KaydedilenlerDerginizi ekleyin

Dergiler / Turkish Journal of Chemistry / 2007 / Cilt: 31 - Sayı: 3

Preparation and Properties of Triethoxyvinylsilane-Modified Styrene - Butyl Acrylate Emulsion Copolymers

Hamid Javaherian NAGHASH
Akram KARIMZADEH
Ahmad Reza MOMENI
Ahmad Reza MASSAH
Hamid ALIAN
Sayfa
257–269
Yayın Tarihi
2007-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The monomer conversion and monomer conversion versus time histories indicate that by increasing the TEVS concentration the polymerization rate decreases.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The copolymers of triethoxyvinylsilane (TEVS) with styrene (St), butyl acrylate (BA), and methacrylic acid (MAA) were prepared by emulsion polymerization.
📊
Temel Bulgular & Veri:The copolymerization was carried out by using auxiliary agents at 90 °C in the presence of potassium peroxodisulfate (KPS) as the initiator.
💡
Sonuç & Katkı:The monomer conversion and monomer conversion versus time histories indicate that by increasing the TEVS concentration the polymerization rate decreases.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Triethoxyvinylsilane · emulsion copolymerization · poly (styrene-co- butylacrylate)

Özet

The copolymers of triethoxyvinylsilane (TEVS) with styrene (St), butyl acrylate (BA), and methacrylic acid (MAA) were prepared by emulsion polymerization. The copolymerization was carried out by using auxiliary agents at 90 °C in the presence of potassium peroxodisulfate (KPS) as the initiator. Nonylphenol ethylene oxide -- 40 units (NP-40) and sodium lauryl sulfoacetate (SLSA) were used as nonionic and anionic emulsifiers, respectively. The resulting copolymers were characterized by Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by optical microscopy (OM) and then the effects of temperature, agitation speed, initiator and silicone concentrations on the properties of the silicone-containing St/BA/MAA emulsion copolymers were discussed. The obtained copolymers have high solid content (50%) and can be used in emulsion paints as a binder. The monomer conversion and monomer conversion versus time histories indicate that by increasing the TEVS concentration the polymerization rate decreases.

Abstract

The copolymers of triethoxyvinylsilane (TEVS) with styrene (St), butyl acrylate (BA), and methacrylic acid (MAA) were prepared by emulsion polymerization. The copolymerization was carried out by using auxiliary agents at 90 °C in the presence of potassium peroxodisulfate (KPS) as the initiator. Nonylphenol ethylene oxide -- 40 units (NP-40) and sodium lauryl sulfoacetate (SLSA) were used as nonionic and anionic emulsifiers, respectively. The resulting copolymers were characterized by Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The morphology of copolymers was also investigated by optical microscopy (OM) and then the effects of temperature, agitation speed, initiator and silicone concentrations on the properties of the silicone-containing St/BA/MAA emulsion copolymers were discussed. The obtained copolymers have high solid content (50%) and can be used in emulsion paints as a binder. The monomer conversion and monomer conversion versus time histories indicate that by increasing the TEVS concentration the polymerization rate decreases.

🔖

Bu Makaleye Atıf Yap

NAGHASH, H. J., KARIMZADEH, A., MOMENI, A. R., MASSAH, A. R., ALIAN, H. (2007). Preparation and Properties of Triethoxyvinylsilane-Modified Styrene - Butyl Acrylate Emulsion Copolymers. Turkish Journal of Chemistry, Cilt: 31 - Sayı: 3, 257–269. https://ajindex.com/articles/185004

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (34)

