusion flame conditions. When it comes to emission measurements, it may be said that the maximum NOX and CO2 emission levels form in the flame region while minimum CO formations emerge in the same region under the premixed combustion conditions due to the complete combustion conditions in the premixed burner. Therefore, it can be concluded that complete combustion has been nearly achieved by the premixed methane burner.

🔖

Bu Makaleye Atıf Yap

İLBAŞ, M., KARYEYEN, S. (2018). Experimental analysis of premixed and non-premixed methane flames by using a new combustion system. Research on Engineering Structures and Materials, Cilt: 4 - Sayı: 1, 1–14. https://ajindex.com/articles/302623

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. van Oijen JA, de Goey LPH, Roekaerts DJEM. International Combustion Institute Winter School on Combustion, Lecture Note, 2016. van Essen VM, Sepman AV, Mokhov AV, Levinsky HB. Pressure dependence of NO formation in laminar fuel-rich premixed CH4/air flames", Combustion and Flame, 2008; 153: 434-441. https://doi.org/10.1016/j.combustflame.2007.10.006
  2. Bidi M, Hosseini R, Nobari MRH. Numerical analysis of methane-air combustion considering radiation effect, Energy Conversion and Management, 2008; 49: 3634- 3647. https://doi.org/10.1016/j.enconman.2008.07.010
  3. Brookes SJ, Moss JB. Measurements of soot production and thermal radiation from confined turbulent jet diffusion flames of methane, Combustion and Flame, 1999; 116: 49-61. https://doi.org/10.1016/S0010-2180(98)00027-3
  4. Boke YE, Aydin O, Yildizay HD. The comparison of experimental and predicted flame temperature of natural gas combustion, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 2011; 33: 1271-1280. https://doi.org/10.1080/15567030903330892
  5. Keramida EP, Liakos HH, Founti MA, Boudouvis AG, Markatos NC. Radiative heat transfer in natural gas-fired furnaces, International Journal of Heat and Mass Transfer, 2000; 43: 1801-1809. https://doi.org/10.1016/S0017-9310(99)00244-6
  6. Feyz ME, Esfahani JA, Pishbin I, Modarres Razavi SMR. Effect of recess length on the flame parameters and combustion performance of a low swirl burner, Applied Thermal Engineering, 2015; 89: 609-617. https://doi.org/10.1016/j.applthermaleng.2015.06.007
  7. Fang W, Xiang X, Qi J, Lixing Z. Effect of turbulence on NO formation in swirling combustion, Chinese Journal of Aeronautics, 2014; 27: 797-804. https://doi.org/10.1016/j.cja.2014.05.004
  8. Saqr KM, Aly HS, Siea MM, Wahid MA. Effect of free stream turbulence on NOX and soot formation in turbulent diffusion CH4-air flames, International Communications in Heat and Mass Transfer, 2010; 37: 611-617. https://doi.org/10.1016/j.icheatmasstransfer.2010.02.008
  9. Khelil A, Naji H, Loukarfi L, Mompean G. Prediction of a high swirled natural gas diffusion flame using a PDF model, FUEL, 2009; 88: 374-381. https://doi.org/10.1016/j.fuel.2008.09.008
  10. Fackler KB, Karalus MF, Novosselov IV, Kramlich JC, Malte PC, Experimental and numerical study of NOx formation from the lean premixed combustion of CH4 mixed with CO2 and N2, ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, 2011; 55-63.
  11. Lieuwen T, Torres H, Jonhson C, Zinn BT, A Mechanism of Combustion Instability in