Dergiler / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 4

Analysis of a dolphin by analogy of grid, finite element method with plate element and equivalent frame method

Sayfa
427–436
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Due to the level of simplification of the structure, the equivalent frame models presented the greatest internal forces, followed by the grid analogy model and finally, the finite element model.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Port structures are usually composed of large structural elements and support heavy loads.
📊
Temel Bulgular & Veri:The determination of the maximum and minimum internal forces generated by these loads is very important for the design of these harbor constructions.
💡
Sonuç & Katkı:Due to the level of simplification of the structure, the equivalent frame models presented the greatest internal forces, followed by the grid analogy model and finally, the finite element model.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Port structures are usually composed of large structural elements and support heavy loads. The determination of the maximum and minimum internal forces generated by these loads is very important for the design of these harbor constructions. Therefore, the structural analysis of these structures must be rigorous, using robust numerical methods in order to obtain safety level in the design. Furthermore, this work aims the analysis of a breasting dolphin, composed of twenty steel piles, which are joined by a reinforced concrete block. The structural analysis was carried out in the dolphin’s block through the following methods of analysis: Finite Element Method; Grid Analogy; and Equivalent Frame Method. As a result, a comparison was established between a maximum and minimum internal force (normal compressive force and bending moment) given by the three methods. Due to the level of simplification of the structure, the equivalent frame models presented the greatest internal forces, followed by the grid analogy model and finally, the finite element model.

🔖

Bu Makaleye Atıf Yap

LOPES, W., MOURAB, M., VIEGAS, C., REAL, M. (2019). Analysis of a dolphin by analogy of grid, finite element method with plate element and equivalent frame method. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 4, 427–436. https://ajindex.com/articles/302617

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Araújo JM. Curso de concreto armado (4 ed., Vol. 3). Rio Grande: Dunas, 2014
  2. Associação Brasileira de Normas Técnicas. NBR 6118: Projeto de estruturas de concreto - procedimento. Rio de Janeiro: ABNT, 2014
  3. Computers and Structures, Inc. CSI Analysis Reference Manual - SAP2000 Advanced 14.2.2. University Avenue: Berkeley, 2010
  4. Fentek. Marine Fendering Systems. Hamburg: Fentek, 2008
  5. Martha LF. Ftool - Um programa gráfico-interativo para ensino de comportamento de estruturas. Rio de Janeiro: Tecgraf/PUC- Rio, 2018
  6. Mason J. Obras portuárias. Rio de Janeiro: Campus, 1981
  7. PIANC (International Navigation Association). Guidelines for the Design of Fender System. Report of Working Group 33. Bruxelas: PIANC, 2014
  8. Tsinker GP. Port Engineering - Planning, Construction, Maintenance, and Security. Hoboken: John Wiley & Sons, Inc, Michigan, 2004
  9. Vaz LE. Método dos Elementos Finitos em análise de estruturas. Rio de Janeiro: Elsevier, 2011.