Dergiler / Research on Engineering Structures and Materials / 2019 / Cilt: 5 - Sayı: 4

Estimation of the piles axial load in the Public Wharf of Porto Novo during an operation of a port crane

Sayfa
347–353
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

This study will be intended to perform the computational modeling of the Public Wharf of Porto Novo of the Port of Rio Grande using the finite element method through the ANSYS software to estimate the axial loads of the wharf piles when a Mobile Port Crane is in port operation.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Port structures are usually large and are subject to heavy loads such as the stresses caused by a port crane and other equipment used during a port operation.
📊
Temel Bulgular & Veri:Therefore, for a meticulous analysis of the internal forces of the port structures, with the intention to optimize and turn more effective the design, is essential the use of computational tools and advanced mathematical methods, as, for example, the Finite Elements Method.
💡
Sonuç & Katkı:This study will be intended to perform the computational modeling of the Public Wharf of Porto Novo of the Port of Rio Grande using the finite element method through the ANSYS software to estimate the axial loads of the wharf piles when a Mobile Port Crane is in port operation.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Port structures are usually large and are subject to heavy loads such as the stresses caused by a port crane and other equipment used during a port operation. Therefore, for a meticulous analysis of the internal forces of the port structures, with the intention to optimize and turn more effective the design, is essential the use of computational tools and advanced mathematical methods, as, for example, the Finite Elements Method. The Porto Novo of the Port of Rio Grande moves millions of tons of materials per year, becoming one of the main ports in Brazil. Its structure has gone through two stages of modernization making it possible the use of larger and more efficient port equipment, operation with ships of greater load capacity, and more quantity of mooring berths available for simultaneous operation. This study will be intended to perform the computational modeling of the Public Wharf of Porto Novo of the Port of Rio Grande using the finite element method through the ANSYS software to estimate the axial loads of the wharf piles when a Mobile Port Crane is in port operation.

🔖

Bu Makaleye Atıf Yap

NUNES, M. D. L., REALB, M. D. V. (2019). Estimation of the piles axial load in the Public Wharf of Porto Novo during an operation of a port crane. Research on Engineering Structures and Materials, Cilt: 5 - Sayı: 4, 347–353. https://ajindex.com/articles/302609

Kaynakça (6)

  1. Ranga Rao AV, Sundaravadivelu R. A knowledge-based expert system for design of berthing structures. Ocean Engineering, 1999, 26, 653–673.
  2. Alfredini P, Arasaki E. Obras e Gestão de Portos e Costas. Blucher, São Paulo, SP, Brazil, 2009
  3. Ansys. Basic Analysis Guide.Ansys Inc, Canonsburg, PA, USA, 2009
  4. Davisson MT, Robinson K.E. Bending and buckling of partially embedded piles. In 6th ICSMFE, 1965
  5. Urbano AR. Dimensionamento de Fundações Profundas. Blucher, São Paulo, SP, Brazil, 2003
  6. Viegas CHH, Real MV, Moura MW. Structural analysis of a container pier through the finite element method. Revista de Engenharia e Tecnologia, 2015, 7: 1 – 12.