Dergiler / Turkish Journal of Agriculture and Forestry / 2002 / Cilt: 26 - Sayı: 3

Effects of Surface Coating Materials on the Thermal Conductivity and Combustion Properties of Particleboard

Sayfa
155–160
Yayın Tarihi
2002-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

A standard including the thermal conductivity values of coated and uncoated particleboard should be prepared.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The specific properties of particleboard samples used in this study were as follows: 280x210x1.8 cm dimensions, 0.68 g/cm3 specific gravity.
📊
Temel Bulgular & Veri:Surface coating materials increased the thermal conductivity.
💡
Sonuç & Katkı:A standard including the thermal conductivity values of coated and uncoated particleboard should be prepared.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Particleboard · melamine paper · lacquered paint

Özet

The specific properties of particleboard samples used in this study were as follows: 280x210x1.8 cm dimensions, 0.68 g/cm3 specific gravity. Produced boards were coated with lacquered paint, melamine impregnated papers, wood veneers and continue press laminates. The effects of surface coating material type, melamine paper weight, wood veneer type and thickness, and continue press laminate thickness on the thermal conductivity and combustion properties of particleboard were investigated. Results showed that surface coating material type was found to affect these properties. Melamine paper weight and wood veneer thickness did not affect the thermal conductivity and combustion properties of particleboard samples. Wood veneer type and continue press laminate thickness affected these properties. Surface coating materials increased the thermal conductivity. Coated particleboard was more combustible than uncoated particleboard. Additional work is needed to improve the fire retardancy properties of these materials. A standard including the thermal conductivity values of coated and uncoated particleboard should be prepared.

Abstract

The specific properties of particleboard samples used in this study were as follows: 280x210x1.8 cm dimensions, 0.68 g/cm3 specific gravity. Produced boards were coated with lacquered paint, melamine impregnated papers, wood veneers and continue press laminates. The effects of surface coating material type, melamine paper weight, wood veneer type and thickness, and continue press laminate thickness on the thermal conductivity and combustion properties of particleboard were investigated. Results showed that surface coating material type was found to affect these properties. Melamine paper weight and wood veneer thickness did not affect the thermal conductivity and combustion properties of particleboard samples. Wood veneer type and continue press laminate thickness affected these properties. Surface coating materials increased the thermal conductivity. Coated particleboard was more combustible than uncoated particleboard. Additional work is needed to improve the fire retardancy properties of these materials. A standard including the thermal conductivity values of coated and uncoated particleboard should be prepared.

🔖

Bu Makaleye Atıf Yap

NEMLİ, G., KALAYCIOĞLU, H. (2002). Effects of Surface Coating Materials on the Thermal Conductivity and Combustion Properties of Particleboard. Turkish Journal of Agriculture and Forestry, Cilt: 26 - Sayı: 3, 155–160. https://ajindex.com/articles/204216

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...