  1. I. Sasaki, A. Yanagase, Y. Kawaachi, T. Mayuzumi, T. Oba and F. Okada, US Pat. 4, 690, 986 (1987).
  2. C. Lindner, L Morbitzer and D. Rempel, Eur. Pat. Appl. 3891905 (1990).
  3. N. Yamamoto, A. Yanagase, T. Iwasak and K. Ito, Jpn. Pat. 06-49313 (1994).
  4. A. Yanagase, A. Nakad and A. Koshirai, Jpn. Pat. 07-207148 (1995).
  5. N. Niessner and W. Fischer, Eur. Pat. Appl. 657480 (1995).
  6. M. Matsumoto, T. Urabe, M. Kato and K. Tamori, Jpn. Pat. 09-208642 (1997).
  7. W.D. He, C.T. Cao and C.Y. Pan, J. Appl. Polym. Sci. 61, 383-388 (1996).
  8. W.D. He, C.T. Cao and C.Y. Pan, Polym. Int. 39, 31-36 (1996).
  9. C.Y. Kan, D.S. Liu and X.Z. Kong, J. Appl. Polym. Sci. 82, 3194-3200 (2001).
  10. K.G. Olson, M.E. Hartman, S.K. Das and R. Dowbenko, Eur. Pat. Appl. 053600 (1985).
  11. A.C. Lavoie, Eur. Pat. 0350240/A2 (1990).
  12. W. Shimozawa and T. Koshio, Jpn. Pat. 03227312 (1991).
  13. D.T. Liles and D.L. Murray, Eur. Pat. Appl. 771826/A2 (1997).
  14. E. Yamada, M. Hasegawa and T. Hattori, Jpn. Pat. 10-152507/A2 (1998).
  15. I. Lee, US. Pat. 5,712,346A (1998).
  16. M. Yamatani, M. Furuya, H. Kisaki and A. Yamamoto, Jpn. Pat. 11-255846 (1999).
  17. C.Y. Kan, Q. Yuan, M.C. Wang and X.Z. Kong, Polym. Adv. Technol. 7, 95-97 (1996).
  18. C.Y. Kan, X.L. Zhu, Q. Yuan and X.Z. Kong, Polym. Adv. Technol. 8, 631-633 (1997).
  19. S.Q. Huang, Z.S. Xu, H. Peng and S.Y. Cheng, J. Appl. Polym. Sci. 71, 2209-2217 (1999).
  20. X.Z. Kong, C.Y. Kan and Q. Yuan, Polym. Adv. Technol. 7, 888-890 (1996).
  21. C.Y. Kan, X.Z. Kong, Q. Yuan and D.S. Liu, J. Appl. Polym. Sci. 80, 2251-2258 (2001).
  22. M.X. Zou and Z.C. Zhang, Polym. Int. 53, 1033-1039 (2004).
  23. N. Grassie, Trans. Faraday. Soc. 48, 379 (1952).
  24. M. Konno, K. Shimizu, K. Arai and S. Saito, J. Polym. Sci. PartA: Polym. Chem. 25, 223-230 (1987).
  25. K. Arai, M. Arai, S. Iwasaki and S. Saito, J. Polym. Sci. Polym. Chem. 20, 1203-1209 (1982).
  26. H. Javaherian Naghash, S. Mallakpour and N. Kayhan, Iranian Polym. J. 14 211-222 (2005).
  27. D.H. Wolf, S. Peter and S.W. Klaus, Polymer, 29, 1328-1335 (1988).
  28. H. Javaherian Naghash, S. Mallakpour and N. Mokhtarian, Progress In Organic Coatings, 55, 375-381 (2006).
  29. O. Maeda, H. Kobayashi and K. Kageishi, Jap. Pat. 26, 691 (2000).
  30. H. Javaherian Naghash, A.R. Momeni, H. Alian, A.R. Massah and S. Ataei, Polym. Int. 54, 1564-1571 (2005).
  31. Z. Sun, W. Ding, J. Liu and J. Li, Shanghai Tuliao, 4, 201-204 (1998).
  32. K. Kumar and K.S. Rana, Iranian Polym. J. 11, 287-293 (2002).
  33. Y. Qiao, J. Yu, D. Song, D. Wang and Z. Hou, Tuliao Gongye, 31, 3-6 (2001).
  34. B. You, X. Chen, D. Li, Q. Feng and L. Wu, Zhanjie, 21, 21-2