KaydedilenlerDerginizi ekleyin

Dergiler / Turkish Journal of Chemistry / 2005 / Cilt: 29 - Sayı: 1

Synthesis and Characterization of Novel Hyperbranched Polyimides Based on Silsesquioxane Nanocomposite Networks

Turgay SEÇKİN
Ahmet GÜLTEK
Süleyman KÖYTEPE
Sayfa
49–59
Yayın Tarihi
2005-01-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

These polyimides are readily soluble in polar aprotic solvents such as 1-methyl-2-pyrrolidone, and N,N-dimethylacetamide at room temperature, and show high thermal stability with a 10% weight loss, Td = 441 to 593 °C in N2.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:A series of nanosized polyimides was successfully prepared by condensation polymerization of an octaamino-functionalized silsesquioxane and a series of commercially available dianhyride monomers.
📊
Temel Bulgular & Veri:The polymerization of the octaamino silsesquioxane was carried out in 1-methyl-2-pyrrolidone (NMP) at room temperature, giving poly(amic acid) as precursor polymers that were readily converted to the corresponding polyimides by thermal treatment in the subsequent step, which is similar to the conventional 2-stage method.
💡
Sonuç & Katkı:These polyimides are readily soluble in polar aprotic solvents such as 1-methyl-2-pyrrolidone, and N,N-dimethylacetamide at room temperature, and show high thermal stability with a 10% weight loss, Td = 441 to 593 °C in N2.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Polyimides · hybrid materials · nano materials

Özet

A series of nanosized polyimides was successfully prepared by condensation polymerization of an octaamino-functionalized silsesquioxane and a series of commercially available dianhyride monomers. The polymerization of the octaamino silsesquioxane was carried out in 1-methyl-2-pyrrolidone (NMP) at room temperature, giving poly(amic acid) as precursor polymers that were readily converted to the corresponding polyimides by thermal treatment in the subsequent step, which is similar to the conventional 2-stage method. The appropriate molar ratio of the silsesquioxane monomer to a dianhyride was 1:1. These polyimides are readily soluble in polar aprotic solvents such as 1-methyl-2-pyrrolidone, and N,N-dimethylacetamide at room temperature, and show high thermal stability with a 10% weight loss, Td = 441 to 593 °C in N2.

Abstract

A series of nanosized polyimides was successfully prepared by condensation polymerization of an octaamino-functionalized silsesquioxane and a series of commercially available dianhyride monomers. The polymerization of the octaamino silsesquioxane was carried out in 1-methyl-2-pyrrolidone (NMP) at room temperature, giving poly(amic acid) as precursor polymers that were readily converted to the corresponding polyimides by thermal treatment in the subsequent step, which is similar to the conventional 2-stage method. The appropriate molar ratio of the silsesquioxane monomer to a dianhyride was 1:1. These polyimides are readily soluble in polar aprotic solvents such as 1-methyl-2-pyrrolidone, and N,N-dimethylacetamide at room temperature, and show high thermal stability with a 10% weight loss, Td = 441 to 593 °C in N2.

🔖

Bu Makaleye Atıf Yap

SEÇKİN, T., GÜLTEK, A., KÖYTEPE, S. (2005). Synthesis and Characterization of Novel Hyperbranched Polyimides Based on Silsesquioxane Nanocomposite Networks. Turkish Journal of Chemistry, Cilt: 29 - Sayı: 1, 49–59. https://ajindex.com/articles/185455

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (28)

  1. J.E. Mark, C.Y. Lee and P.A. Bianconi, Hybrid organic–inorganic composites. American Chemical Society, Washington DC, (1995).
  2. G. Li, L. Wang, H. Ni and C.U. Pittman, J. Inorg. Organomet. P., 11, 123-154 (2001).
  3. F.J. Feher, D. Soulivong and A.G. Eklund, Chem. Commun., 399-400 (1998).
  4. F.J. Feher, K.D. Wyndham and D.J. Knauer, Chem. Commun., 2393-2394 (1998).
  5. F.J. Feher, D. Soulivong, A.G. Eklund and K.D.Wyndham, Chem. Commun., 1185-1186 (1997).
  6. F.J. Feher, K.D. Wyndham, M.A. Scialdone and Y. Hamuro, Chem. Commun., 1469-1470 (1998).
  7. R. Tamaki, Y. Tanaka, M.Z. Asuncion, J. Choi and R.M. Laine, J. Am. Chem. Soc. 123, 12416-12417 (2001).
  8. E.S. Baker, J. Gidden, D.P. Fee, P.R. Kemper, S.E. Anderson and M.T. Bowers, Int. J. Mass. Spectrom.,, 205-216 (2003).
  9. T. Kudo and M.S. Gordon, J. Am. Chem., 120, 11432-11438 (1998).
  10. A. Sellinger and R.M. Laine, Macromolecules, 29, 2327-2334 (1996).
  11. T. Kurosaki, Chem. Mater., 9, 1362-1370 (1997).
  12. S. Morooka, Ind. Eng. Chem. Res., 36, 2134-2140 (1997).
  13. T.S. Haddad, B.D. Viers and S.H. Phillips, J. Inorg. Organomet. P., 11, 155-164 (2001).
  14. R. Tamaki, J. Choi and R.M. Laine, Chem. Mater., 15, 793-818 (2003).
  15. C.M. Leu, Y.T. Chang and K.H. Wei, Chem. Mater., 15, 3721-3727 (2003). M.K. Ghosh and K.L. Mittal, (eds) Polyimides: Fundamentals and Applications, Marcel Dekker, New York (1996).
  16. T. Omote, T. Yamaoka and K. Koseki, J. Appl. Polym. Sci., 38, 389 (1989).
  17. R.H. Vora, S.H. Goh and T.S. Chung, Polymer Engineering and Science B, 40, 1318-1329 (2000).
  18. H.B. Zheng and Z.Y. Wang, Macromolecules, 33, 4310-4312 (2000).
  19. H. Sekiguchi, Chem. Mater., 10, 734-738 (1998).
  20. T. Seckin, S. Koytepe, S. Demir, I. Ozdemir and B. Centinkaya, J. Inorg. Organomet. P., 13, 223-235 (2003).
  21. T. Seckin, E. Cetinkaya, S. Koytepe and B. Yigit, Polym. Bull., 50, 139-146 (2003).
  22. T. Seckin, S. Koytepe, B. Cetinkaya, I. Ozdemir and B. Yigit, Designed Monomers And Polymers, 6, 185 (2003).
  23. H. Xu, S.W. Kuo, C.F. Huang and F.C. Chang, J. Polym. Res.-Taiwan, 9, 239 (2002).
  24. B.X. Fu, B.S. Hsiao, S. Pagola, P. Stephens, H. White, M. Rafailovich, J. Sokolov, P. T. Mather, H. G. Jeon and S. Phillips, Polymer, 42, 599-604 (2001).
  25. J.C. Huang, C.B. He, Y. Xiao, K.Y. Mya, J. Dai and Y.P. Siow, Polymer, 44 4491-4499 (2003).
  26. C.M. Leu, Y.T. Chang and K.H. Wei, Macromolecules, 36, 9122-9127 (2003).
  27. C.M. Leu, G. M. Reddy, K.-H. Wei and C.-F. Shu, Chem. Mater., 15, 2261-2268 (2003).
  28. T. Seckin, S. Koytepe, I.Ozdemir and B. Cetinkaya, J. Inorg. Organomet. P., 13, 9-20 (2003). T. Seckin,