KaydedilenlerDerginizi ekleyin

Dergiler / Gazi University Journal of Science / 2011 / Cilt: 24 - Sayı: 1

A Machinability Study of Granite Using Abrasive Waterjet Cutting Technology

İzzet KARAKURT
Gökhan AYDIN
Kerim AYDIN
Sayfa
143–151
Yayın Tarihi
2011-01-14
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result of the study, it was determined that the highly effective parameters on the cut depth were the traverse speed, the abrasive flow rate and the abrasive size, although all the process parameters were found to be highly effective on the kerf width of the granite.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Abrasive waterjet (AWJ) machining is one of the non-traditional machining processes which have been used extensively in various industries.
📊
Temel Bulgular & Veri:Major significant process factors affecting the cut depth and kerf width were determined.
💡
Sonuç & Katkı:As a result of the study, it was determined that the highly effective parameters on the cut depth were the traverse speed, the abrasive flow rate and the abrasive size, although all the process parameters were found to be highly effective on the kerf width of the granite.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Abrasive waterjet · Granite · Cut depth

Abstract

Abrasive waterjet (AWJ) machining is one of the non-traditional machining processes which have been used extensively in various industries. It offers some advantages like narrow kerf width, reduced waste material and flexibility to machining process in different shapes. In this study, abrasive waterjet machining of the granite was experimentally investigated for various process parameters in terms of the cut depth and kerf width. The design philosophy of Taguchi was followed to conduct experiments. Analysis of variance was used to evaluate data obtained statistically. Major significant process factors affecting the cut depth and kerf width were determined. Additionally, effects of the process parameters on the cut depth and kerf width were presented by mean responses in detail. As a result of the study, it was determined that the highly effective parameters on the cut depth were the traverse speed, the abrasive flow rate and the abrasive size, although all the process parameters were found to be highly effective on the kerf width of the granite.

🔖

Bu Makaleye Atıf Yap

KARAKURT, İ., AYDIN, G., AYDIN, K. (2011). A Machinability Study of Granite Using Abrasive Waterjet Cutting Technology. Gazi University Journal of Science, Cilt: 24 - Sayı: 1, 143–151. https://ajindex.com/articles/254984

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Polini, W., Turchetta, S., “Force and specific energy in stone cutting by diamond mill”, Int. Journal of Machine Tools&Manufacture; Design, Research and Application., 44: 1189-1196 (2004).
  2. Reinhart, K.D., “Surface machining of natural and artificial stone”, Ind. Diamond. Rev., 59 (580): 17-25 (1999).
  3. Büyüksağiş, I.S., Göktan, R.M., “Investigation of marble machining performance using an instrumented block-cutter”, Journal of Materials Processing Technology, 169: 258-262 (2005).
  4. Wang, J., “Particle velocity models for ultra-high pressure abrasive waterjets”, Journal of Materials Processing Technology, 209: 4573-4577 (2009).
  5. Valicek, J., Drzik, M., Ohlidal, M., Madr, V., Hlavac, L.M., “Optical method for surface analyses and their utilization for abrasive liquid jet automation”, Proceedings of the American Waterjet Conference (WJTA), Minneapolis, Minnesota, 1–11 (2001).
  6. Bortolussi, A., Yazici, S., Summers, D.A., “The use of waterjets in cutting granite”, 9th International Symposium on Jet Cutting Technology, Sendai – Japan, (1988).
  7. Miranda, M.R., Quintino, L., “Microstructural study of material removal mechanisms observed in abrasive waterjet cutting of calcareous stones”, Materials Characterization, 54: 370 – 377 (2005).
  8. Liu, Y., Chen, X., “A Study on the abrasive water jet cutting for granite”, Key Engineering Materials, 257–258: 527–532 (2004).
  9. Hashish, M., “Cutting with abrasive waterjets”, Mechanical Engineering, January, 69-96 (1984a).
  10. Hashish, M., “A modelling study of metal cutting with abrasive waterjets”, ASME J. Eng. Mater. Tech., 106 (1): 88-100 (1984b).
  11. Hashish, M., “Material properties in abrasive waterjet machining”, Trans. ASMI: J. Eng. Ind., 117: 578–583 (1995).
  12. Zeng, J., Kim, T.J., “Development of an abrasive waterjet kerf cutting model for brittle materials”, 11th. International Conference on Jet Cutting Technology, St. Andrews. Scotland, 483–501 (1992).
  13. Duflou, J.R., Kruth, J.P, Bohez, E.L., “Contour cutting of pre-formed parts with abrasive waterjet using 3-axis nozzle control”, Journal of Materials Processing Technology, 115: 38-43 (2001).
  14. Yang, W.H., Tarng, Y.S., “Design optimization of cutting parameters for turning operations based on the Taguchi method”, Journal of Materials Processing Tech., 84: 122–129 (1998).
  15. Davim, J.P., “Design of optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays”, Journal of Materials Processing Tech., 132: 340–344 (2003).
  16. Guo, N.S., Louis, G., “Meier, surfa