Dergiler / Turkish Journal of Agriculture and Forestry / 2002 / Cilt: 26 - Sayı: 3

Principal Mechanical Properties of Eastern Beech Wood (Fagus orientalis Lipsky) Naturally Grown in Andırın Northeastern Mediterranean Region of Turkey

Sayfa
147–154
Yayın Tarihi
2002-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result of this comparison, it was observed that Eastern beech trees growing in Andırın and other beeches have similar mechanical properties and density.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The aim of this study was to determine some mechanical properties (compression, static bending, impact bending and shear strengths) of Eastern beech wood (Fagus orientalis Lipsky) and to compare with them other beech species.
📊
Temel Bulgular & Veri:In the tests, randomly selected logs taken from the trunk 2-4 m height were obtained from trees naturally growing in Andırın (Northeastern Mediterranean region) and these logs were prepared and tested according to Turkish standards.
💡
Sonuç & Katkı:As a result of this comparison, it was observed that Eastern beech trees growing in Andırın and other beeches have similar mechanical properties and density.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Eastern beech (Fagus orientalis Lipsky) · compression strength · static bending strength

Özet

The aim of this study was to determine some mechanical properties (compression, static bending, impact bending and shear strengths) of Eastern beech wood (Fagus orientalis Lipsky) and to compare with them other beech species. In the tests, randomly selected logs taken from the trunk 2-4 m height were obtained from trees naturally growing in Andırın (Northeastern Mediterranean region) and these logs were prepared and tested according to Turkish standards. The results showed that the mean compression strength was 606 kgcm-2, static bending strength 1204 kgcm-2, impact bending strength 0.85 kgmcm-2 and shear strength 99 kgcm-2. The relations of strengths with density were determined with regression analyses, and these were compared with other available values in the literature. As a result of this comparison, it was observed that Eastern beech trees growing in Andırın and other beeches have similar mechanical properties and density.

Abstract

The aim of this study was to determine some mechanical properties (compression, static bending, impact bending and shear strengths) of Eastern beech wood (Fagus orientalis Lipsky) and to compare with them other beech species. In the tests, randomly selected logs taken from the trunk 2-4 m height were obtained from trees naturally growing in Andırın (Northeastern Mediterranean region) and these logs were prepared and tested according to Turkish standards. The results showed that the mean compression strength was 606 kgcm-2, static bending strength 1204 kgcm-2, impact bending strength 0.85 kgmcm-2 and shear strength 99 kgcm-2. The relations of strengths with density were determined with regression analyses, and these were compared with other available values in the literature. As a result of this comparison, it was observed that Eastern beech trees growing in Andırın and other beeches have similar mechanical properties and density.

🔖

Bu Makaleye Atıf Yap

BEKTAŞ, İ. (2002). Principal Mechanical Properties of Eastern Beech Wood (Fagus orientalis Lipsky) Naturally Grown in Andırın Northeastern Mediterranean Region of Turkey. Turkish Journal of Agriculture and Forestry, Cilt: 26 - Sayı: 3, 147–154. https://ajindex.com/articles/204215

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...