In usage of seawater, the mechanical properties were observed to be the best in 3 % added SiO2-epoxy nanocomposite material.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In this study, dispersion of nano SiO2 in epoxy composite aged in seawater and its effect on mechanical properties were studied.
📊
Temel Bulgular & Veri:The SiO2-epoxy polymer nanocomposite materials were kept in seawater for a total of six months to be tested every two months.
💡
Sonuç & Katkı:In usage of seawater, the mechanical properties were observed to be the best in 3 % added SiO2-epoxy nanocomposite material.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Özet
In this study, dispersion of nano SiO2 in epoxy composite aged in seawater and its effect on mechanical properties were studied. The SiO2-epoxy polymer nanocomposite materials were kept in seawater for a total of six months to be tested every two months. Tensile and bending tests were applied to composite materials as a mechanical test. According to the mechanical test results, there was less decrease in strength in SiO2-epoxy polymer nanocomposite material compared to unmodified material. In usage of seawater, the mechanical properties were observed to be the best in 3 % added SiO2-epoxy nanocomposite material.
🔖
Bu Makaleye Atıf Yap
KAYBAL, H. B., ULUS, H., TATAR, A. C., DEMİR, O., AVCIE, A. (2019). Influence of seawater on mechanical properties of SiO2-epoxy polymer nanocomposites. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 2, 147–154. https://ajindex.com/articles/302621
Kalogeras IM, Roussos M, Christakis I, Spanoudaki A, Pietkiewicz D, Brostow W, et al. Dielectric properties of cured epoxy resin+ poly (ethylene oxide) blends. Journal of non-crystalline solids. 2005;351(33-36):2728-34.
Maity T, Samanta B, Dalai S, Banthia A. Curing study of epoxy resin by new aromatic amine functional curing agents along with mechanical and thermal evaluation. Materials Science and Engineering: A. 2007;464(1-2):38-46.
Shi H, Liu F, Yang L, Han E. Characterization of protective performance of epoxy reinforced with nanometer-sized TiO2 and SiO2. Progress in Organic Coatings. 2008;62(4):359-68.
Zheng Y, Zheng Y, Ning R. Effects of nanoparticles SiO2 on the performance of nanocomposites. Materials Letters. 2003;57(19):2940-4.
Song G. Polymeric nano-metered composites. Mater Rep. 1996;4(1):57-60
Ulus H, Şahin ÖS, Avcı A. Enhancement of flexural and shear properties of carbon fiber/epoxy hybrid nanocomposites by boron nitride nano particles and carbon nano tube modification. Fibers and Polymers. 2015;16(12):2627-35.
Wang L, Wang K, Chen L, Zhang Y, He C. Preparation, morphology and thermal/mechanical properties of epoxy/nanoclay composite. Composites Part A: Applied Science and Manufacturing. 2006;37(11):1890-6.
Liu Y-L, Hsu C-Y, Wei W-L, Jeng R-J. Preparation and thermal properties of epoxy-silica nanocomposites from nanoscale colloidal silica. Polymer. 2003;44(18):5159-67.
Rafiee MA, Rafiee J, Srivastava I, Wang Z, Song H, Yu ZZ, et al. Fracture and fatigue in graphene nanocomposites. small. 2010;6(2):179-83.
Zhai L, Ling G, Li J, Wang Y. The effect of nanoparticles on the adhesion of epoxy adhesive. Materials Letters. 2006;60(25-26):3031-3.
Bauer F, Decker U, Ernst H, Findeisen M, Langguth H, Mehnert R, et al. Functionalized inorganic/organic nanocomposites as new basic raw materials for adhesives and sealants Part 2. International journal of adhesion and adhesives. 2006;26(7):567-70. https://doi.org